Filter :
Standard and/or project | Stage | TC |
---|---|---|
Withdrawal of ISO/R 645-1967
|
95.99 | ISO/TC 69 |
Withdrawal of ISO/R 1786-1970
|
95.99 | ISO/TC 69 |
Statistical interpretation of test results — Estimation of the mean — Confidence interval
|
90.93 | ISO/TC 69 |
Statistical interpretation of data — Techniques of estimation and tests relating to means and variances
|
90.93 | ISO/TC 69 |
Sampling procedures for inspection by attributes — Part 0: Introduction to the ISO 2859 attribute sampling system
|
95.99 | ISO/TC 69/SC 5 |
Sampling procedures for inspection by attributes — Part 1: Sampling plans indexed by acceptable quality level (AQL) for lot-by-lot inspection
|
95.99 | ISO/TC 69/SC 5 |
Sampling procedures for inspection by attributes — Part 1: Sampling plans indexed by acceptable quality level (AQL) for lot-by-lot inspection — Technical Corrigendum 1
|
95.99 | ISO/TC 69/SC 5 |
Sampling procedures for inspection by attributes — Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
|
90.92 | ISO/TC 69/SC 5 |
Sampling procedures for inspection by attributes — Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection — Amendment 1
|
60.60 | ISO/TC 69/SC 5 |
Sampling procedures for inspection by attributes — Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection — Technical Corrigendum 1
|
60.60 | ISO/TC 69/SC 5 |
Sampling procedures for inspection by attributes — Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
|
30.99 | ISO/TC 69/SC 5 |
Sampling procedures for inspection by attributes — Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection
|
95.99 | ISO/TC 69/SC 5 |
Sampling procedures for inspection by attributes — Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection
|
60.60 | ISO/TC 69/SC 5 |
Sampling procedures for inspection by attributes — Part 3: Skip-lot sampling procedures
|
95.99 | ISO/TC 69/SC 5 |
Sampling procedures for inspection by attributes — Part 3: Skip-lot sampling procedures
|
90.93 | ISO/TC 69/SC 5 |
Sampling procedures for inspection by attributes — Part 4: Procedures for assessment of stated quality levels
|
95.99 | ISO/TC 69/SC 5 |
Sampling procedures for inspection by attributes — Part 4: Procedures for assessment of declared quality levels
|
95.99 | ISO/TC 69/SC 5 |
Sampling procedures for inspection by attributes — Part 4: Procedures for assessment of declared quality levels
|
60.60 | ISO/TC 69/SC 5 |
Sampling procedures for inspection by attributes — Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection
|
90.20 | ISO/TC 69/SC 5 |
Sampling procedures for inspection by attributes — Part 10: Introduction to the ISO 2859 series of standards for sampling for inspection by attributes
|
95.99 | ISO/TC 69/SC 5 |
Sampling procedures and tables for inspection by attributes
|
95.99 | ISO/TC 69 |
Sampling procedures and tables for inspection by attributes — Addendum 1
|
95.99 | ISO/TC 69 |
Statistical interpretation of data — Determination of a statistical tolerance interval
|
95.99 | ISO/TC 69 |
Statistical interpretation of data — Determination of a statistical tolerance interval — Addendum 1
|
95.99 | ISO/TC 69 |
Statistical interpretation of data — Comparison of two means in the case of paired observations
|
90.93 | ISO/TC 69 |
Statistical interpretation of data — Power of tests relating to means and variances
|
90.93 | ISO/TC 69 |
Statistics — Vocabulary and symbols — Part 1: Probability and general statistical terms
|
95.99 | ISO/TC 69 |
Statistics — Vocabulary and symbols — Part 1: General statistical terms and terms used in probability
|
90.60 | ISO/TC 69 |
Statistics — Vocabulary and symbols — Part 2: Statistical quality control
|
95.99 | ISO/TC 69 |
Statistics — Vocabulary and symbols — Part 2: Applied statistics
|
90.20 | ISO/TC 69 |
Statistics — Vocabulary and symbols — Part 3: Design of experiments
|
95.99 | ISO/TC 69 |
Statistics — Vocabulary and symbols — Part 3: Design of experiments
|
95.99 | ISO/TC 69 |
Statistics — Vocabulary and symbols — Part 3: Design of experiments
|
90.93 | ISO/TC 69 |
Statistics — Vocabulary and symbols — Part 4: Survey sampling
|
90.20 | ISO/TC 69 |
Statistics — Vocabulary and symbols
|
95.99 | ISO/TC 69 |
Sampling procedures for inspection by variables — Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
|
95.99 | ISO/TC 69/SC 5 |
Sampling procedures for inspection by variables — Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
|
95.99 | ISO/TC 69/SC 5 |
Sampling procedures for inspection by variables — Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
|
60.60 | ISO/TC 69/SC 5 |
Sampling procedures for inspection by variables — Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics
|
95.99 | ISO/TC 69/SC 5 |
Sampling procedures for inspection by variables — Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics — Amendment 1
|
95.99 | ISO/TC 69/SC 5 |
Sampling procedures for inspection by variables — Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics
|
90.60 | ISO/TC 69/SC 5 |
Sampling procedures for inspection by variables — Part 3: Double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
|
90.93 | ISO/TC 69/SC 5 |
Sampling procedures for inspection by variables — Part 4: Procedures for assessment of declared quality levels
|
90.93 | ISO/TC 69/SC 5 |
Sampling procedures for inspection by variables — Part 5: Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation)
|
90.93 | ISO/TC 69/SC 5 |
Sampling procedures for inspection by variables — Part 6: Specification for single sampling plans for isolated lot inspection indexed by limiting quality (LQ)
|
60.60 | ISO/TC 69/SC 5 |
Sampling procedures and charts for inspection by variables for percent defective
|
95.99 | ISO/TC 69 |
Sampling procedures and charts for inspection by variables for percent nonconforming
|
95.99 | ISO/TC 69/SC 5 |
Statistical interpretation of data — Tests for departure from the normal distribution
|
90.60 | ISO/TC 69 |
Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions
|
95.99 | ISO/TC 69/SC 6 |
Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions — Technical Corrigendum 1
|
95.99 | ISO/TC 69/SC 6 |
Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions
|
60.60 | ISO/TC 69/SC 6 |
Accuracy (trueness and precision) of measurement methods and results — Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
|
95.99 | ISO/TC 69/SC 6 |
Accuracy (trueness and precision) of measurement methods and results — Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method — Technical Corrigendum 1
|
95.99 | ISO/TC 69/SC 6 |
Accuracy (trueness and precision) of measurement methods and results — Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
|
90.92 | ISO/TC 69/SC 6 |
Accuracy (trueness and precision) of measurement methods and results — Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
|
40.00 | ISO/TC 69/SC 6 |
Accuracy (trueness and precision) of measurement methods and results — Part 3: Intermediate measures of the precision of a standard measurement method
|
95.99 | ISO/TC 69/SC 6 |
Accuracy (trueness and precision) of measurement methods and results — Part 3: Intermediate measures of the precision of a standard measurement method — Technical Corrigendum 1
|
95.99 | ISO/TC 69/SC 6 |
Accuracy (trueness and precision) of measurement methods and results — Part 3: Intermediate precision and alternative designs for collaborative studies
|
60.60 | ISO/TC 69/SC 6 |
Accuracy (trueness and precision) of measurement methods and results — Part 4: Basic methods for the determination of the trueness of a standard measurement method
|
95.99 | ISO/TC 69/SC 6 |
Accuracy (trueness and precision) of measurement methods and results — Part 4: Basic methods for the determination of the trueness of a standard measurement method
|
60.60 | ISO/TC 69/SC 6 |
Accuracy (trueness and precision) of measurement methods and results — Part 5: Alternative methods for the determination of the precision of a standard measurement method
|
90.92 | ISO/TC 69/SC 6 |
Accuracy (trueness and precision) of measurement methods and results — Part 5: Alternative methods for the determination of the precision of a standard measurement method — Technical Corrigendum 1
|
60.60 | ISO/TC 69/SC 6 |
Accuracy (trueness and precision) of measurement methods and results — Part 5: Alternative methods for the determination of the precision of a standard measurement method
|
40.00 | ISO/TC 69/SC 6 |
Accuracy (trueness and precision) of measurement methods and results — Part 6: Use in practice of accuracy values
|
90.92 | ISO/TC 69/SC 6 |
Accuracy (trueness and precision) of measurement methods and results — Part 6: Use in practice of accuracy values — Technical Corrigendum 1
|
60.60 | ISO/TC 69/SC 6 |
Precision of test methods — Determination of repeatability and reproducibility by inter-laboratory tests
|
95.99 | ISO/TC 69 |
Precision of test methods — Determination of repeatability and reproducibility for a standard test method by inter-laboratory tests
|
95.99 | ISO/TC 69/SC 6 |
Control charts — Part 1: General guidelines
|
95.99 | ISO/TC 69/SC 4 |
Control charts — Part 1: General guidelines
|
95.99 | ISO/TC 69/SC 4 |
Control charts — Part 1: General guidelines
|
60.60 | ISO/TC 69/SC 4 |
Control charts — Part 2: Shewhart control charts
|
95.99 | ISO/TC 69/SC 4 |
Control charts — Part 2: Shewhart control charts
|
60.60 | ISO/TC 69/SC 4 |
Control charts — Part 3: Acceptance control charts
|
95.99 | ISO/TC 69/SC 4 |
Control charts — Part 3: Acceptance control charts
|
60.60 | ISO/TC 69/SC 4 |
Control charts — Part 4: Cumulative sum charts
|
95.99 | ISO/TC 69/SC 4 |
Control charts — Part 4: Cumulative sum charts
|
60.60 | ISO/TC 69/SC 4 |
Control charts — Part 5: Specialized control charts
|
90.92 | ISO/TC 69/SC 4 |
Control charts — Part 6: EWMA control charts
|
95.99 | ISO/TC 69/SC 4 |
Control charts — Part 6: EWMA control charts for the process mean
|
60.60 | ISO/TC 69/SC 4 |
Control charts — Part 7: Multivariate control charts
|
60.60 | ISO/TC 69/SC 4 |
Control charts — Part 8: Charting techniques for short runs and small mixed batches
|
90.93 | ISO/TC 69/SC 4 |
Control charts — Part 9: Control charts for stationary processes
|
60.60 | ISO/TC 69/SC 4 |
Control charts — General guide and introduction
|
95.99 | ISO/TC 69/SC 4 |
Cumulative sum charts — Guidance on quality control and data analysis using CUSUM techniques
|
95.99 | ISO/TC 69/SC 4 |
Control charts for arithmetic average with warning limits
|
95.99 | ISO/TC 69/SC 4 |
Acceptance control charts
|
95.99 | ISO/TC 69/SC 4 |
Shewhart control charts
|
95.99 | ISO/TC 69/SC 4 |
Shewhart control charts — Technical Corrigendum 1
|
95.99 | ISO/TC 69/SC 4 |
Sequential sampling plans for inspection by attributes
|
95.99 | ISO/TC 69/SC 5 |
Sequential sampling plans for inspection by attributes — Technical Corrigendum 1
|
95.99 | ISO/TC 69/SC 5 |
Sequential sampling plans for inspection by attributes
|
95.99 | ISO/TC 69/SC 5 |
Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation)
|
95.99 | ISO/TC 69/SC 5 |
Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation) — Technical Corrigendum 1
|
95.99 | ISO/TC 69/SC 5 |
Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation)
|
95.99 | ISO/TC 69/SC 5 |
Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots — Part 1: Acceptance sampling
|
90.93 | ISO/TC 69/SC 5 |
Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots — Part 2: Sampling by attributes
|
90.93 | ISO/TC 69/SC 5 |
Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots — Part 3: Sampling by variables
|
90.93 | ISO/TC 69/SC 5 |
Guide for the selection of an acceptance sampling system, scheme or plan for inspection of discrete items in lots
|
95.99 | ISO/TC 69/SC 5 |
Interpretation of statistical data — Estimation of a median
|
95.99 | ISO/TC 69 |
Quality management — Guidance on statistical techniques for ISO 9001:2015
|
60.60 | ISO/TC 176/SC 3 |
Guidance on statistical techniques for ISO 9001:1994
|
95.99 | ISO/TC 176/SC 3 |
Guidance on statistical techniques for ISO 9001:2000
|
95.99 | ISO/TC 176/SC 3 |
Statistical methods — Guidelines for the evaluation of conformity with specified requirements — Part 1: General principles
|
95.99 | ISO/TC 69/SC 6 |
Statistical methods — Guidelines for the evaluation of conformity with specified requirements
|
60.60 | ISO/TC 69/SC 6 |
Acceptance sampling plans and procedures for the inspection of bulk materials
|
90.93 | ISO/TC 69/SC 6 |
Linear calibration using reference materials
|
90.93 | ISO/TC 69/SC 6 |
Statistical interpretation of data — Tests and confidence intervals relating to proportions
|
90.93 | ISO/TC 69 |
Statistical interpretation of data — Tests and confidence intervals relating to proportions — Technical Corrigendum 1
|
60.60 | ISO/TC 69 |
Guidelines for implementation of statistical process control (SPC) — Part 1: Elements of SPC
|
90.92 | ISO/TC 69/SC 4 |
Guidelines for implementation of statistical process control (SPC) — Part 1: Elements of SPC
|
30.60 | ISO/TC 69/SC 4 |
Guidelines for implementation of statistical process control (SPC) — Part 2: Catalogue of tools and techniques
|
90.92 | ISO/TC 69/SC 4 |
Guidelines for implementation of statistical process control (SPC) — Part 3: Reference data sets for SPC software validation
|
60.60 | ISO/TC 69/SC 4 |
Guidelines for implementation of statistical process control (SPC) — Part 4: Reference data sets for measurement process analysis software validation
|
60.60 | ISO/TC 69/SC 4 |
Guidelines for implementation of statistical process control (SPC) — Part 5: Quality data exchange format for SPC software
|
60.60 | ISO/TC 69/SC 4 |
Statistical aspects of sampling from bulk materials — Part 1: General principles
|
90.20 | ISO/TC 69/SC 5 |
Statistical aspects of sampling from bulk materials — Part 2: Sampling of particulate materials
|
90.93 | ISO/TC 69/SC 6 |
Capability of detection — Part 1: Terms and definitions
|
90.93 | ISO/TC 69/SC 6 |
Capability of detection — Part 1: Terms and definitions — Technical Corrigendum 1
|
60.60 | ISO/TC 69/SC 6 |
Capability of detection — Part 2: Methodology in the linear calibration case
|
90.93 | ISO/TC 69/SC 6 |
Capability of detection — Part 2: Methodology in the linear calibration case — Technical Corrigendum 1
|
60.60 | ISO/TC 69/SC 6 |
Capability of detection — Part 3: Methodology for determination of the critical value for the response variable when no calibration data are used
|
90.93 | ISO/TC 69/SC 6 |
Capability of detection — Part 4: Methodology for comparing the minimum detectable value with a given value
|
90.93 | ISO/TC 69/SC 6 |
Capability of detection — Part 5: Methodology in the linear and non-linear calibration cases
|
90.93 | ISO/TC 69/SC 6 |
Capability of detection — Part 5: Methodology in the linear and non-linear calibration cases — Amendment 1
|
60.60 | ISO/TC 69/SC 6 |
Capability of detection — Part 6: Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations
|
95.99 | ISO/TC 69/SC 6 |
Capability of detection — Part 6: Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations
|
90.92 | ISO/TC 69/SC 6 |
Capability of detection — Part 6: Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations
|
30.99 | ISO/TC 69/SC 6 |
Capability of detection — Part 7: Methodology based on stochastic properties of instrumental noise
|
95.99 | ISO/TC 69/SC 6 |
Capability of detection — Part 7: Methodology based on stochastic properties of instrumental noise
|
90.92 | ISO/TC 69/SC 6 |
Capability of detection — Part 7: Methodology based on stochastic properties of instrumental noise
|
40.60 | ISO/TC 69/SC 6 |
Capability of detection — Part 8: Guidance for the implementation of the ISO 11843 series
|
60.60 | ISO/TC 69/SC 6 |
Selected illustrations of fractional factorial screening experiments
|
90.93 | ISO/TC 69/SC 7 |
Selected illustrations of gauge repeatability and reproducibility studies
|
90.93 | ISO/TC 69/SC 7 |
Quantitative methods in process improvement — Six Sigma — Part 1: DMAIC methodology
|
90.93 | ISO/TC 69/SC 7 |
Quantitative methods in process improvement — Six Sigma — Part 2: Tools and techniques
|
90.93 | ISO/TC 69/SC 7 |
Selected illustrations of response surface method — Central composite design
|
90.93 | ISO/TC 69/SC 7 |
Guide for the selection of statistical methods in standardization and specification
|
95.99 | ISO/TC 69 |
Guidelines for the selection of statistical methods in standardization and specification
|
95.99 | ISO/TC 69 |
Guidelines for the selection of statistical methods in standardization and specification
|
95.99 | ISO/TC 69 |
Acceptance sampling procedures based on the allocation of priorities principle (APP) — Part 1: Guidelines for the APP approach
|
95.99 | ISO/TC 69/SC 5 |
Acceptance sampling procedures based on the allocation of priorities principle (APP) — Part 2: Coordinated single sampling plans for acceptance sampling by attributes
|
95.99 | ISO/TC 69/SC 5 |
Guidance on the development and use of ISO statistical publications supported by software
|
60.60 | ISO/TC 69 |
Statistical methods for use in proficiency testing by interlaboratory comparisons
|
95.99 | ISO/TC 69/SC 6 |
Statistical methods for use in proficiency testing by interlaboratory comparison
|
95.99 | ISO/TC 69/SC 6 |
Statistical methods for use in proficiency testing by interlaboratory comparison
|
60.60 | ISO/TC 69/SC 6 |
Statistical methods for use in proficiency testing by interlaboratory comparison — Amendment 1
|
30.99 | ISO/TC 69/SC 6 |
Three statistical approaches for the assessment and interpretation of measurement uncertainty
|
60.60 | ISO/TC 69/SC 6 |
Selected illustrations of attribute agreement analysis
|
90.93 | ISO/TC 69/SC 7 |
Acceptance sampling procedures by attributes — Specified quality levels in nonconforming items per million
|
95.99 | ISO/TC 69/SC 5 |
Statistical interpretation of data — Part 4: Detection and treatment of outliers
|
90.93 | ISO/TC 69 |
Statistical interpretation of data — Part 6: Determination of statistical tolerance intervals
|
95.99 | ISO/TC 69 |
Statistical interpretation of data — Part 6: Determination of statistical tolerance intervals
|
90.20 | ISO/TC 69 |
Statistical interpretation of data — Part 7: Median — Estimation and confidence intervals
|
90.60 | ISO/TC 69 |
Statistical interpretation of data — Part 8: Determination of prediction intervals
|
90.93 | ISO/TC 69 |
Applications of statistical and related methods to new technology and product development process — Robust parameter design (RPD)
|
90.93 | ISO/TC 69/SC 8 |
Application of statistical and related methods to new technology and product development process — Robust tolerance design (RTD)
|
60.60 | ISO/TC 69/SC 8 |
Application of statistical and related methods to new technology and product development process — Part 1: General principles and perspectives of Quality Function Deployment (QFD)
|
95.99 | ISO/TC 69/SC 8 |
Application of statistical and related methods to new technology and product development process — Part 1: General principles and perspectives of quality function deployment (QFD)
|
60.60 | ISO/TC 69/SC 8 |
Applications of statistical and related methods to new technology and product development process — Part 2: Non-quantitative approaches for the acquisition of voice of customer and voice of stakeholder
|
90.93 | ISO/TC 69/SC 8 |
Applications of statistical and related methods to new technology and product development process — Part 3: Quantitative approaches for the acquisition of voice of customer and voice of stakeholder
|
90.92 | ISO/TC 69/SC 8 |
Applications of statistical and related methods to new technology and product development process — Part 3: Quantitative approaches for the acquisition of voice of customer and voice of stakeholder
|
40.00 | ISO/TC 69/SC 8 |
Applications of statistical and related methods to new technology and product development process — Part 4: Analysis of non-quantitative and quantitative Voice of Customer and Voice of Stakeholder
|
90.93 | ISO/TC 69/SC 8 |
Applications of statistical and related methods to new technology and product development process — Part 5: Solution strategy
|
90.93 | ISO/TC 69/SC 8 |
Applications of statistical and related methods to new technology and product development process — Part 6: Guidance for QFD-related approaches to optimization
|
90.93 | ISO/TC 69/SC 8 |
Applications of statistical and related methods to new technology and product development process — Part 7: Guidelines for developing digitalized products and services — General principles and perspectives of the QFD method
|
60.60 | ISO/TC 69/SC 8 |
Applications of statistical and related methods to new technology and product development process — Part 8: Guidelines for commercialization and life cycle
|
60.60 | ISO/TC 69/SC 8 |
Statistical methods for implementation of Six Sigma — Selected illustrations of contingency table analysis
|
60.60 | ISO/TC 69/SC 7 |
Statistical methods — Six Sigma — Basic criteria underlying benchmarking for Six Sigma in organisations
|
90.93 | ISO/TC 69/SC 7 |
Quantitative methods in process improvement — Six Sigma — Competencies for key personnel and their organizations in relation to Six Sigma and Lean implementation
|
90.92 | ISO/TC 69/SC 7 |
Acceptance sampling procedures by attributes — Accept-zero sampling system based on credit principle for controlling outgoing quality
|
95.99 | ISO/TC 69/SC 5 |
Guidance on the application of statistical methods to quality and to industrial standardization
|
60.60 | ISO/TC 69 |
Statistical methods for implementation of Six Sigma — Selected illustrations of distribution identification studies
|
60.60 | ISO/TC 69/SC 7 |
Combined accept-zero sampling systems and process control procedures for product acceptance
|
95.99 | ISO/TC 69/SC 5 |
Statistical methods — Process performance and capability statistics for measured quality characteristics
|
95.99 | ISO/TC 69/SC 4 |
Statistical methods in process management — Capability and performance — Part 1: General principles and concepts
|
95.99 | ISO/TC 69/SC 4 |
Statistical methods in process management — Capability and performance — Part 1: General principles and concepts
|
90.20 | ISO/TC 69/SC 4 |
Statistical methods in process management — Capability and performance — Part 2: Process capability and performance of time-dependent process models
|
95.99 | ISO/TC 69/SC 4 |
Statistical methods in process management — Capability and performance — Part 2: Process capability and performance of time-dependent process models
|
90.92 | ISO/TC 69/SC 4 |
Statistical methods in process management — Capability and performance — Part 2: Process capability and performance of time-dependent process models
|
40.00 | ISO/TC 69/SC 4 |
Statistical methods in process management — Capability and performance — Part 3: Machine performance studies for measured data on discrete parts
|
95.99 | ISO/TC 69/SC 4 |
Statistical methods in process management — Capability and performance — Part 3: Machine performance studies for measured data on discrete parts
|
60.60 | ISO/TC 69/SC 4 |
Statistical methods in process management — Capability and performance — Part 4: Process capability estimates and performance measures
|
90.93 | ISO/TC 69/SC 4 |
Statistical methods in process management — Capability and performance — Part 4: Process capability estimates and performance measures
|
95.99 | ISO/TC 69/SC 4 |
Statistical methods in process management — Capability and performance — Part 5: Process capability estimates and performance for attributive characteristics
|
90.20 | ISO/TC 69/SC 4 |
Statistical methods in process management — Capability and performance — Part 6: Process capability statistics for characteristics following a multivariate normal distribution
|
90.93 | ISO/TC 69/SC 4 |
Statistical methods in process management — Capability and performance — Part 7: Capability of measurement processes
|
95.99 | ISO/TC 69/SC 4 |
Statistical methods in process management — Capability and performance — Part 7: Capability of measurement processes
|
90.92 | ISO/TC 69/SC 4 |
Statistical methods in process management — Capability and performance — Part 7: Capability of measurement processes — Amendment 1
|
60.60 | ISO/TC 69/SC 4 |
Statistical methods in process management — Capability and performance — Part 8: Machine performance of a multi-state production process
|
90.93 | ISO/TC 69/SC 4 |
Statistical methods in process management — Capability and performance — Part 9: Process capability statistics for characteristics defined by geometrical specifications
|
60.60 | ISO/TC 69/SC 4 |
Statistical methods for implementation of Six Sigma — Selected illustration of analysis of variance
|
60.60 | ISO/TC 69/SC 7 |
Accuracy (trueness and precision) of measurement methods and results — Practical guidance for the use of ISO 5725-2:1994 in designing, implementing and statistically analysing interlaboratory repeatability and reproducibility results
|
95.99 | ISO/TC 69/SC 6 |
Experimental designs for evaluation of uncertainty — Use of factorial designs for determining uncertainty functions
|
60.60 | ISO/TC 69/SC 6 |
Random sampling and randomization procedures
|
90.93 | ISO/TC 69/SC 5 |
Statistical analysis for evaluating the precision of binary measurement methods and their results
|
60.60 | ISO/TC 69/SC 6 |
Reproducibility of the level of detection (LOD) of binary methods in collaborative and in-house validation studies
|
60.60 | ISO/TC 69/SC 6 |
Determination and use of straight-line calibration functions
|
30.60 | ISO/TC 69/SC 6 |
Determination and use of straight-line calibration functions
|
90.92 | ISO/TC 69/SC 6 |
Sampling procedures for inspection by attributes — Introduction to the ISO 2859 series of standards for sampling for inspection by attributes
|
90.93 | ISO/TC 69/SC 5 |
Sequential sampling plans for inspection by attributes
|
90.93 | ISO/TC 69/SC 5 |
Double sampling plans by attributes with minimal sample sizes, indexed by producer's risk quality (PRQ) and consumer's risk quality (CRQ)
|
90.93 | ISO/TC 69/SC 5 |
Acceptance sampling procedures by attributes — Accept-zero sampling system based on credit principle for controlling outgoing quality
|
90.93 | ISO/TC 69/SC 5 |
Combined accept-zero sampling systems and process control procedures for product acceptance
|
90.93 | ISO/TC 69/SC 5 |
Sampling procedures for inspection by attributes — Two-stage sampling plans for auditing and for inspection under prior information
|
60.60 | ISO/TC 69/SC 5 |
Acceptance sampling procedures by attributes — Specified quality levels in nonconforming items per million
|
90.93 | ISO/TC 69/SC 5 |
Acceptance sampling procedures based on the allocation of priorities principle (APP) — Part 1: Guidelines for the APP approach
|
90.93 | ISO/TC 69/SC 5 |
Acceptance sampling procedures based on the allocation of priorities principle (APP) — Part 2: Coordinated single sampling plans for acceptance sampling by attributes
|
90.93 | ISO/TC 69/SC 5 |
Random variate generation methods
|
90.93 | ISO/TC 69 |
Double sampling plans by attributes with minimal sample sizes, indexed by producer's risk quality (PRQ) and consumer's risk quality (CRQ)
|
95.99 | ISO/TC 69/SC 5 |
Selected illustrations of full factorial experiments with four factors
|
90.93 | ISO/TC 69/SC 7 |
Selected illustrations of full factorial experiments with four factors — Technical Corrigendum 1
|
60.60 | ISO/TC 69/SC 7 |
Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation)
|
90.60 | ISO/TC 69/SC 5 |
No matching records found. Please try changing the filter settings.