Подкомитет Заголовок подкомитета Опубликованные стандарты Стандарты, находящиеся на стадии разработки
ISO/TC 29/SC 5 Grinding wheels and abrasives 61 2
ISO/TC 29/SC 8 Tools for pressing and moulding 70 6
ISO/TC 29/SC 9 Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces 219 2
ISO/TC 29/SC 10 Assembly tools for screws and nuts, pliers and nippers 55 3
Фильтр :
Стандарт и/или проект находящийся в компетенции ISO/TC 29 Секретариата Этап ICS
Files and rasps — Part 1: Dimensions
90.93
Files and rasps — Part 2: Characteristics of cut
90.93
Withdrawal of ISO 234-1975
95.99
Withdrawal of ISO 235/1-1975
95.99
Withdrawal of ISO 235/2-1972
95.99
Long fluted machine reamers, Morse taper shanks
95.99
Reduction sleeves and extension sockets for tools with Morse taper shanks
95.99
Drill chuck tapers
95.99
Milling cutters — Interchangeability dimensions for cutter arbors or cutter mandrels — Metric series and inch series
95.99
Milling cutters — Recommended range of outside diameters
95.99
Withdrawal of ISO/R 524-1966
95.99
Bonded abrasive products — General features — Designation, ranges of dimensions, and profiles
95.99
Short machine taps and hand taps
95.99
Short machine taps and hand taps — Amendment 1
95.99
Short machine taps and hand taps — Amendment 2
95.99
Machine tools — Mounting of plain grinding wheels by means of hub flanges
95.99
Milling machine arbors with 7/24 tapers — Part 1: Dimensions
95.99
Indexable (throwaway) carbide inserts without fixation hole — Dimensions
95.99
Combinations of double-ended wrench gaps
95.99
Assembly tools for bolts and screws — Hexagon drive ends for power tools
95.99
Assembly tools for bolts and screws — Driving squares for power socket wrenches and hand socket wrenches — Amendment 1
95.99
Shanks for pneumatic tools and fitting dimensions of chuck bushings
90.93
Shanks for pneumatic tools and fitting dimensions of chuck bushings — Addendum 1
60.60
Withdrawal of ISO/R 1571-1970
95.99
End mills and slot drills — Part 1: Milling cutters with parallel shanks
95.99
End mills and slot drills — Part 3: Milling cutters with 7/24 taper shanks
95.99
Tube drawing mandrels
90.60
Tube drawing mandrels — Amendment 1
60.60
Wire, bar and tube drawing dies — Specifications
90.93
Wire, bar and tube drawing dies — Specifications — Amendment 2
60.60
Hand operated wrenches and sockets — Technical specifications — Amendment 1
95.99
Assembly tools for screws and nuts — Forged and tubular socket wrenches — Maximum outside head dimensions
95.99
Long shank machine taps with nominal diameters from 3 to 24 mm and 1/8 to 1 in
95.99
Long shank machine taps with nominal diameters from 3 to 24 mm and 1/8 to 1 in — Amendment 1
95.99
Hand taps for pipe threads for parallel and taper threads — General dimensions and marking
95.99
Withdrawal of ISO 2324-1972
95.99
Hacksaw blades — Part 1: Dimensions for hand blades
90.93
Hacksaw blades — Part 2: Dimensions for machine blades
95.99
Hand and machine hacksaw blades — Dimensions for lengths up to 450 mm and pitches up to 6,3 mm
95.99
Screwdriver bits, for slotted head screws, with male hexagon drive
95.99
Truncated cone abrasive sleeves — Designation — Dimensions — Tolerances
95.99
Truncated cone abrasive sleeves — Designation — Dimensions — Tolerances — Addendum 1
95.99
Hand- and machine-operated circular screwing dies and hand-operated die stocks
95.99
Hand- and machine-operated circular screwing dies and hand-operated die stocks — Amendment 1
95.99
Hand- and machine-operated circular screwing dies and hand-operated die stocks — Amendment 2
95.99
Tool shanks and equipment with 7/24 tapers — Collar dimensions
95.99
Shell end mills with plain bore and tenon drive — Metric series
95.99
Assembly tools for screws and nuts — Power and hand operated square drive sockets — Metric series
95.99
Woodworking tools — Metal bodied planes
95.99
Woodworking tools — Plane irons
95.99
Woodworking tools — Chisels and gouges
95.99
Woodworking tools — Chisels and gouges
90.93
Woodworking tools — Wooden bodied planes
95.99
Milling cutters with tenon drive — Interchangeability dimensions with cutter arbors — Metric series
95.99
Milling cutters with tenon drive — Interchangeability dimensions with cutter arbors — Metric series
95.99
Wire, bar or tube drawing dies — As sintered pellets of hard metal (carbide) — Dimensions
95.99
Wire, bar or tube drawing dies — As-sintered pellets of hardmetal (carbide) — Dimensions
90.93
Basic quantities in cutting and grinding — Part 1: Geometry of the active part of cutting tools — General terms, reference systems, tool and working angles, chip breakers
90.93
Basic quantities in cutting and grinding — Part 1: Geometry of the active part of cutting tools — General terms, reference systems, tool and working angles, chip breakers — Amendment 1
60.60
Basic quantities in cutting and grinding — Part 2: Geometry of the active part of cutting tools — General conversion formulae to relate tool and working angles
90.93
Basic quantities in cutting and grinding — Part 3: Geometric and kinematic quantities in cutting
90.93
Basic quantities in cutting and grinding — Part 4: Forces, energy, power
90.93
Basic quantities in cutting and grinding — Part 5: Basic terminology for grinding processes using grinding wheels
90.93
Assembly tools for screws and nuts — Hexagon insert bits for hexagon socket head screws
95.99
Extra long Morse taper shank twist drills
95.99
Extra long parallel shank twist drills
95.99
Assembly tools for screws and nuts — Driving parts for hand-operated square drive socket wrenches — Torque testing
95.99
Assembly tools for screws and nuts — Attachments for hand-operated square drive socket wrenches — Torque testing
95.99
Assembly tools for screws and nuts — Open-end double-head engineers' wrenches, double-head box wrenches and combination wrenches — Maximum widths of heads
95.99
T-slot cutters with plain or flatted parallel shanks and with Morse taper shanks having tapped hole — Metric series
95.99
Parallel shanks for milling cutters — Part 1: Dimensional characteristics of plain parallel shanks
95.99
Parallel shanks for milling cutters — Part 1: Dimensional characteristics of plain parallel shanks
95.99
Parallel shanks for milling cutters — Part 2: Dimensional characteristics of flatted parallel shanks
95.99
Parallel shanks for milling cutters — Part 2: Dimensional characteristics of flatted parallel shanks
95.99
Cylindrical shanks for milling cutters — Part 2: Dimensional characteristics of flatted cylindrical shanks
95.99
Cylindrical shanks for milling cutters — Part 2: Dimensional characteristics of flatted cylindrical shanks
95.99
Cylindrical shanks for milling cutters — Part 2: Dimensional characteristics of flatted cylindrical shanks
95.99
Indexable (throwaway) carbide inserts with cylindrical fixation hole — Dimensions
95.99
Indexable (throwaway) carbide inserts for milling cutters — Dimensions — Part 1: Square inserts
95.99
Indexable (throwaway) hardmetal inserts for milling cutters — Dimensions — Part 2: Triangular inserts
95.99
Subland twist drills with Morse taper shanks for holes prior to tapping screw threads
95.99
Subland twist drills with parallel shanks for holes prior to tapping screw threads
95.99
Tool-life testing with single-point turning tools
95.99
Inverse dovetail cutters and dovetail cutters with parallel shanks
95.99
Inverse dovetail cutters and dovetail cutters with parallel shanks
95.99
Coated abrasives — Flap wheels with shafts — Designation and dimensions
95.99
Reduction sleeves with tenon drive with external and internal 7/24 taper — Dimensions
95.99
Cutter arbors with tenon drive — Dimensions
95.99
Cutter arbors with tenon drive — Dimensions
95.99
Reduction sleeves with external 7/24 taper for tools with Morse taper shanks
95.99
Countersinks, 90 degrees, with parallel shanks and solid pilot
95.99
Counterbores with parallel shanks and solid pilots
95.99
Hand- and machine-operated circular screwing dies for taper pipe threads — R series
95.99
Hand- and machine-operated circular screwing dies for parallel pipe threads — G series
95.99
Jig bushes and accessories for drilling purposes — Dimensions
95.99
Metal cutting band saw blades — Part 3: Characteristics relating to each type of blade
95.99
Machine tools — Positive drive of Morse tapers
95.99
Tool chucks (end mill holders) with clamp screws for flatted parallel shank tools — Part 1: Dimensions of the driving system of tool shanks
95.99
Tool chucks (end mill holders) with clamp screws for flatted parallel shank tools — Part 1: Dimensions of the driving system of tool shanks
95.99
Tool chucks (end mill holders) with clamp screws for flatted parallel shank tools — Part 2: Connecting dimensions of chucks
95.99
Reduction sleeves with 7/24 external and Morse internal taper and incorporated screw
95.99
Rotary percussive masonry drills with hardmetal tips — Dimensions
95.99
Rotary and rotary impact masonry drill bits with hardmetal tips — Dimensions
95.99
Turning and copying tool holders and cartridges for indexable (throwaway) inserts — Designation
95.99
Cartridges, type A, for indexable inserts — Dimensions
95.99
Pliers and nippers — Nomenclature — Addendum 1
95.99
Pliers and nippers — General technical requirements
95.99
Pliers and nippers — Methods of test
95.99
Pliers and nippers — Pliers for gripping and manipulating — Dimensions
95.99
Pliers and nippers — Engineer's and lineman's pliers — Dimensions
95.99
Pliers and nippers — Lever assisted side cutting pliers, end and diagonal cutting nippers — Dimensions
95.99
Pliers and nippers — End cutting nippers — Dimensions
95.99
Pliers and nippers — End cutting nippers — Dimensions — Addendum 1
95.99
Pliers and nippers — Diagonal cutting nippers — Dimensions
95.99
Pliers and nippers — Diagonal cutting nippers — Dimensions — Addendum 1
95.99
Ejector pins with cylindrical head — Basic dimensions
95.99
Dimensions of hexagonal dienuts
95.99
Tool shanks with 7/24 taper for automatic tool changers — Part 1: Shanks Nos. 40, 45 and 50 — Dimensions — Addendum 1: Conicity tolerances
95.99
Tool shanks with 7/24 taper for automatic tool changers — Part 3: Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF
95.99
Long shank taps with nominal diameters from M3 to M10 — Taps with reinforced shank and recess
95.99
7/24 tapers for tool shanks for automatic changing — Tapers for spindle noses
95.99
Cutter arbors with parallel key and tenon drive — Part 1: General dimensions
95.99
Cutter arbors with parallel key and tenon drive — Part 2: Dimensions and designation of tool holders with hollow taper interface with flange contact surface
95.99
Cutter arbors with parallel key and tenon drive — Part 3: Dimensions and designation of tool holders with 7/24 taper for automatic tool changers
95.99
Cutter arbors with parallel key and tenon drive — Part 4: Dimensions and designation of tool holders with 7/24 taper without automatic tool changers
95.99
Tool holders with cylindrical shank — Part 1: Cylindrical shank, location bore — Technical delivery conditions
95.99
Tool holders with cylindrical shank — Part 2: Type A, shanks for tool holders of special designs
95.99
Tool holders with cylindrical shank — Part 2: Type A, shanks for tool holders of special designs
95.99
Tool holders with cylindrical shank — Part 3: Type B with rectangular radial seat
95.99
Tool holders with cylindrical shank — Part 3: Type B with rectangular radial seat
95.99
Tool holders with cylindrical shank — Part 4: Type C with rectangular axial seat
95.99
Tool holders with cylindrical shank — Part 4: Type C with rectangular axial seat
95.99
Tool holders with cylindrical shank — Part 5: Type D with more than one rectangular seat
95.99
Tool holders with cylindrical shank — Part 6: Type E with cylindrical seat
95.99
Tool holders with cylindrical shank — Part 6: Type E with cylindrical seat
95.99
Tool holders with cylindrical shank — Part 7: Type F with taper seat
95.99
Tool holders with cylindrical shank — Part 7: Type F with taper seat
95.99
Collets for tool holders with taper ratio 1:10 — Collets, hoders,nuts
95.99
Hollow taper interface with flange contact surface — Part 3: Dimensions of shanks for stationary tools
95.99
Hollow taper interface with flange contact surface — Part 4: Dimensions of receivers for stationary tools
95.99
Cutting tool data representation and exchange — Part 1: Overview, fundamental principles and general information model
90.93
Cutting tool data representation and exchange — Part 1: Overview, fundamental principles and general information model — Amendment 1
60.60
Cutting tool data representation and exchange — Part 1: Overview, fundamental principles and general information model — Technical Corrigendum 1
60.60
Cutting tool data representation and exchange — Part 1: Overview, fundamental principles and general information model — Technical Corrigendum 2
60.60
Cutting tool data representation and exchange — Part 2: Reference dictionary for the cutting items
95.99
Cutting tool data representation and exchange — Part 2: Reference dictionary for the cutting items — Technical Corrigendum 1
95.99
Cutting tool data representation and exchange — Part 2: Reference dictionary for the cutting items
95.99
Cutting tool data representation and exchange — Part 2: Reference dictionary for the cutting items
60.60
Cutting tool data representation and exchange — Part 3: Reference dictionary for tool items
95.99
Cutting tool data representation and exchange — Part 3: Reference dictionary for tool items — Technical Corrigendum 1
95.99
Cutting tool data representation and exchange — Part 3: Reference dictionary for tool items
95.99
Cutting tool data representation and exchange — Part 3: Reference dictionary for tool items
60.60
Cutting tool data representation and exchange — Part 4: Reference dictionary for adaptive items
95.99
Cutting tool data representation and exchange — Part 4: Reference dictionary for adaptive items — Technical Corrigendum 1
95.99
Cutting tool data representation and exchange — Part 4: Reference dictionary for adaptive items
95.99
Cutting tool data representation and exchange — Part 4: Reference dictionary for adaptive items
60.60
Cutting tool data representation and exchange — Part 5: Reference dictionary for assembly items
95.99
Cutting tool data representation and exchange — Part 5: Reference dictionary for assembly items — Technical Corrigendum 1
95.99
Cutting tool data representation and exchange — Part 5: Reference dictionary for assembly items
90.93
Cutting tool data representation and exchange — Part 6: Assembly of cutting tool components
20.00
Cutting tool data representation and exchange — Part 50: Reference dictionary for reference systems and common concepts
95.99
Cutting tool data representation and exchange — Part 50: Reference dictionary for reference systems and common concepts — Technical Corrigendum 1
95.99
Cutting tool data representation and exchange — Part 50: Reference dictionary for reference systems and common concepts
90.93
Cutting tool data representation and exchange — Part 60: Reference dictionary for connection systems
95.99
Cutting tool data representation and exchange — Part 60: Reference dictionary for connection systems — Technical Corrigendum 1
95.99
Cutting tool data representation and exchange — Part 60: Reference dictionary for connection systems
90.60
Cutting tool data representation and exchange — Part 61: Company codes
20.00
Cutting tool data representation and exchange — Part 70: Graphical data layout — Layer setting for tool layout
90.93
Cutting tool data representation and exchange — Part 71: Graphical data layout — Creation of documents for standardized data exchange: Graphical product information
90.93
Cutting tool data representation and exchange — Part 72: Creation of documents for the standardized data exchange — Definition of properties for drawing header and their XML-data exchange
90.93
Cutting tool data representation and exchange — Part 80: Creation and exchange of 3D models — Overview and principles
95.99
Cutting tool data representation and exchange — Part 80: Creation and exchange of 3D models — Overview and principles
90.93
Cutting tool data representation and exchange — Part 90: Container file for exchange of properties, data and 3D models
10.99
Cutting tool data representation and exchange — Part 100: Definitions, principles and methods for reference dictionaries
95.99
Cutting tool data representation and exchange — Part 100: Definitions, principles and methods for reference dictionaries
90.93
Cutting tool data representation and exchange — Part 100: Definitions, principles and methods for reference dictionaries — Technical Corrigendum 1
60.60
Cutting tool data representation and exchange — Part 150: Usage guidelines
90.93
Cutting tool data representation and exchange — Part 201: Creation and exchange of 3D models — Regular inserts
90.20
Cutting tool data representation and exchange — Part 202: Creation and exchange of 3D models — Irregular inserts
90.93
Cutting tool data representation and exchange — Part 203: Creation and exchange of 3D models — Replaceable inserts for drilling
90.93
Cutting tool data representation and exchange — Part 204: Creation and exchange of 3D models — Inserts for reaming
90.93
Cutting tool data representation and exchange — Part 301: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of thread-cutting taps, thread-forming taps and thread-cutting dies
90.93
Cutting tool data representation and exchange — Part 302: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of solid drills and countersinking tools
90.93
Cutting tool data representation and exchange — Part 303: Creation and exchange of 3D models — Solid end mills
90.93
Cutting tool data representation and exchange — Part 304: Creation and exchange of 3D models — Solid milling cutters with arbor hole
90.93
Cutting tool data representation and exchange — Part 305: Creation and exchange of 3D models — Modular tooling systems with adjustable cartridges for boring
90.93
Cutting tool data representation and exchange — Part 306: Creation and exchange of 3D models — Drills and countersinking tools for indexable inserts
90.93
Cutting tool data representation and exchange — Part 307: Creation and exchange of 3D models — End mills for indexable inserts
90.93
Cutting tool data representation and exchange — Part 308: Creation and exchange of 3D models — Milling cutters with arbor hole for indexable inserts
90.93
Cutting tool data representation and exchange — Part 309: Creation and exchange of 3D models — Tool holders for indexable inserts
90.93
Cutting tool data representation and exchange — Part 310: Creation and exchange of 3D models — Turning tools with carbide tips
90.93
Cutting tool data representation and exchange — Part 311: Creation and exchange of 3D models — Solid reamers
90.93
Cutting tool data representation and exchange — Part 312: Creation and exchange of 3D models — Reamers for indexable inserts
90.93
Cutting tool data representation and exchange — Part 313: Creation and exchange of 3D models — Burrs
90.93
Cutting tool data representation and exchange — Part 314: Creation and exchange of 3D models — Cartridges for indexable inserts
90.93
Cutting tool data representation and exchange — Part 315: Creation and exchange of 3D models — Modelling of machine operated feed out tools
90.93
Cutting tool data representation and exchange — Part 401: Creation and exchange of 3D models — Converting, extending and reducing adaptive items
90.93
Cutting tool data representation and exchange — Part 403: Creation and exchange of 3D models — Modelling of driven tool units
90.93
Cutting tool data representation and exchange — Part 405: Creation and exchange of 3D models — Collets
90.93
Cutting tool data representation and exchange — Part 406: Creation and exchange of 3D models — Modelling of connection interface
90.93
Collets with 8 degree setting angle for tool shanks — Collets, nuts and fitting dimensions
95.99
Balancing of rotating tools and tool systems
90.93
Modular taper interface with ball track system — Part 1: Dimensions and designation of shanks
95.99
Modular taper interface with ball track system — Part 1: Dimensions and designation of shanks
90.93
Polygonal taper interface with flange contact surface — Part 1: Dimensions and designation of shanks
95.99
Polygonal taper interface with flange contact surface — Part 2: Dimensions and designation of receivers
95.99

По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.