Filter :
Standard and/or project under the direct responsibility of ISO/TC 22/SC 33 Secretariat Stage ICS
Road vehicles — Braking of automotive vehicles and their trailers — Vocabulary
90.93
Road vehicles — Pneumatic braking connections between motor vehicles and towed vehicles — Interchangeability
90.93
Road vehicles — Passenger car wheels for road use — Test methods
95.99
Road vehicles — Passenger car wheels for road use — Test methods
90.93
Road vehicles — Pressure test connection for compressed-air pneumatic braking equipment
90.93
Road vehicles — Hydraulic pressure test connection for braking equipment
90.93
Road vehicles — Labelling of containers for petroleum-based or non-petroleum-based brake fluid
90.93
Passenger cars — Test track for a severe lane-change manoeuvre — Part 1: Double lane-change
95.99
Passenger cars — Test track for a severe lane-change manoeuvre — Part 1: Double lane-change
60.60
Passenger cars — Test track for a severe lane-change manoeuvre — Part 2: Obstacle avoidance
90.60
Road vehicles — Wheels/rims for commercial vehicles — Test methods
95.99
Road vehicles — Wheels/rims for commercial vehicles — Test methods
90.92
Road vehicles — Wheels/rims for commercial vehicles — Test methods
40.99
Wheels and rims for pneumatic tyres — Vocabulary, designation and marking
95.99
Wheels and rims for pneumatic tyres — Vocabulary, designation and marking
60.60
Road vehicles — Brake hose assemblies for hydraulic braking systems used with non-petroleum-base brake fluid
90.93
Road vehicles — Hydraulic braking systems — Simple flare pipes, tapped holes, male fittings and hose end fittings
90.93
Road vehicles — Pneumatic braking systems — Part 1: Pipes, male fittings and tapped holes with facial sealing surface
90.93
Road vehicles — Pneumatic braking systems — Part 2: Pipes, male fittings and holes with conical sealing surface
90.93
Commercial vehicles — Wheel-hub attachment dimensions
90.92
Commercial vehicles — Wheel-hub attachment dimensions
20.00
Passenger cars — Steady-state circular driving behaviour — Open-loop test methods
95.99
Passenger cars — Steady-state circular driving behaviour — Open-loop test methods
60.60
Road vehicles — Specification of non-petroleum-base brake fluids for hydraulic systems
95.99
Road vehicles — Specification of non-petroleum-based brake fluids for hydraulic systems
60.60
Road vehicles — Hydraulic braking systems — Non-petroleum-base reference fluids
95.99
Road vehicles — Hydraulic braking systems — Non-petroleum-based reference fluid
60.60
Road vehicles — Elastomeric boots for cylinders for drum type hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max.)
90.93
Road vehicles — Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max.)
90.93
Road vehicles — Diaphragm gaskets for hydraulic brake master cylinder reservoirs using a non-petroleum base hydraulic brake fluid
90.93
Road vehicles — Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 150 degrees C max.)
90.93
Road vehicles — Field load specification for brake actuation and modulation systems
60.60
Road vehicles — Elastomeric boots for drum-type, hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 100 degrees C max.)
90.93
Road vehicles — Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (service temperature 70 degrees C max.)
90.93
Road vehicles — Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max.)
90.93
Road vehicles — Brake hose assemblies for hydraulic braking systems used with petroleum-base brake fluid
90.93
Road vehicles — Brake linings — Compressive strain test methods
90.93
Road vehicles — Brake linings — Internal shear strength of lining material — Test procedure
90.93
Road vehicles — Brake linings — Shear test procedure for disc brake pad and drum brake shoe assemblies
90.60
Road vehicles — Brake linings — Effects of heat on dimensions and form of disc brake pads — Test procedure
90.93
Road vehicles — Brake linings — Resistance to water, saline solution, oil and brake fluid — Test procedure
90.93
Road vehicles — Brake linings — Seizure to ferrous mating surface due to corrosion — Test procedure
90.93
Road vehicles — Hydraulic braking systems, including those with electronic control functions, for motor vehicles — Test procedures
90.93
Road vehicles — Air braking systems — Identification of connections on units
90.93
Road vehicles — Light alloy wheels — Impact test
95.99
Road vehicles — Light alloy wheels — Lateral impact test
60.60
Road vehicles — Petroleum-based brake-fluid for stored-energy hydraulic brakes
90.93
Road vehicles — Hydraulic braking systems — ISO reference petroleum base fluid
90.93
Road vehicles — Coiled pipe assemblies for pneumatic braking connection between motor vehicles and towed vehicles — Part 1: Dimensions
90.93
Road vehicles — Coiled tube assemblies for air brake connection between towing and towed vehicles — Part 2: Performance requirements
90.93
Road vehicles — Lateral transient response test methods — Open-loop test methods
90.60
Commercial road vehicles — Flat attachment wheel fixing nuts
90.93
Road vehicles — Thermoplastics tubing for air braking systems
90.93
Road vehicles — Brake linings — Disc brake pads — Evaluation of surface and material flaws after testing
90.93
Road vehicles — Elastomeric O-rings for hydraulic drum brake wheel cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)
90.93
Road vehicles — Elastomeric cups and seals for cylinders for hydraulic braking systems using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)
90.93
Road vehicles — Elastomeric seals for hydraulic disc brake cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)
90.93
Road vehicles — Elastomeric boots for drum type hydraulic brake wheel cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)
90.93
Road vehicles — Compressed air braking systems for towed vehicles including those with electronic braking control functions — Test procedures
90.93
Road vehicles — Air and air/hydraulic braking systems of motor vehicles, including those with electronic control functions — Test procedures
90.93
Passenger cars — Braking in a turn — Open-loop test method
95.99
Passenger cars — Braking in a turn — Open-loop test method
60.60
Road vehicles — Measurement of road surface friction
90.60
Passenger cars — Specifications for mechanical jacks
90.93
Road vehicles — Vehicle dynamics and road-holding ability — Vocabulary
90.93
Road vehicles — Graphical symbols to designate brake fluid types
90.93
Road vehicles — Passenger-car and trailer combinations — Lateral stability test
90.92
Road vehicles — Passenger-car and trailer combinations — Lateral stability test
30.99
Passenger cars — Power-off reaction of a vehicle in a turn — Open-loop test method
95.99
Passenger cars — Power-off reaction of a vehicle in a turn — Open-loop test method
60.60
Road vehicles — Determination of centre of gravity
90.60
Road vehicles — Flat attachment fixing nuts for commercial vehicles — Test methods
90.93
Passenger cars — Simulation model classification — Part 1: Vehicle dynamics
60.60
Heavy commercial vehicles and buses — Open-loop test methods for the quantification of on-centre handling — Weave test and transition test
90.93
Heavy commercial vehicles and buses — Test method for roll stability — Closing-curve test
90.93
Road vehicles — Brake lining assemblies — Inertia dynamometer test method
90.93
Road vehicles — Hydraulic jacks — Specifications
90.93
Road vehicles --Partial driving automation — Technical characteristics of conditional hands-free driving systems
20.00
Road vehicles — Sensitivity to lateral wind — Open-loop test method using wind generator input
90.60
Road vehicles — Braking systems — Temperature measuring methods
95.99
Road vehicles — Endurance braking systems of motor vehicles and towed vehicles — Test procedures
90.93
Road vehicles — Brake lining friction materials — Drag mode friction test for hydraulic and pneumatic vehicle brakes
20.00
Road vehicles — Hydraulic braking systems — Part 1: Double-flare pipes, tapped holes, male fittings and tube seats
90.93
Braking of road vehicles — Considerations on the definition of mean fully developed deceleration
90.60
Road vehicles — Test method for the quantification of on-centre handling — Part 1: Weave test
90.92
Road vehicles — Test method for the quantification of on-centre handling — Part 1: Weave test
30.99
Road vehicles — Test method for the quantification of on-centre handling — Part 2: Transition test
95.99
Road vehicles — Test method for the quantification of on-centre handling — Part 2: Transition test
90.93
Passenger vehicle wheels — Clip balance weight and rim flange nomenclature, test procedures and performance requirements
95.99
Passenger car and light truck vehicle wheels — Clip and adhesive balance weight and rim flange nomenclature, test procedures and performance requirements
60.60
Road vehicles — Wheels and rims — Use, general maintenance and safety requirements and out-of-service conditions
95.99
Road vehicles — Wheels and rims — Use, general maintenance and safety requirements and out-of-service conditions
60.60
Passenger cars — Straight-ahead braking on surfaces with split coefficient of friction — Open-loop test procedure
90.93
Road vehicles — Heavy commercial vehicle combinations and articulated buses — Lateral stability test methods
90.93
Road vehicles — Heavy commercial vehicles and buses — Steady-state circular tests
90.93
Road vehicles — Heavy commercial vehicles and buses — Lateral transient response test methods
90.60
Heavy commercial vehicles and buses — Braking in a turn — Open-loop test methods
90.60
Road vehicles — Vehicle dynamics test methods — Part 1: General conditions for passenger cars
95.99
Road vehicles — Vehicle dynamics test methods — Part 1: General conditions for passenger cars
60.60
Road vehicles — Vehicle dynamics test methods — Part 2: General conditions for heavy vehicles and buses
90.93
Road vehicles — Vehicle dynamics test methods — Part 3: General conditions for passenger cars ride comfort tests
60.60
Road vehicles — Wheels — Nut seat strength tests
90.93
Road vehicles — Brake lining friction materials — Product definition and quality assurance
90.93
Heavy commercial vehicles and buses — Straight-ahead braking on surfaces with split coefficient of friction — Open-loop test method
90.93
Heavy commercial vehicles and buses — Steady-state rollover threshold — Tilt-table test method
90.60
Heavy commercial vehicles and buses — Stopping distance in straight-line braking with ABS — Open loop and closed loop test methods
90.93
Road vehicles — Wheels — Measurement of radial and lateral run-out
90.93
Passenger cars — Free-steer behaviour — Part 1: Steering-release open-loop test method
90.60
Passenger cars — Free-steer behaviour — Part 2: Steering-pulse open-loop test method
90.60
Heavy commercial vehicles and buses — Test method for yaw stability — Sine with dwell test
90.60
Road vehicles — Test devices for target vehicles, vulnerable road users and other objects, for assessment of active safety functions — Part 1: Requirements for passenger vehicle rear-end targets
60.60
Road vehicles — Test devices for target vehicles, vulnerable road users and other objects, for assessment of active safety functions — Part 2: Requirements for pedestrian targets
60.60
Road vehicles — Test devices for target vehicles, vulnerable road users and other objects, for assessment of active safety functions — Part 3: Requirements for passenger vehicle 3D targets
60.60
Road vehicles — Test devices for target vehicles, vulnerable road users and other objects, for assessment of active safety functions — Part 4: Requirements for bicyclist targets
60.60
Road vehicles — Test devices for target vehicles, vulnerable road users and other objects, for assessment of active safety functions — Part 5: Requirements for Powered Two-Wheeler targets
20.00
Road vehicles — Test devices for target vehicles, vulnerable road users and other objects, for assessment of active safety functions — Part 6: Research data and guidelines for surrogate animal targets
20.00
Road vehicles — Test devices for target vehicles, vulnerable road users and other objects, for assessment of active safety functions — Part 7: Test method for target carrier system behaviour
10.99
Passenger cars — Vehicle dynamic simulation and validation — Steady-state circular driving behaviour
90.60
Passenger cars — Validation of vehicle dynamic simulation — Sine with dwell stability control testing
90.60
Heavy commercial vehicles and buses — Emergency braking on a defined path — Test method for trajectory measurement
60.60
Heavy commercial vehicles and buses — Centre of gravity measurements — Axle lift, tilt-table and stable pendulum test methods
60.60
Heavy commercial vehicles and buses — Vehicle dynamics simulation and validation — Steady-state circular driving behavior
60.60
Heavy commercial vehicles and buses — Vehicle dynamics simulation and validation — Lateral dynamic stability of vehicle combinations
60.60
Road vehicles — Braking threshold pressures for heavy commercial vehicle combinations with fully pneumatic braking systems — Test with roller brake tester
90.93
Road vehicles — Test of braking systems on vehicles with a maximum authorized total mass of over 3,5 t using a roller brake tester — Part 1: Pneumatic braking systems
90.93
Road vehicles — Test of braking systems on vehicles with a maximum authorized total mass of over 3,5 t using a roller brake tester — Part 2: Air over hydraulic and purely hydraulic braking systems
90.93
Heavy commercial vehicles and buses — Vehicle dynamics simulation and validation — Closing-curve test
60.60
Road vehicles — Heavy commercial vehicles and buses – Mass moment of inertia measurement
60.60
Road vehicles — Safety enhancement in conjunction with tyre inflation pressure monitoring
90.93
Passenger cars — Stopping distance at straight-line braking with ABS — Open-loop test method
90.92
Passenger cars — Stopping distance at straight-line braking with ABS — Open-loop test method
60.00
Road vehicles — Test of vehicle air braking systems with a permissible mass of over 3,5 t — Acquisition and use of reference values using a roller brake tester
90.60
Road vehicles — Test object monitoring and control for active safety and automated/autonomous vehicle testing — Functional requirements, specifications and communication protocol
50.00
Road vehicles — Heavy commercial vehicles and buses — Calculation method for steady-state rollover threshold
50.20
Heavy commercial vehicles — Vehicle stability during tipper body operation — Tilt-table test method
60.00
Heavy commercial vehicles and buses — Test method for steering effort measurement when manoeuvring at low speed or with stationary vehicle
60.60
Passenger cars — Validation of vehicle dynamics simulation — Lateral transient response test methods
60.60
Road vehicles — Brake linings friction materials — Visual inspection
10.99
Road vehicles — Brake linings frictions materials — Visual inspection
90.92
Road vehicles — Brake lining friction materials — Dynamometer metal pick-up generation procedure for disc brakes
60.60
Road vehicles — Test method to evaluate the performance of autonomous emergency braking systems — Part 1: Car-to-car
95.99
Road vehicles — Test method to evaluate the performance of autonomous emergency braking systems — Part 1: Car-to-car
60.60
Road vehicles — Test method to evaluate the performance of autonomous emergency braking systems — Part 2: Car to pedestrian
30.99
Road vehicles — Test method to evaluate the performance of lane-keeping assistance systems
60.60
Heavy commercial vehicles and buses — Definitions of properties for the determination of suspension kinematic and compliance characteristics
60.60
Heavy commercial vehicles and buses — Tyre model for linear range lateral stability estimation of heavy vehicle combinations
20.60
Road vehicles — Brake lining friction materials — Standard performance test procedure for commercial vehicles with air brakes
90.93
Road vehicles — Brake lining friction materials — Standard wear test procedure for commercial vehicles with air brakes
90.93
Road vehicles — Brake lining friction materials — Friction behaviour assessment for automotive brake systems
90.93
Road vehicles — Brake lining friction materials — Evaluation of corrosion effects on painted backing plates and brake shoes
90.93
Road vehicles — Test scenarios for automated driving systems — Vocabulary
60.00
Road vehicles — Test scenarios for automated driving systems — Scenario based safety evaluation framework
60.00
Road Vehicles — Test scenarios for automated driving systems — Taxonomy for operational design domain
40.60
Road vehicles — Test scenarios for automated driving systems - Scenario categorization
30.60

No matching records found. Please try changing the filter settings.