Filter :
Standard and/or project under the direct responsibility of ISO/TC 22/SC 34 Secretariat Stage ICS
Road vehicles — Engine test code — Net power
95.99
Road vehicles — Engine test code — Net power
60.60
Road vehicles — Engine test code — Gross power
95.99
Road vehicles — Engine test code — Gross power
60.60
Diesel engines — Fuel nozzles — Size "S"
90.93
Diesel engines — Clamp-mounted fuel injectors, types 7 and 28
95.99
Diesel engines — Clamp-mounted fuel injectors, types 7 and 28
90.93
Diesel engines — Flange-mounted fuel injectors, size "S" — Types 2, 3, 4, 5 and 6
90.93
Diesel engines — 60 degree female cones for high-pressure fuel injection components
95.99
Diesel engines — 60° female cones for high-pressure fuel injection components
95.99
Diesel engines — 60° female cones for high-pressure fuel injection components
60.60
Road vehicles — Injection nozzle holder with body, types 8 and 10, and injection nozzle holder with fixing flats, types 9 and 11
90.93
Road vehicles — Measurement methods for exhaust gas emissions during inspection or maintenance
90.93
Instruments for measuring vehicle exhaust emissions — Metrological and technical requirements; Metrological control and performance tests
95.99
Road vehicles — Fuel injection pump testing — Part 1: Dynamic conditions
90.93
Road vehicles — Fuel injection pump testing — Part 2: Static conditions
90.93
Road vehicles — Fuel injection pump testing — Part 3: Application and test procedures
90.93
Road vehicles — Fuel injection pump testing — Part 3: Application and test procedures — Amendment 1
60.60
Diesel engines — Calibrating nozzle, delay pintle type
90.93
Road vehicles — Fuel filters for diesel engines — Test methods
90.92
Road vehicles — Fuel filters for diesel engines — Test methods
20.00
Diesel engines — Fuel injection pumps — High-pressure pipes for testing
90.93
Road vehicles — Calibration fluids for diesel injection equipment
90.93
Inlet air cleaning equipment for internal combustion engines and compressors — Performance testing
95.99
Inlet air cleaning equipment for internal combustion engines and compressors — Performance testing — Amendment 1
95.99
Inlet air cleaning equipment for internal combustion engines and compressors — Performance testing
60.60
Road vehicles — Analysis of technical changes of ISO 5011:2020
30.99
Diesel engines — Fuel injection pumps — Tapers for shaft ends and hubs
95.99
Diesel engines — Fuel injection pumps — Tapers for shaft ends and hubs
90.92
Diesel engines — Fuel injection pumps — Tapers for shaft ends and hubs
40.20
Internal combustion engines — Piston rings — Part 1: Vocabulary
95.99
Internal combustion engines — Piston rings — Part 1: Vocabulary
60.60
Internal combustion engines — Piston rings — Part 2: Inspection measuring principles
95.99
Internal combustion engines — Piston rings — Part 2: Inspection measuring principles
60.60
Internal combustion engines — Piston rings — Part 3: Material specifications
95.99
Internal combustion engines — Piston rings — Part 3: Material specifications
60.60
Internal combustion engines — Piston rings — Part 4: General specifications
90.92
Internal combustion engines — Piston rings — Part 4: General specifications
40.60
Internal combustion engines — Piston rings — Part 5: Quality requirements
95.99
Internal combustion engines — Piston rings — Part 5: Quality requirements
60.60
Internal combustion engines — Piston rings — Part 1: Rectangular rings made of cast iron
95.99
Internal combustion engines — Piston rings — Part 1: Rectangular rings made of cast iron
60.60
Internal combustion engines — Piston rings — Part 2: Rectangular rings made of steel
90.92
Internal combustion engines — Piston rings — Part 2: Rectangular rings made of steel
30.60
Internal combustion engines — Piston rings — Scraper rings made of cast iron
90.93
Internal combustion engines — Piston rings — Part 1: Keystone rings made of cast iron
95.99
Internal combustion engines — Piston rings — Part 1: Keystone rings made of cast iron
90.60
Internal combustion engines — Piston rings — Part 2: Half keystone rings made of cast iron
95.99
Internal combustion engines — Piston rings — Part 2: Half keystone rings made of cast iron
90.92
Internal combustion engines — Piston rings — Part 2: Half keystone rings made of cast iron
20.00
Internal combustion engines — Piston rings — Part 3: Keystone rings made of steel
95.99
Internal combustion engines — Piston rings — Part 3: Keystone rings made of steel
90.60
Internal combustion engines — Piston rings — Part 4: Half keystone rings made of steel
95.99
Internal combustion engines — Piston rings — Part 4: Half keystone rings made of steel
90.92
Internal combustion engines — Piston rings — Part 4: Half keystone rings made of steel
20.00
Internal combustion engines — Piston rings — Oil control rings
90.93
Internal combustion engines — Piston rings — Part 1: Coil spring loaded oil control rings made of cast iron
40.60
Internal combustion engines — Piston rings — Part 2: Coil-spring-loaded oil control rings of narrow width made of cast iron
90.92
Internal combustion engines — Piston rings — Part 2: Coil-spring-loaded oil control rings of narrow width made of cast iron
40.60
Internal combustion engines — Piston rings — Part 3: Coil-spring-loaded oil control rings made of steel
95.99
Internal combustion engines — Piston rings — Part 3: Coil-spring-loaded oil control rings made of steel
60.60
Internal combustion engines — Piston rings — Coil-spring-loaded oil control rings
90.92
Internal combustion engines — Piston rings — Expander/segment oil-control rings
95.99
Internal combustion engines — Piston rings — Expander/rail oil-control rings
60.60
Diesel engines — Screw-in injection nozzle holders, types 20, 21, 21.1 and 27 for pintle nozzle size "S", type "B"
90.93
Road vehicles — Screw-mounted injection nozzle holders, types 12, 13, 14, 15, 16, 17, 18 and 19
90.93
Diesel engines — End-mounting flanges for pumps — Part 1: Fuel injection pumps
90.93
Diesel engines — End-mounting flanges for pumps — Part 2: High-pressure supply pumps for common rail fuel injection systems
95.99
Diesel engines — End-mounting flanges for pumps — Part 2: High-pressure supply pumps for common rail fuel injection systems
60.60
Diesel engines — Heads for spin-on fuel filters with horizontal flange — Mounting and connecting dimensions
90.93
Diesel engines — Heads for fuel filters with vertical flange — Mounting and connecting dimensions
90.93
Road vehicles — Fuel injection equipment testing — Part 1: Calibrating nozzle and holder assemblies
90.93
Road vehicles — Fuel injection equipment testing — Part 2: Orifice plate flow-measurement
90.93
Road vehicles — Two-stage fuel filters for compression-ignition engines — Mounting and connecting dimensions
95.99
Diesel engines — Base-mounted in-line fuel injection pumps and high-pressure supply pumps for common rail fuel injection systems — Mounting dimensions
95.99
Diesel engines — Base-mounted in-line fuel injection pumps and high-pressure supply pumps for common rail fuel injection systems — Mounting dimensions
60.60
Road vehicles — Spin-on fuel filters for diesel engines — Mounting and connecting dimensions
90.93
Commercial vehicles — Dimensions of air filter elements — Part 1: Types A and B
95.99
Road vehicles — Air filter elements for commercial vehicles — Dimensions — Part 2: Types C and D
95.99
Fuel injection equipment — Vocabulary — Part 1: Fuel injection pumps
90.93
Fuel injection equipment — Vocabulary — Part 1: Fuel injection pumps — Amendment 1
60.60
Fuel injection equipment — Vocabulary — Part 2: Fuel injectors
90.93
Fuel injection equipment — Vocabulary — Part 2: Fuel injectors — Amendment 1
60.60
Fuel injection equipment — Vocabulary — Part 3: Unit injectors
90.93
Fuel injection equipment — Vocabulary — Part 4: High-pressure pipes and end-connections
90.93
Fuel injection equipment — Vocabulary — Part 5: Common rail fuel injection system
95.99
Fuel injection equipment — Vocabulary — Part 5: Common rail fuel injection system
60.60
Diesel engines — Cradle-mounted in-line fuel injection pumps — Mounting dimensions
90.93
Road vehicles — Diesel engines — Screw-in injector, type 22
90.93
Diesel engines — Steel tubes for high-pressure fuel injection pipes — Part 1: Requirements for seamless cold-drawn single-wall tubes
95.99
Diesel engines — Steel tubes for high-pressure fuel injection pipes — Part 1: Requirements for seamless cold-drawn single-wall tubes
90.93
Compression-ignition engines — Steel tubes for high-pressure fuel injection pipes — Part 2: Requirements for composite tubes
90.93
Diesel engines — Testing of fuel injectors — Part 1: Hand-lever-operated testing and setting apparatus
90.93
Diesel engines — Testing of fuel injectors — Part 2: Test methods
90.93
Diesel engines — Screw-in injection nozzle holders, types 24, 25, 26 and 26.1
90.93
Road vehicles — Compression-ignition engines — Screw-in injection nozzle holder, type 23
90.93
Road vehicles — Nozzle spouts for unleaded gasoline
90.93
Road vehicles — Nozzle spouts for leaded gasoline and diesel fuel
90.93
Road vehicles — Smoke measurement of compression-ignition (diesel) engines — Survey of short in-service tests
95.99
Passenger cars — Engine cooling systems — Dimensions of pressure caps and their ramp seats on filler necks
90.93
Passenger cars — Engine cooling systems — Test methods and marking of pressure caps
90.93
Road vehicles — Road load — Part 1: Determination under reference atmospheric conditions
90.93
Road vehicles — Road load — Part 2: Reproduction on chassis dynamometer
90.93
Road vehicles — Air filters for passenger compartments — Part 1: Test for particulate filtration
90.93
Road vehicles — Air filters for passenger compartments — Part 2: Test for gaseous filtration
90.93
Road vehicles and internal combustion engines — Filter vocabulary — Part 1: Definitions of filters and filter components
90.93
Road vehicles and internal combustion engines — Filter vocabulary — Part 2: Definitions of characteristics of filters and their components
90.93
Road vehicles — Test dust for filter evaluation — Part 1: Arizona test dust
95.99
Road vehicles — Test contaminants for filter evaluation — Part 1: Arizona test dust
90.93
Road vehicles — Test dust for filter evaluation — Part 2: Aluminium oxide test dust
90.93
Road vehicles — Test contaminants for filter evaluation — Part 3: Soot contaminant
90.92
Road vehicles — Test contaminants for filter evaluation — Part 3: Soot contaminant
50.20
Diesel fuel — Assessment of lubricity using the high-frequency reciprocating rig (HFRR) — Part 1: Test method
95.99
Diesel fuel — Assessment of lubricity using the high-frequency reciprocating rig (HFRR) — Part 1: Test method
95.99
Diesel fuel — Assessment of lubricity using the high-frequency reciprocating rig (HFRR) — Part 2: Limit
95.99
Diesel fuel — Assessment of lubricity using the high-frequency reciprocating rig (HFRR) — Part 2: Limit
90.20
Diesel engines — Clamp mounted CR fuel injectors — Mounting dimensions
95.99
Diesel engines — Clamp mounted CR fuel injectors — Mounting dimensions
60.60
Diesel engines — Cleanliness assessment of fuel injection equipment
95.99
Diesel engines — Cleanliness assessment of fuel injection equipment
60.60
Road vehicles — Refrigerant systems used in mobile air conditioning systems (MAC) — Safety requirements
90.93
Diesel engines — High-pressure fuel injection pipe assemblies — General requirements and dimensions
95.99
Diesel engines — High-pressure fuel injection pipe assemblies — General requirements and dimensions
90.93
Road vehicles — Filler pipes and openings of motor vehicle fuel tanks — Vapour recovery system
90.93
Road vehicles — Localization of exhaust system leaks and equipment specifications
90.93
Diesel engines — Fuel injection pumps and fuel injector low-pressure connections — Part 1: Threaded connections
95.99
Diesel engines — Fuel injection pumps and fuel injector low-pressure connections — Part 1: Threaded connections
90.93
Diesel engines — Fuel injection pumps and fuel injector low-pressure connections — Part 2: Non-threaded (push-on) connections
95.99
Diesel engines — Fuel injection pumps and fuel injector low-pressure connections — Part 2: Non-threaded (push-on) connections
90.93
Diesel engines — Fuel injection pump testing — Calibrating fuel injectors
90.93
Heavy duty engines — Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions
90.60
Road vehicles — Engine families for certification of heavy-duty vehicles by Exhaust emission
90.93
Road vehicles — Cleanliness of components of fluid circuits — Part 1: Vocabulary
95.99
Road vehicles — Cleanliness of components of fluid circuits — Part 2: Method of extraction of contaminants by agitation
95.99
Road vehicles — Cleanliness of components of fluid circuits — Part 3: Method of extraction of contaminants by pressure rinsing
95.99
Road vehicles — Cleanliness of components of fluid circuits — Part 4: Method of extraction of contaminants by ultrasonic techniques
95.99
Road vehicles — Cleanliness of components of fluid circuits — Part 5: Method of extraction of contaminants on functional test bench
95.99
Road vehicles — Cleanliness of components of fluid circuits — Part 6: Particle mass determination by gravimetric analysis
95.99
Road vehicles — Cleanliness of components of fluid circuits — Part 7: Particle sizing and counting by microscopic analysis
95.99
Road vehicles — Cleanliness of components of fluid circuits — Part 8: Particle nature determination by microscopic analysis
95.99
Road vehicles — Cleanliness of components of fluid circuits — Part 9: Particle sizing and counting by automatic light extinction particle counter
95.99
Road vehicles — Cleanliness of components of fluid circuits — Part 10: Expression of results
95.99
Road vehicles — Cleanliness of components and systems
60.60
Road vehicles — Detection of exhaust system leaks — Helium test method and detection device specification
90.93
Diesel engines — Fuel filters — Method for evaluating fuel/water separation efficiency
60.60
Diesel engines — Fuel filters — Method for evaluating fuel/water separation efficiency
95.99
Road vehicles — Aerosol separator performance test for internal combustion engines — Part 1: General
90.92
Road vehicles — Aerosol separator performance test for internal combustion engines — Part 1: General — Amendment 1
60.60
Road vehicles — Aerosol separator performance test for internal combustion engines — Part 1: General
30.99
Road vehicles — Aerosol separator performance test for internal combustion engines — Part 2: Laboratory test method
90.93
Road vehicles — Aerosol separator performance test for internal combustion engines — Part 3: Method to perform engine gravimetric test
90.92
Road vehicles — Aerosol separator performance test for internal combustion engines — Part 3: Method to perform engine gravimetric test
20.00
Road Vehicles — Aerosol separator performance test for internal combustion engines — Part 4: Laboratory fractional efficiency test method
60.60
Road Vehicles — Aerosol separator performance test for internal combustion engines — Part 5: Engine fractional efficiency test method and upstream distribution sampling method
90.93
Gasoline engines — Medium pressure liquid fuel supply connections — Part 1: 60° female cone connectors
95.99
Gasoline engines — Medium pressure liquid fuel supply connections — Part 1: 60° female cone connectors
90.93
Gasoline engines — Medium pressure liquid fuel supply connections — Part 2: Pipe assemblies
90.92
Gasoline engines — High pressure liquid fuel supply connections — Part 2: Pipe assemblies
50.20
Internal combustion engines — Piston pins — Part 1: General specifications
95.99
Internal combustion engines — Piston pins — Part 1: General specifications
60.60
Internal combustion engines — Piston pins — Part 2: Inspection measuring principles
95.99
Internal combustion engines — Piston pins — Part 2: Inspection measuring principles
90.92
Internal combustion engines — Piston pins — Part 2: Inspection measuring principles
40.60
Diesel fuel and petrol filters for internal combustion engines — Filtration efficiency using particle counting and contaminant retention capacity
90.92
Diesel fuel and petrol filters for internal combustion engines — Filtration efficiency using particle counting and contaminant retention capacity
50.00
Road vehicles — Diesel engine fuel filters — Single pass method of evaluating filtration performance of a fuel filter under cyclic flow conditions in combination with mechanical vibration
40.00
Road vehicles — Inlet air cleaning equipment for internal combustion engines and compressors — Part 1: Fractional efficiency testing with fine particles (0,3 µm to 5 µm optical diameter)
90.93
Road vehicles — Inlet air cleaning equipment for internal combustion engines and compressors — Part 2: Fractional efficiency testing with coarse particles (5 µm to 40 µm optical diameter)
90.93
Gasoline engines with direct injection — Cleanliness assessment of fuel injection equipment
95.99
Gasoline engines with direct injection — Cleanliness assessment of fuel injection equipment
60.60
Road vehicles — Inlet air filters for internal combustion engines, compressor inlet and passenger compartments — Test for sub-micron filtration
30.99
Gasoline engines with direct fuel injection (GDI engines) — Installation of the high pressure fuel pump to the engine
60.60
Road vehicles — Engine EGR cooler — Heat dissipation test methods
60.60
Diesel engines — NOx reduction agent AUS 32 — Part 1: Quality requirements
95.99
Diesel engines — NOx reduction agent AUS 32 — Part 1: Quality requirements
60.60
Diesel engines — NOx reduction agent AUS 32 — Part 1: Quality requirements — Amendment 1
60.60
Diesel engines — NOx reduction agent AUS 32 — Part 2: Test methods
95.99
Diesel engines — NOx reduction agent AUS 32 — Part 2: Test methods — Technical Corrigendum 1
95.99
Diesel engines — NOx reduction agent AUS 32 — Part 2: Test methods
60.60
Diesel engines — NOx reduction agent AUS 32 — Part 3: Handling, transportation and storing
95.99
Diesel engines — NOx reduction agent AUS 32 — Part 3: Handling, transportation, and storage
90.60
Diesel engines — NOx reduction agent AUS 32 — Part 4: Refilling interface
95.99
Diesel engines — NOx reduction agent AUS 32 — Part 4: Refilling interface
90.92
Diesel engines — NOx reduction agent AUS 32 — Part 4: Refilling interface
40.99
Diesel engines — NOx reduction agent AUS 32 — Part 5: Refilling interface for passenger cars
95.99
Diesel engines — NOx reduction agent AUS 32 — Part 5: Refilling interface for passenger cars
60.60
Gasoline engines with direct fuel injection (GDI engines) — Installation of the injectors to the engine
60.60
Road vehicles — End of life filter — Efficiency
20.00
Road vehicles — Determination of the filtration efficiency of urea filters
40.99
Road vehicles — Injection water — Part 1: Quality requirements
60.60

No matching records found. Please try changing the filter settings.