Reference number
ISO 6145-7:2009
ISO 6145-7:2009
Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 7: Thermal mass-flow controllers
Edition 2
2009-04
Withdrawn
ISO 6145-7:2009
45471
Withdrawn (Edition 2, 2009)

Abstract

ISO 6145-7:2009 specifies a method for continuous production of calibration gas mixtures, containing two or more components, from pure gases or other gas mixtures by use of commercially available thermal mass-flow controllers.

If this method is employed for the preparation of calibration gas mixtures, the optimum performance is as follows: the relative expanded uncertainty of measurement, U, obtained by multiplying the combined standard uncertainty by a coverage factor k = 2, is not greater than 2 %.

If pre-mixed gases are used instead of pure gases, mole fractions below 10-6 can be obtained. The measurement of mass flow is not absolute and the flow controller requires independent calibration.

The merits of the method are that a large quantity of the gas mixture can be prepared on a continuous basis and that multicomponent mixtures can be prepared as readily as binary mixtures if the appropriate number of thermal mass-flow controllers is utilized.

General information

  •  : Withdrawn
     : 2009-04
    : Withdrawal of International Standard [95.99]
  •  : 2
     : 15
  • ISO/TC 158
    71.040.40 
  • RSS updates

Got a question?

Check out our Help and Support