International Standard
ISO 19085-7:2024
Woodworking machines — Safety — Part 7: Surface planing, thickness planing and combined surface/thickness planing machines
Reference number
ISO 19085-7:2024
Edition 2
2024-08
Preview
ISO 19085-7:2024
84418
недоступно на русском языке
Опубликовано (Версия 2, 2024)

ISO 19085-7:2024

ISO 19085-7:2024
84418
Язык
Формат
CHF 173
Пересчитать швейцарские франки (CHF) в ваша валюта

Тезис

This document specifies the safety requirements and measures for

     surface planing machines, also called jointers,

     thickness planing machines, also called planers or single surface planers, and

     combined surface/thickness planing machines

with fixed cutter block position, with an integrated feed in thickness planing mode, with or without demountable power feed device in planing mode, with manual loading and/or unloading of the workpiece, and capable of continuous production use, altogether referred to as “machines”.

The machines are designed to cut solid wood and material with similar physical characteristics to wood (see ISO 19085-1:2021, 3.2).

This document deals with all significant hazards, hazardous situations and events as listed in Annex A relevant to the machines when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer. Reasonably foreseeable misuse has been considered too. Transport, assembly, dismantling, disabling and scrapping phases have also been taken into account.

This document is also applicable to surface planing machines and combined surface/thickness planing machines fitted with an optional mortising device, whose hazards have been dealt with.

This document does not apply to:

a)       machines with more than one cutter block;

b)       machines with a mortising unit driven by a separate motor;

c)        machines where the cutter block is adjustable for depth of cut setting in thickness planing mode;

d)       machines where the conversion from planing to thickness planing mode or vice versa is achieved by mounting or demounting parts/units;

e)       machines where surface planing and thickness planing can be performed at the same time;

f)         machines intended for use in potentially explosive atmosphere;

g)       machines manufactured prior to the publication of this document.

Общая информация

  •  : Опубликовано
     : 2024-08
    : Опубликование международного стандарта [60.60]
  •  : 2
  • ISO/TC 39/SC 4
    13.110  79.120.10 
  • RSS обновления

Жизненный цикл

Появились вопросы?

Ознакомьтесь с FAQ