Фильтр :
Стандарт и/или проект | Этап | ТК |
---|---|---|
Timber Structures – Determination of characteristic values of sawn timber from tests on Small Clear Wood Specimens
|
30.99 | ISO/TC 165 |
Bamboo structures — Engineered bamboo products — Test methods for determination of mechanical properties using small size specimens
|
60.60 | ISO/TC 165 |
Timber structures — Joints made with mechanical fasteners — General principles for the determination of strength and deformation characteristics
|
90.93 | ISO/TC 165 |
Bamboo structures — Glued laminated bamboo — Product specifications
|
50.20 | ISO/TC 165 |
Solid timber in structural sizes — Determination of some physical and mechanical properties
|
95.99 | ISO/TC 165 |
Timber structures — Glued laminated timber — Test methods for determination of physical and mechanical properties
|
95.99 | ISO/TC 165 |
Timber structures — Glued laminated timber — Test methods for determination of physical and mechanical properties
|
90.93 | ISO/TC 165 |
Timber structures — Testing of unilateral punched metal plate fasterners and joints
|
95.99 | ISO/TC 165 |
Timber structures — Testing of punched metal plate fasteners and joints
|
90.93 | ISO/TC 165 |
Timber structures — Testing of joints made with mechanical fasteners — Requirements for wood density
|
95.99 | ISO/TC 165 |
Timber structures — Testing of joints made with mechanical fasteners — Requirements for wood density
|
95.99 | ISO/TC 165 |
Timber structures — Testing of joints made with mechanical fasteners — Requirements for timber density
|
60.60 | ISO/TC 165 |
Wood - Determination of nail and screw holding power under axial load application
|
90.93 | ISO/TC 165 |
Timber structures — Solid timber finger-jointing — Production requirements
|
95.99 | ISO/TC 165 |
Timber — Finger joints — Minimum production requirements and testing methods
|
90.93 | ISO/TC 165 |
Timber structures — Dowel-type fasteners — Part 1: Determination of yield moment
|
90.93 | ISO/TC 165 |
Timber structures — Dowel-type fasteners — Part 2: Determination of embedding strength
|
90.93 | ISO/TC 165 |
Timber structures — Determination of characteristic values — Part 1: Basic requirements
|
90.93 | ISO/TC 165 |
Timber structures — Determination of characteristic values — Part 2: Sawn timber
|
90.93 | ISO/TC 165 |
Timber structures — Determination of characteristic values — Part 3: Glued laminated timber
|
90.93 | ISO/TC 165 |
Timber structures — Determination of characteristic values — Part 4: Engineered wood products
|
90.93 | ISO/TC 165 |
Timber structures — Determination of characteristic values — Part 5: Mechanical connections
|
90.93 | ISO/TC 165 |
Timber structures — Determination of characteristic values — Part 6: Large components and assemblies
|
90.93 | ISO/TC 165 |
Timber structures — Glued laminated timber — Component performance and production requirements
|
95.99 | ISO/TC 165 |
Timber structures — Glued laminated timber — Component performance requirements
|
90.93 | ISO/TC 165 |
Timber structures — Glued laminated timber — Method of test for shear strength of glue lines
|
90.93 | ISO/TC 165 |
Timber structures — Glued laminated timber — Methods of test for glue-line delamination
|
90.20 | ISO/TC 165 |
Light-frame timber construction — Comparison of four national design documents
|
90.93 | ISO/TC 165 |
Structural timber — Characteristic values of strength-graded timber — Sampling, full-size testing and evaluation
|
95.99 | ISO/TC 165 |
Timber structures — Strength graded timber — Test methods for structural properties
|
90.93 | ISO/TC 165 |
Timber poles — Basic requirements and test methods
|
90.93 | ISO/TC 165 |
Timber structures — Uniform, concentrated static and concentrated impact loads on wood-based roof and floor panel assemblies — Test methods
|
90.60 | ISO/TC 165 |
Timber structures — Wood-based panels — Test methods for structural properties
|
90.93 | ISO/TC 165 |
Timber structures — Structural classification for sawn timber
|
90.93 | ISO/TC 165 |
Timber structures — Joints made with mechanical fasteners — Quasi-static reversed-cyclic test method
|
90.93 | ISO/TC 165 |
Timber structures — Cross laminated timber — Part 1: Component performance, production requirements and certification scheme
|
90.60 | ISO/TC 165 |
Timber structures — Test methods — Torsional resistance of driving in screws
|
90.93 | ISO/TC 165 |
Timber structures — Finger-jointed timber — Manufacturing and production requirements
|
90.93 | ISO/TC 165 |
Timber structures — Review of design standards
|
90.93 | ISO/TC 165 |
Timber structures — Test methods — Floor vibration performance
|
90.93 | ISO/TC 165 |
Timber structures — Structural insulated panel roof construction — Test methods
|
90.93 | ISO/TC 165 |
Timber structures — Test method — Static load tests for horizontal diaphragms including floors and roofs
|
90.93 | ISO/TC 165 |
Timber structures — Joist hangers — Test methods
|
90.93 | ISO/TC 165 |
Timber structures — Glued laminated timber — Assignment of glued laminated timber characteristic values from laminate properties
|
90.93 | ISO/TC 165 |
Bamboo structures — Grading of bamboo culms — Basic principles and procedures
|
90.93 | ISO/TC 165 |
Timber structures — Glued laminated timber — Face and edge joint cleavage test
|
95.99 | ISO/TC 165 |
Timber structures — Glued laminated timber — Face and edge joint cleavage test
|
60.60 | ISO/TC 165 |
Timber structures — Bond performance of adhesives — Part 1: Basic requirements
|
90.20 | ISO/TC 165 |
Timber structures — Bond performance of adhesives — Part 2: Additional requirements
|
90.93 | ISO/TC 165 |
Timber structures — Bond performance of adhesives — Part 3: Use of alternative species for bond tests
|
90.93 | ISO/TC 165 |
Timber structures — Vibration performance criteria for timber floors
|
90.93 | ISO/TC 165 |
Timber structures — Timber connections and assemblies — Determination of yield and ultimate characteristics and ductility from test data
|
60.60 | ISO/TC 165 |
Timber structures - Static and cyclic lateral load test methods for shear walls
|
90.93 | ISO/TC 165 |
Bamboo — Structural design
|
95.99 | ISO/TC 165 |
Bamboo structures — Bamboo culms — Structural design
|
60.60 | ISO/TC 165 |
Timber structures — Bending strength of I-beams
— Part 1: Testing, evaluation and characterization
|
90.93 | ISO/TC 165 |
Timber structures - Bending applications of I-beams — Part 2: Component performance and manufacturing requirements
|
95.99 | ISO/TC 165 |
Timber structures — Bending applications of I-beams — Part 2: Component performance and manufacturing requirements
|
60.60 | ISO/TC 165 |
Timber structures — Laminated veneer lumber — Structural properties
|
95.99 | ISO/TC 165 |
Timber structures — Laminated veneer lumber — Structural properties
|
60.60 | ISO/TC 165 |
Timber structures — Structural insulated panel walls — Test methods
|
90.20 | ISO/TC 165 |
Bamboo structures — Engineered bamboo products — Test methods for determination of physical and mechanical properties
|
60.60 | ISO/TC 165 |
Timber structures — Methods of test for evaluation of long-term performance — Part 1: Wood-based products in bending
|
60.60 | ISO/TC 165 |
Timber structures — Design method for vibrational serviceability of timber floors
|
60.60 | ISO/TC 165 |
По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.