Тезис
ПредпросмотрThis International Standard specifies the mechanical, physical and optical characteristics of a 120 mm optical disk to enable
interchange of such disks. It specifies the quality of the recorded signals, the format of the data and the recording method,
thereby allowing for information interchange by means of such disks. The data can be written, read and overwritten many
times using the phase change method. This disk is identified as DVD-RAM.
This International Standard specifies
- two related but different Types of this disk (see clause 7),
- the conditions for conformance,
- the environments in which the disk is to be tested, operated and stored,
- the mechanical, physical and dimensional characteristics of the disk, so as to provide mechanical interchange between data
processing systems,
- the format of the information on the disk, including the physical disposition of the tracks and sectors, the error correcting
codes and the coding method,
- the characteristics of the signals recorded on the disk, thus enabling data processing systems to read the data from the disk.
This International Standard provides for the interchange of disks between optical disk drives. Together with a standard for
volume and file structure, it provides for full data interchange between data processing systems. The optical disks specified by
this International Standard may be enclosed in cases according to ISO/IEC 16825 as specified therein.
-
Текущий статус: PublishedДата публикации: 1999-05
-
Версия: 1
-
Технический комитет: ISO/IEC JTC 1/SC 23 Digitally recorded media for information interchange and storage
-
- ICS :
- 35.220.30 Optical storage devices
Приобрести данный стандарт
Формат | Язык | |
---|---|---|
std 1 208 | Бумажный |
- CHF208
Жизненный цикл
-
Сейчас
PublishedISO/IEC 16824:1999
Стандарт, который пересматривается каждые 5 лет
Этап: 90.93 (Подтверждено)-
00
Предварительная стадия
-
10
Стадия, связанная с внесением предложения
-
20
Подготовительная стадия
-
30
Стадия, связанная с подготовкой проекта комитета
-
40
Стадия, связанная с рассмотрением проекта международного стандарта
-
50
Стадия, на которой осуществляется принятие стандарта
-
60
Стадия, на которой осуществляется публикация
-
90
Стадия пересмотра
-
95
Стадия, на которой осуществляется отмена стандарта
-
00
Появились вопросы?
Ознакомьтесь с FAQ
Часы работы:
Понедельник – пятница: 09:00-12:00, 14:00-17:00 (UTC+1)
Будьте в курсе актуальных новостей ИСО
Подписывайтесь на наши новости, обзоры, а также на информацию о продуктах.