Фильтр :
Стандарт и/или проект находящийся в компетенции ISO/TC 138/SC 5 Секретариата | Этап | ICS |
---|---|---|
Injection-moulded unplasticized poly(vinyl chloride) (PVC-U) fittings — Oven test — Test method and basic specifications
|
95.99 | |
Plastics piping and ducting systems — Injection-moulded thermoplastics fittings — Methods for visually assessing the effects of heating
|
90.93 | |
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 1: General method
|
90.93 | |
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 2: Preparation of pipe test pieces
|
90.60 | |
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 3: Preparation of components
|
90.93 | |
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 4: Preparation of assemblies
|
90.93 | |
Thermoplastics pipes for the conveyance of fluids — Resistance to internal pressure — Test method
|
95.99 | |
Thermoplastics pipes for the conveyance of fluids — Resistance to internal pressure — Test method — Technical Corrigendum 1
|
95.99 | |
Unplasticized polyvinyl chloride (PVC) moulded fittings for elastic sealing ring type joints for use under pressure — Pressure-resistance test
|
95.99 | |
Unplasticized polyvinyl chloride (PVC) injection-moulded solvent-welded socket fittings for use with pressure pipe — Hydraulic internal pressure test
|
95.99 | |
Thermoplastics pipes — Longitudinal reversion — Part 1: Determination methods
|
95.99 | |
Thermoplastics pipes — Longitudinal reversion — Part 2: Determination parameters
|
95.99 | |
Thermoplastics pipes — Longitudinal reversion — Part 2: Determination parameters — Technical Corrigendum 1
|
95.99 | |
Unplasticized polyvinyl chloride (PVC) pipes — Longitudinal reversion — Test methods and specification
|
95.99 | |
Thermoplastics pipes — Longitudinal reversion — Test method and parameters
|
95.99 | |
Thermoplastics pipes — Longitudinal reversion — Test method and parameters
|
60.60 | |
Polyethylene pipes (PE) — Longitudinal reversion — Test methods and specification
|
95.99 | |
Thermoplastics pipes and fittings — Vicat softening temperature — Part 1: General test method
|
90.92 | |
Thermoplastics pipes and fittings — Vicat softening temperature — Part 1: General test method
|
20.98 |
|
Thermoplastics pipes and fittings — Vicat softening temperature — Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes
|
90.92 | |
Thermoplastics pipes and fittings — Vicat softening temperature — Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes
|
20.98 |
|
Thermoplastics pipes and fittings — Vicat softening temperature — Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings
|
90.92 | |
Thermoplastics pipes and fittings — Vicat softening temperature — Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings
|
20.98 |
|
Unplasticized polyvinyl chloride (PVC) pipes and fittings — Vicat softening temperature — Test method and specification
|
95.99 | |
Thermoplastics pipes and fittings - Vicat softening temperature: General test method and test conditions for Vinyl chloride - based (PVC-U, PVC-C, PVC-Hi) and Acryl nitrile - based (ABS, ASA) Pipes and Fittings
|
30.99 | |
Unplasticized polyvinyl chloride (PVC) pipes — Water absorption — Determination and specification
|
95.99 | |
Unplasticized polyvinyl chloride (PVC) pipes for potable water supply — Extractability of lead and tin — Test method
|
90.93 | |
Plastics pipes — Measurement of dimensions
|
95.99 | |
Plastics piping systems — Plastics components — Determination of dimensions
|
90.93 | |
Thermoplastics pipes — Determination of resistance to external blows — Round-the-clock method
|
90.93 | |
Polypropylene pipes — Burst test requirements
|
95.99 | |
Polypropylene (PP) pipes — Effect of time and temperature on expected strength
|
95.99 | |
Polypropylene (PP) pipes — Effect of time and temperature on the expected strength
|
90.93 | |
Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for leaktightness under internal pressure
|
90.93 | |
Plastic piping systems — Mechanical joints between fittings and pressure pipes — Test method for leaktightness under negative pressure
|
95.99 | |
Plastic piping systems — Mechanical joints between fittings and pressure pipes — Test method for leaktightness under negative pressure
|
60.60 | |
Unplasticized polyvinyl chloride (PVC) pipes — Specification and determination of resistance to acetone
|
95.99 | |
Unplasticized polyvinyl chloride (PVC) pipes — Effect of sulphuric acid — Requirement and test method
|
95.99 | |
Unplasticized polyvinyl chloride (PVC) pipes — Specification and measurement of opacity
|
95.99 | |
Polypropylene (PP) pipes and fittings — Density — Determination and specification
|
95.99 | |
Polypropylene (PP) pipes — Maximum permissible longitudinal reversion
|
95.99 | |
Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for resistance to pull-out under constant longitudinal force
|
95.99 | |
Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for resistance to pull-out under constant longitudinal force
|
60.60 | |
Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for leaktightness under internal pressure of assemblies subjected to bending
|
90.93 | |
Chlorinated polyvinyl chloride (CPVC) pipes and fittings — Specification and determination of density
|
90.93 | |
Polyethylene (PE) pipes — Pressure drop in mechanical pipe-jointing systems — Method of test and requirements
|
90.93 | |
Polyvinylidene fluoride (PVDF) — Effect of time and temperature on expected strength
|
40.20 | |
Polysulfone (PSU) — Effect of time and temperature on expected strength
|
40.20 | |
Polyphenylsulphone (PPSU) — Effect of time and temperature on expected strength
|
40.60 | |
Unplasticized polyvinyl chloride (PVC) pipes and fittings — Determination and specification of density
|
90.93 | |
Thermoplastics pipes and fittings — Determination of melt mass-flow rate — Part 1: Test method
|
95.99 | |
Thermoplastics pipes and fittings — Determination of melt mass-flow rate — Part 2: Test conditions
|
95.99 | |
Polyethylene (PE) pipes and fittings — Determination of reference density of uncoloured and black polyethylenes
|
95.99 | |
Thermoplastics pipes — Determination of tensile properties — Part 1: General test method
|
95.99 | |
Thermoplastics pipes — Determination of tensile properties — Part 1: General test method
|
90.93 | |
Thermoplastics pipes — Determination of tensile properties — Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly (vinyl chloride) (PVC-C) and high-impact poly (vinyl chloride) (PVC-HI)
|
95.99 | |
Thermoplastics pipes — Determination of tensile properties — Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), oriented unplasticized poly(vinyl chloride) (PVC-O), chlorinated poly(vinyl chloride) (PVC-C) and high-impact poly(vinyl chloride) (PVC-HI)
|
60.60 | |
Thermoplastics pipes — Determination of tensile properties — Part 3: Polyolefin pipes
|
95.99 | |
Thermoplastics pipes — Determination of tensile properties — Part 3: Polyolefin pipes
|
90.93 | |
Polyolefin pipes and fittings — Determination of carbon black content by calcination and pyrolysis — Test method and basic specification
|
95.99 | |
Polyolefin pipes and fittings — Determination of carbon black content by calcination and pyrolysis — Test method
|
90.60 | |
Unplasticized polyvinyl chloride (PVC-U) pipes for drinking water supply — Extractability of cadmium and mercury occurring as impurities
|
95.99 | |
Pipes and fittings of acrylonitrile/butadiene/styrene (ABS) — General specification for moulding and extrusion materials
|
90.93 | |
Pipes and fittings of acrylonitrile/styrene/acrylester (ASA) — General specification for moulding and extrusion materials
|
90.93 | |
Adhesives with solvents for assembly of PVC-U pipe elements — Characterization — Part 1: Basic test methods
|
90.93 | |
Unplasticized poly(vinyl chloride) (PVC-U) pipes — Dichloromethane test
|
95.99 | |
Plastics pipes and fittings — Opacity — Test method
|
95.99 | |
Plastics pipes and fittings — Determination of opacity
|
90.60 | |
Unplasticized polyamide (PA-U) pipes — Effect of time and temperature on the expected strength
|
40.60 | |
Thermoplastics pipes and fittings — Water absorption — Part 1: General test method
|
90.93 | |
Thermoplastics pipes and fittings — Water absorption — Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings
|
90.93 | |
Thermoplastics pipes and fittings — Water absorption — Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) pipes and fittings
|
90.93 | |
Plastics pipes for the transport of water intended for human consumption — Extractability of constituents — Test method
|
95.99 | |
Plastics piping systems for the conveyance of water intended for human consumption — Migration assessment — Determination of migration values for plastics pipes
|
95.99 | |
Plastics piping systems for the transport of water intended for human consumption — Migration assessment — Determination of migration values of plastics pipes and fittings and their joints
|
90.93 | |
Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
|
95.99 | |
Thermoplastics pipes for the transport of fluids — Methods of extrapolation of hydrostatic stress rupture data to determine the long-term hydrostatic strength of thermoplastics pipe materials
|
95.99 | |
Thermoplastics pipes for the transport of fluids — Methods of extrapolation of hydrostatic stress rupture data to determine the long-term hydrostatic strength of thermoplastics pipe materials — Technical Corrigendum 1
|
95.99 | |
Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
|
90.93 | |
Adhesives for thermoplastic piping systems — Part 1: Determination of film properties
|
90.60 | |
Adhesives for thermoplastic piping systems — Part 2: Determination of shear strength
|
95.99 | |
Adhesives for thermoplastic piping systems — Part 2: Determination of shear strength
|
90.93 | |
Adhesives for thermoplastic piping systems — Part 3: Test method for the determination of resistance to internal pressure
|
90.60 | |
Polyolefin pipe assemblies with or without jointed fittings — Resistance to internal pressure — Test method
|
95.99 | |
Unplasticized poly(vinyl chloride) (PVC-U) pipes — Dichloromethane resistance at specified temperature (DCMT) — Test method
|
95.99 | |
Unplasticized poly(vinyl chloride) (PVC-U) pipes — Dichloromethane resistance at specified temperature (DCMT) — Test method
|
90.93 | |
Injection-moulded unplasticized poly(vinyl chloride) (PVC-U) fittings for pressure pipe systems — Crushing test
|
90.92 | |
Injection-moulded unplasticized poly(vinyl chloride) (PVC-U) fittings for pressure pipe systems — Crushing test
|
20.20 |
|
Thermoplastics pipes for the transport of fluids — Determination of pendulum impact strength by the Charpy method — Part 1: General test method
|
95.99 | |
Thermoplastics pipes for the transport of fluids — Determination of Charpy impact properties — Part 1: General test method
|
60.60 | |
Thermoplastics pipes for the transport of fluids — Determination of pendulum impact strength by the Charpy method — Part 2: Test conditions for pipes of various materials
|
95.99 | |
Thermoplastics pipes for the transport of fluids — Determination of Charpy impact properties — Part 2: Test conditions for pipes of various materials
|
60.60 | |
Thermoplastics pipes — Determination of creep ratio
|
95.99 | |
Thermoplastics pipes — Determination of creep ratio
|
95.99 | |
Thermoplastics pipes — Determination of creep ratio
|
90.93 | |
Thermoplastics pipes — Determination of ring stiffness
|
95.99 | |
Thermoplastics pipes — Determination of ring stiffness
|
95.99 | |
Thermoplastics pipes — Determination of ring stiffness
|
90.93 | |
Crosslinked polyethylene (PE-X) pipes — Effect of time and temperature on the expected strength
|
95.99 | |
Crosslinked polyethylene (PE-X) and crosslinked medium density polyethylene (PE-MDX) — Effect of time and temperature on expected strength
|
90.60 | |
Pipes and fittings made of crosslinked polyethylene (PE-X) — Estimation of the degree of crosslinking by determination of the gel content
|
95.99 | |
Pipes and fittings made of crosslinked polyethylene (PE-X) — Estimation of the degree of crosslinking by determination of the gel content
|
95.99 | |
Pipes and fittings made of crosslinked polyethylene (PE-X) — Estimation of the degree of crosslinking by determination of the gel content — Amendment 1
|
95.99 | |
Pipes and fittings made of crosslinked polyethylene (PE-X) — Estimation of the degree of crosslinking by determination of the gel content
|
90.93 | |
Thermoplastics pipes — Determination of resistance to external blows — Staircase method
|
90.93 | |
Plastics pipes and fittings — Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting
|
95.99 | |
Plastics pipes and fittings — Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting
|
95.99 | |
Plastics pipes and fittings — Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting
|
90.93 | |
Plastics pipes and fittings — Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion
|
95.99 | |
Plastics pipes and fittings — Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion
|
90.93 | |
Method for the assessment of the degree of carbon black dispersion in polyolefin pipes, fittings and compounds
|
95.99 | |
Fusion compatibility of polyethylene (PE) pipes and fittings
|
95.99 | |
Unplasticized poly(vinyl chloride) (PVC-U) pressure pipes — Determination of the fracture toughness properties
|
90.60 | |
Structured-wall thermoplastics pipes — Oven test
|
90.93 | |
Fittings, valves and other piping system components made of unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C), acrylonitrile-butadiene-styrene (ABS) and acrylonitrile-styrene-acrylester (ASA) for pipes under pressure — Resistance to internal pressure — Test method
|
95.99 | |
Thermoplastics materials for pipes and fittings for pressure applications — Classification and designation — Overall service (design) coefficient
|
95.99 | |
Thermoplastics materials for pipes and fittings for pressure applications — Classification, designation and design coefficient
|
90.93 | |
Polybutene (PB) pipes — Effect of time and temperature on the expected strength
|
95.99 | |
Polybutene-1 (PB-1) pipes — Effect of time and temperature on the expected strength
|
90.93 | |
Plastics piping systems — Pressure systems for hot and cold water — Test method for leaktightness under vacuum
|
90.93 | |
Thermoplastics pipes for the conveyance of fluids — Determination of resistance to rapid crack propagation (RCP) — Small-scale steady-state test (S4 test)
|
95.99 | |
Thermoplastics pipes for the conveyance of fluids — Determination of resistance to rapid crack propagation (RCP) — Small-scale steady-state test (S4 test)
|
90.93 | |
Thermoplastics pipes for the conveyance of fluids — Determination of resistance to rapid crack propagation (RCP) — Full-scale test (FST)
|
95.99 | |
Thermoplastics pipes for the conveyance of fluids — Determination of resistance to rapid crack propagation (RCP) — Full-scale test (FST)
|
90.93 | |
Polyolefin pipes for the conveyance of fluids — Determination of resistance to crack propagation — Test method for slow crack growth on notched pipes (notch test)
|
95.99 | |
Polyolefin pipes for the conveyance of fluids — Determination of resistance to crack propagation — Test method for slow crack growth on notched pipes
|
95.99 | |
Polyolefin pipes for the conveyance of fluids — Determination of resistance to crack propagation — Test method for slow crack growth on notched pipes
|
60.60 | |
Polyethylene pipes — Resistance to slow crack growth — Cone test method
|
90.93 | |
Plastics pipes for the conveyance of fluids under pressure — Miner's rule — Calculation method for cumulative damage
|
90.60 | |
Plastics pipes and fittings — Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20 degrees C
|
95.99 | |
Plastics pipes and fittings — Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20 degrees C
|
90.93 | |
Plastics piping systems — Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes — Test method for leaktightness under negative pressure, angular deflection and deformation
|
95.99 | |
Plastics piping systems — Elastomeric-sealing-ring-type socket joints for use with plastic pipes — Test method for leaktightness under negative pressure, angular deflection and deformation
|
60.60 | |
Plastics piping systems — Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes — Test method for leaktightness under internal pressure and with angular deflection
|
90.93 | |
Plastics pipes and fittings — Bending-tensile cycle test for PE/metal transition fittings, PE tapping tees and PE branch saddles
|
90.93 | |
Method for the assessment of the degree of pigment dispersion in polyolefin pipes, fittings and compounds
|
95.99 | |
Plastics piping systems — Test method for the resistance of polyolefin pipe/pipe or pipe/fitting assemblies to tensile loading
|
95.99 | |
Plastics piping systems — Test method for the resistance of plastic pipe/pipe or pipe/fitting assemblies to tensile loading
|
90.93 | |
Polyethylene (PE) pipes and fittings — Determination of the tensile strength and failure mode of test pieces from a butt-fused joint
|
90.93 | |
Polyethylene (PE) pipes and fittings — Determination of the tensile strength and failure mode of test pieces from a butt-fused joint — Amendment 1
|
60.60 | |
Plastics pipes and fittings — Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm
|
90.92 | |
Plastics pipes and fittings — Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm — Amendment 1
|
60.60 | |
Plastics pipes and fittings — Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm
|
30.60 |
|
Plastics pipes and fittings — Crushing decohesion test for polyethylene (PE) electrofusion assemblies
|
90.20 | |
Plastics pipes and fittings — Crushing decohesion test for polyethylene (PE) electrofusion assemblies — Amendment 1
|
60.60 | |
Plastics pipes and fittings — Decohesion test of polyethylene (PE) saddle fusion joints — Evaluation of ductility of fusion joint interface by tear test
|
90.92 | |
Plastics pipes and fittings — Decohesion test of polyethylene (PE) saddle fusion joints — Evaluation of ductility of fusion joint interface by tear test
|
30.60 |
|
Plastics pipes and fittings — Polyethylene (PE) tapping tees — Test method for impact resistance
|
90.60 | |
Thermoplastics fittings — Determination of ring stiffness
|
95.99 | |
Thermoplastics fittings — Determination of ring stiffness
|
90.93 | |
Plastics piping and ducting systems — Thermoplastics pipes — Determination of ring flexibility
|
95.99 | |
Plastics piping and ducting systems — Thermoplastics pipes — Determination of ring flexibility
|
90.93 | |
Thermoplastics materials — Preparation of tubular test pieces for the determination of the hydrostatic strength of materials used for injection moulding
|
90.93 | |
Adhesives for thermoplastic piping systems — Test method for the determination of thermal stability of adhesives
|
90.93 | |
Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe and fitting products (PENT)
|
90.20 | |
Thermoplastics pipes for the conveyance of fluids — Determination of the slow cracking resistance of pipes and fittings using the Notched Ring Test (NRT)
|
90.93 | |
Plastics piping and ducting systems — Plastics pipes and fittings — Method for exposure to direct (natural) weathering
|
90.60 | |
Plastics pipes and fittings — Definitions of types of test
|
90.93 | |
Thermoplastic pipes for the conveyance of fluids — Inspection of polyethylene electrofusion socket joints using phased array ultrasonic testing
|
95.99 | |
Thermoplastic pipes for the conveyance of fluids — Inspection of polyethylene electrofusion socket joints using phased array ultrasonic testing
|
60.60 | |
Plastics piping systems — Multilayer pipes — Test method for the adhesion of the different layers using a pulling rig
|
90.93 | |
Plastics piping systems — Multilayer pipes — Determination of the oxygen permeability of the barrier pipe
|
90.93 | |
Plastics piping systems — Multilayer pipes — Determination of the oxygen permeability of the barrier pipe — Technical Corrigendum 1
|
60.60 | |
Plastics piping systems — Multilayer pipes — Determination of long-term strength
|
90.93 | |
Plastics piping systems — Fittings, valves and ancillaries — Determination of gaseous flow rate/pressure drop relationships
|
90.93 | |
Plastics piping systems — Multilayer M (metal) pipes — Test method for strength of the weld line in the metal layer and bonding between layers by use of a cone
|
90.93 | |
Rigid PVC pipes — Differential scanning calorimetry (DSC) method — Part 1: Measurement of the processing temperature
|
90.93 | |
Rigid PVC pipes — Differential scanning calorimetry (DSC) method — Part 2: Measurement of the enthalpy of fusion of crystallites
|
90.93 | |
Polyethylene (PE) materials for piping systems — Determination of Strain Hardening Modulus in relation to slow crack growth — Test method
|
90.92 | |
Polyethylene (PE) materials for piping systems — Determination of Strain Hardening Modulus in relation to slow crack growth — Test method
|
40.00 | |
Polyethylene (PE) materials for piping systems — Determination of resistance to slow crack growth under cyclic loading — Cracked Round Bar test method
|
90.92 | |
Polyethylene (PE) materials for piping systems — Determination of resistance to slow crack growth under cyclic loading — Cracked Round Bar test method
|
20.20 |
|
Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds
|
90.92 | |
Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds — Amendment 1
|
60.60 | |
Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds
|
40.99 | |
Plastics piping systems — Thermoplastics pipes and fittings for hot and cold water — Test method for the resistance of joints to pressure cycling
|
90.93 | |
Plastics piping systems — Thermoplastics pipes and fittings for hot and cold water — Test method for the resistance of mounted assemblies to temperature cycling
|
90.93 | |
Plastics piping systems — Polyolefin pipes and mechanical fitting assemblies — Test method for the resistance to end load (AREL test)
|
90.93 | |
Plastics pipes and fittings — Format of a technical file for characterizing PE spigot end fittings
|
90.93 | |
Plastics pipes and fittings — Decohesion test of electrofusion assemblies — Strip-bend test
|
90.93 | |
Thermoplastic pipes for the conveyance of fluids — Inspection of polyethylene butt fusion joints using phased array ultrasonic testing
|
95.99 | |
Thermoplastic pipes for the conveyance of fluids — Inspection of polyethylene butt fusion joints using phased array ultrasonic testing
|
60.60 | |
Thermoplastics pipes for the conveyance of fluids — Determination of the stress-rupture resistance of moulding materials using plain strain grooved tensile (PSGT) specimens
|
90.93 | |
Pipes made of raised-temperature-resistance polyethylene (PE-RT) — Effect of time and temperature on the expected strength
|
95.99 | |
Polyethylene of raised temperature resistance (PE-RT) pipes — Effect of time and temperature on the expected strength
|
90.92 | |
Polyethylene of raised temperature resistance (PE-RT) pipes — Effect of time and temperature on the expected strength
|
40.20 | |
Thermoplastic pipes for the conveyance of fluids — Inspection of polyethylene butt fusion joints using time of flight diffraction testing
|
50.00 | |
Plastics piping systems — Determination of metal migration values of plastic pipes, fittings and their joints.
|
20.20 |
|
Plastics pipes and fittings — Definition and construction procedures for reference lines
|
90.93 |
По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.