Filter :
Standard and/or project | Stage | TC |
---|---|---|
Grey iron pipes, special castings and grey iron parts for pressure main lines
|
95.99 | ISO/TC 5/SC 2 |
Metal pipes — Steel sockets screwed according to ISO 7
|
95.99 | ISO/TC 5 |
Withdrawal of ISO 64-1974
|
95.99 | ISO/TC 5 |
Carbon steel tubes suitable for screwing in accordance with ISO 7-1
|
95.99 | ISO/TC 5/SC 1 |
Withdrawal of ISO 134-1973
|
95.99 | ISO/TC 5 |
Flanging test on steel tubes
|
95.99 | ISO/TC 164/SC 2 |
Drift expanding test on steel tubes
|
95.99 | ISO/TC 164/SC 2 |
Bend test on steel tubes
|
95.99 | ISO/TC 164/SC 2 |
Flattening test on steel tubes
|
95.99 | ISO/TC 164/SC 2 |
Steel tubes — Wall thicknesses
|
95.99 | ISO/TC 5 |
Withdrawal of ISO/R 285-1962
|
95.99 | ISO/TC 5 |
Withdrawal of ISO 336-1976
|
95.99 | ISO/TC 5 |
Ring expanding test on steel tubes
|
95.99 | ISO/TC 164/SC 2 |
Steel — Tensile testing of tubes
|
95.99 | ISO/TC 164/SC 1 |
Withdrawal of ISO/R 531-1966
|
95.99 | ISO/TC 5 |
Withdrawal of ISO 560-1975
|
95.99 | ISO/TC 5 |
Stainless steel tubes — Dimensions, tolerances and conventional masses per unit length
|
95.99 | ISO/TC 5/SC 1 |
Stainless steel tubes — Dimensions, tolerances and conventional masses per unit length
|
90.93 | ISO/TC 5/SC 1 |
Withdrawal of ISO/R 1128-1969
|
95.99 | ISO/TC 5 |
Metallic materials — Hardness test — Calibration of standardized blocks to be used for Rockwell superficial hardness testing machines (scales 15N, 30N, 45N, 15T, 30T and 45T)
|
95.99 | ISO/TC 164/SC 3 |
Ductile iron pipes, fittings and accessories for pressure pipe-lines
|
95.99 | ISO/TC 5 |
Ductile iron pipes, fittings and accessories for pressure pipe-lines — Addendum 1
|
95.99 | ISO/TC 5 |
Ductile iron pipes, fittings and accessories for pressure pipelines
|
95.99 | ISO/TC 5/SC 2 |
Ductile iron pipes, fittings and accessories for pressure pipelines
|
95.99 | ISO/TC 5/SC 2 |
Seamless plain end tubes made from unalloyed steel and without quality requirements
|
95.99 | ISO/TC 5 |
Welded plain end tubes made from unalloyed steel and without quality requirements
|
95.99 | ISO/TC 5 |
Steel products for pressure purposes — Quality requirements — Part 2: Wrought seamless tubes
|
95.99 | ISO/TC 17/SC 19 |
Steel products for pressure purposes — Quality requirements — Part 3: Electric resistance and induction-welded tubes
|
95.99 | ISO/TC 17/SC 19 |
Steel products for pressure purposes — Quality requirements — Part 4: Plates
|
95.99 | ISO/TC 17/SC 10 |
Steel products for pressure purposes — Quality requirements — Part 5: Longitudinally welded austenitic stainless steel tubes
|
95.99 | ISO/TC 17/SC 19 |
Steel products for pressure purposes — Quality requirements — Part 6: Submerged arc longitudinally or spirally welded steel tubes
|
95.99 | ISO/TC 17/SC 19 |
Steel products for pressure purposes — Quality requirements — Part 7: Carbon steel plate (thicknesses over 100 to 250 mm)
|
95.99 | ISO/TC 17/SC 10 |
Steel products for pressure purposes — Quality requirements — Part 8: Plates of weldable fine grain steels with high proof stress supplied in the normalized or quenched and tempered condition (thicknesses from 3 to 70 mm)
|
95.99 | ISO/TC 17/SC 10 |
Plain end seamless precision steel tubes — Technical conditions for delivery
|
95.99 | ISO/TC 5 |
Plain end seamless precision steel tubes — Technical conditions for delivery
|
95.99 | ISO/TC 5/SC 1 |
Plain end welded precision steel tubes — Technical conditions for delivery
|
95.99 | ISO/TC 5 |
Plain end welded precision steel tubes — Technical conditions for delivery
|
90.60 | ISO/TC 5/SC 1 |
Plain end as-welded and sized precision steel tubes — Technical conditions for delivery
|
95.99 | ISO/TC 5 |
Plain end as-welded and sized precision steel tubes — Technical conditions for delivery
|
90.60 | ISO/TC 5/SC 1 |
Withdrawal of ISO/TR 3311-1975
|
95.99 | ISO/TC 5 |
Withdrawal of ISO 3418-1975
|
95.99 | ISO/TC 5 |
Steel tubes and fittings — Symbols for use in specifications — Part 1: Tubes and tubular accessories with circular cross-section
|
90.93 | ISO/TC 5/SC 1 |
Steel tubes and fittings — Symbols for use in specifications — Part 2: Square and rectangular hollow sections
|
90.93 | ISO/TC 5/SC 1 |
Steel tubes and tubular shaped accessories with circular cross-section — Symbols to be used in specifications
|
95.99 | ISO/TC 5/SC 1 |
Ductile iron pipes for pressure pipelines — Centrifugal cement mortar lining — General requirements
|
95.99 | ISO/TC 5 |
Ductile iron pipes for pressure and non-pressure pipelines — Centrifugal cement mortar lining — General requirements
|
95.99 | ISO/TC 5/SC 2 |
Ductile iron pipes and fittings for pressure and non-pressure pipelines — Cement mortar lining
|
95.99 | ISO/TC 5/SC 2 |
Ductile iron pipes and fittings for pressure and non-pressure pipelines — Cement mortar lining
|
60.60 | ISO/TC 5/SC 2 |
Plain end steel tubes, welded and seamless — General tables of dimensions and masses per unit length
|
95.99 | ISO/TC 5/SC 1 |
Plain end steel tubes, welded and seamless — General tables of dimensions and masses per unit length
|
90.60 | ISO/TC 5/SC 1 |
Water aggressiveness evaluation and optimized lining choice
|
60.60 | ISO/TC 5/SC 2 |
Environmental life cycle assessment and recycling of ductile iron pipes for water applications
|
60.60 | ISO/TC 5/SC 2 |
Steel tubes — Tolerance systems
|
95.99 | ISO/TC 5 |
Steel tubes — Tolerance systems
|
90.60 | ISO/TC 5/SC 1 |
Steel pipes and fittings for buried or submerged pipe lines — External and internal coating by bitumen or coal tar derived materials
|
95.99 | ISO/TC 5/SC 1 |
Steel tubes — Preparation of ends of tubes and fittings for welding
|
95.99 | ISO/TC 5/SC 1 |
Design and asset management of DIP for water application — Part 2: Design, installation and operation
|
60.60 | ISO/TC 5/SC 2 |
Stainless steel tubes suitable for screwing in accordance with ISO 7/1
|
95.99 | ISO/TC 5/SC 1 |
Stainless steel tubes suitable for screwing in accordance with ISO 7/1 — Amendment 1
|
95.99 | ISO/TC 5/SC 1 |
Stainless steel tubes suitable for screwing in accordance with ISO 7-1
|
95.99 | ISO/TC 5/SC 1 |
Ductile iron pipes — External zinc coating — Part 1: Metallic zinc with finishing layer
|
95.99 | ISO/TC 5/SC 2 |
Ductile iron pipes — External zinc-based coating — Part 1: Metallic zinc with finishing layer
|
95.99 | ISO/TC 5/SC 2 |
Ductile iron pipes, fittings, accessories and their joints — External zinc-based coating — Part 1: Metallic zinc with finishing layer
|
90.93 | ISO/TC 5/SC 2 |
Ductile iron pipes — External zinc coating — Part 2: Zinc rich paint with finishing layer
|
95.99 | ISO/TC 5/SC 2 |
Ductile iron pipes, fittings, accessories and their joints — External zinc-based coating — Part 2: Zinc-rich paint
|
90.93 | ISO/TC 5/SC 2 |
Ductile iron pipes — External zinc coating
|
95.99 | ISO/TC 5/SC 2 |
Ductile iron pipes — Polyethylene sleeving
|
95.99 | ISO/TC 5/SC 2 |
Ductile iron pipelines — Polyethylene sleeving for site application
|
95.99 | ISO/TC 5/SC 2 |
Ductile iron pipelines — Polyethylene sleeving for site application
|
60.60 | ISO/TC 5/SC 2 |
Steel tubes — Continuous character marking and colour coding for material identification
|
95.99 | ISO/TC 5/SC 1 |
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes — Electromagnetic testing for verification of hydraulic leak-tightness
|
95.99 | ISO/TC 17/SC 19 |
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes — Electromagnetic testing for verification of hydraulic leak-tightness
|
95.99 | ISO/TC 17/SC 19 |
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes — Full peripheral ultrasonic testing for the detection of longitudinal imperfections
|
95.99 | ISO/TC 17/SC 19 |
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes — Eddy current testing for the detection of imperfections
|
95.99 | ISO/TC 17/SC 19 |
Seamless steel tubes for pressure purposes — Full peripheral ultrasonic testing for the detection of transverse imperfections
|
95.99 | ISO/TC 17/SC 19 |
Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 1: Unalloyed steels with specified room temperature properties
|
90.60 | ISO/TC 17/SC 19 |
Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 2: Unalloyed and alloyed steels with specified elevated temperature properties
|
90.60 | ISO/TC 17/SC 19 |
Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 3: Unalloyed and alloyed steels with specified low temperature properties
|
90.60 | ISO/TC 17/SC 19 |
Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 4: Austenitic stainless steels
|
90.60 | ISO/TC 17/SC 19 |
Welded steel tubes for pressure purposes — Technical delivery conditions — Part 1: Unalloyed steel tubes with specified room temperature properties
|
90.60 | ISO/TC 17/SC 19 |
Welded steel tubes for pressure purposes — Technical delivery conditions — Part 2: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified elevated temperature properties
|
90.60 | ISO/TC 17/SC 19 |
Welded steel tubes for pressure purposes — Technical delivery conditions — Part 3: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified low temperature properties
|
90.60 | ISO/TC 17/SC 19 |
Welded steel tubes for pressure purposes — Technical delivery conditions — Part 4: Submerged arc-welded unalloyed and alloyed steel tubes with specified elevated temperature properties
|
90.60 | ISO/TC 17/SC 19 |
Welded steel tubes for pressure purposes — Technical delivery conditions — Part 5: Submerged arc-welded unalloyed and alloyed steel tubes with specified low temperature properties
|
90.60 | ISO/TC 17/SC 19 |
Welded steel tubes for pressure purposes — Technical delivery conditions — Part 6: Longitudinally welded austenitic stainless steel tubes
|
90.60 | ISO/TC 17/SC 19 |
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes — Full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of longitudinal imperfections
|
95.99 | ISO/TC 17/SC 19 |
Seamless steel tubes for pressure purposes — Full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of transverse imperfections
|
95.99 | ISO/TC 17/SC 19 |
Electric resistance and induction welded steel tubes for pressure purposes — Ultrasonic testing of the weld seam for the detection of longitudinal imperfections
|
95.99 | ISO/TC 17/SC 19 |
Submerged arc-welded steel tubes for pressure purposes — Ultrasonic testing of the weld seam for the detection of longitudinal and/or transverse imperfections
|
95.99 | ISO/TC 17/SC 19 |
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes — Ultrasonic testing for the detection of laminar imperfections
|
95.99 | ISO/TC 17/SC 19 |
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes — Ultrasonic testing for the verification of hydraulic leak-tightness
|
95.99 | ISO/TC 17/SC 19 |
Non-destructive testing of steel tubes — Automated ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for verification of hydraulic leak-tightness
|
90.60 | ISO/TC 17/SC 19 |
Seamless and hot-stretch-reduced welded steel tubes for pressure purposes — Full peripheral ultrasonic thickness testing
|
95.99 | ISO/TC 17/SC 19 |
Design method for ductile iron pipes
|
95.99 | ISO/TC 5/SC 2 |
Design method for ductile iron pipes
|
90.92 | ISO/TC 5/SC 2 |
Design method for ductile iron pipes
|
60.00 | ISO/TC 5/SC 2 |
Non-destructive testing of steel tubes — Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness
|
90.60 | ISO/TC 17/SC 19 |
Non-destructive testing of steel tubes — Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness — Amendment 1: Change of dimensions of the reference notch; change acceptance criteria
|
60.60 | ISO/TC 17/SC 19 |
Non-destructive testing of steel tubes — Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections
|
90.60 | ISO/TC 17/SC 19 |
Non-destructive testing of steel tubes — Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections — Amendment 1: Change of dimensions of the reference notch; change acceptance criteria
|
60.60 | ISO/TC 17/SC 19 |
Non-destructive testing of steel tubes — Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections
|
90.60 | ISO/TC 17/SC 19 |
Non-destructive testing of steel tubes — Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections — Amendment 1: Change of dimensions of the reference notch
|
60.60 | ISO/TC 17/SC 19 |
Non-destructive testing of steel tubes — Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections — Amendment 2: Change acceptance criteria
|
60.60 | ISO/TC 17/SC 19 |
Non-destructive testing of steel tubes — Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections
|
90.60 | ISO/TC 17/SC 19 |
Non-destructive testing of steel tubes — Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections
|
90.60 | ISO/TC 17/SC 19 |
Non-destructive testing of steel tubes — Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections
|
95.99 | ISO/TC 17/SC 19 |
Non-destructive testing of steel tubes — Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections
|
90.60 | ISO/TC 17/SC 19 |
Non-destructive testing of steel tubes — Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections
|
95.99 | ISO/TC 17/SC 19 |
Non-destructive testing of steel tubes — Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections
|
90.60 | ISO/TC 17/SC 19 |
Non-destructive testing of steel tubes — Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections
|
90.60 | ISO/TC 17/SC 19 |
Non-destructive testing of steel tubes — Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections — Amendment 1: Change acceptance criteria
|
60.60 | ISO/TC 17/SC 19 |
Non-destructive testing of steel tubes — Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes
|
90.60 | ISO/TC 17/SC 19 |
Non-destructive testing of steel tubes — Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes — Amendment 1: Change acceptance criteria
|
60.60 | ISO/TC 17/SC 19 |
Non-destructive testing of steel tubes — Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections
|
90.60 | ISO/TC 17/SC 19 |
Non-destructive testing of steel tubes — Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections — Amendment 1: Change of ultrasonic test frequency; change of acceptance criteria
|
60.60 | ISO/TC 17/SC 19 |
Non-destructive testing of steel tubes — Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections
|
90.60 | ISO/TC 17/SC 19 |
Non-destructive testing of steel tubes — Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections — Amendment 1: Change of ultrasonic test frequency; change of acceptance criteria
|
60.60 | ISO/TC 17/SC 19 |
Non-destructive testing of steel tubes — Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes
|
90.60 | ISO/TC 17/SC 19 |
Non-destructive testing of steel tubes — Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes — Amendment 1: Change of acceptance criteria
|
60.60 | ISO/TC 17/SC 19 |
Steel tubes for pressure purposes — Qualification and certification of non-destructive testing (NDT) personnel
|
95.99 | ISO/TC 17/SC 19 |
Seamless and welded steel tubes for pressure purposes — Ultrasonic testing of tube ends for the detection of laminar imperfections
|
95.99 | ISO/TC 17/SC 19 |
Welded steel tubes for pressure purposes — Ultrasonic testing for the detection of laminar imperfections in strips/plates used in the manufacture of welded tubes
|
95.99 | ISO/TC 17/SC 19 |
Seamless and welded steel tubes for pressure purposes — Liquid penetrant testing
|
95.99 | ISO/TC 17/SC 19 |
Submerged arc-welded steel tubes for pressure purposes — Radiographic testing of the weld seam for the detection of imperfections
|
95.99 | ISO/TC 17/SC 19 |
Trenchless applications of ductile iron pipes systems — Product design and installation
|
90.92 | ISO/TC 5/SC 2 |
Welded steel tubes for pressure purposes — Ultrasonic testing of the area adjacent to the weld seam for the detection of laminar imperfections
|
95.99 | ISO/TC 17/SC 19 |
Seamless and welded steel tubes for pressure purposes — Magnetic particle inspection of the tube ends for the detection of laminar imperfections
|
95.99 | ISO/TC 17/SC 19 |
Seamless and welded steel tubes for pressure purposes — Magnetic particle inspection of the tube body for the detection of surface imperfections
|
95.99 | ISO/TC 17/SC 19 |
Ductile iron pipes and fittings — Seal coats for cement mortar linings
|
95.99 | ISO/TC 5/SC 2 |
Ductile iron pipes and fittings — Seal coats for cement mortar linings
|
95.99 | ISO/TC 5/SC 2 |
Ductile iron pipes and fittings — Seal coats for cement mortar linings
|
60.60 | ISO/TC 5/SC 2 |
Earthquake- and subsidence-resistant design of ductile iron pipelines
|
95.99 | ISO/TC 5/SC 2 |
Earthquake-resistant and subsidence-resistant design of ductile iron pipelines
|
60.60 | ISO/TC 5/SC 2 |
Ductile iron fittings, accessories and their joints and valves — Epoxy coating
|
90.93 | ISO/TC 5/SC 2 |
Construction and installation of ductile iron pipeline system
|
60.60 | ISO/TC 5/SC 2 |
Restrained joint systems for ductile iron pipelines — Calculation rules for lengths to be restrained
|
60.60 | ISO/TC 5/SC 2 |
Irrigation applications of ductile iron pipelines — Product design and installation
|
60.60 | ISO/TC 5/SC 2 |
Internal protection by polymeric lining for ductile iron pipes — Requirements and test methods — Part 1: Polyurethane lining
|
60.60 | ISO/TC 5/SC 2 |
Internal protection by polymeric lining for ductile iron pipes — Requirements and test methods — Part 2: Epoxy lining
|
60.60 | ISO/TC 5/SC 2 |
No matching records found. Please try changing the filter settings.