ISO 10882-2:2000
p
ISO 10882-2:2000
26144
недоступно на русском языке

Текущий статус : Опубликовано (Будет пересмотрено)

Последний раз этот стандарт был пересмотрен в  2016. Поэтому данная версия остается актуальной
Это стандарт будет замененоISO/PRF 10882-2
ru
Формат Язык
std 1 129 PDF
std 2 129 Бумажный
  • CHF129
Пересчитать швейцарские франки (CHF) в ваша валюта

Тезис

This part of EN ISO 10882 provides guidance for the determination of personal exposure to gases and vapours in

welding and allied processes. It applies to the following thermal processes used to join, cut, surface or remove

metals:

(111) Manual metal arc welding (metal arc welding with covered electrode); shielded metal arc welding /USA/

(114) Self-shielded tubular-cored arc welding

(131) Metal inert gas welding; MIG welding; gas metal arc welding /USA/

(135) Metal active gas welding; MAG welding; gas metal arc welding /USA/

(136) Tubular-cored metal arc welding with active gas shield; flux cored arc welding /USA/

(137) Tubular-cored metal arc welding with inert gas shield; flux cored arc welding /USA/

(141) Tungsten inert gas arc welding; TIG welding; gas tungsten arc welding /USA/

(15) Plasma arc welding;

(31) Oxy-fuel gas welding; oxy-fuel gas welding /USA/

(52) Laser beam welding;

(912) Flame brazing; torch brazing /USA/

(97) Braze welding;

_ arc and flame gouging;

_ arc and laser cutting processes;

_ flame, plasma and laser and plasma cutting processes;

_ metal-spraying (see EN ISO 4063).

The following gases and vapours which can be produced or be present during welding and allied processes are

covered:

_ ozone (O3);

_ carbon monoxide (CO);

_ carbon dioxide (CO2);

_ nitric oxide (NO) and nitrogen dioxide (NO2);

_ vapours produced in the welding or cutting of metals having paint or other surface coatings.

Fuel, oxidant and shielding gases used in welding and allied processes are not covered.

The general background level of gases and vapours in the workplace atmosphere influences personal exposure,

and therefore the role of fixed point measurements is also considered.

Preview 

Вы можете ознакомиться с данным стандартом в нашей онлайн-библиотеке (OBP)

Общая информация

  •  : Опубликовано
     : 2000-09
    : Между-народный стандарт подлежит пересмотру [90.92]
  •  : 1
  • ISO/TC 44/SC 9
    13.100  25.160.01 
  • RSS обновления

Жизненный цикл

Появились вопросы?

Ознакомьтесь с FAQ

Работа с клиентами
+41 22 749 08 88

Часы работы:
Понедельник – пятница: 09:00-12:00, 14:00-17:00 (UTC+1)