Фильтр :
Стандарт и/или проект | Этап | ТК |
---|---|---|
Plastics — Phenolic mouldings — Determination of acetone-soluble matter
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Determination of apparent density of material that can be poured from a specified funnel
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Determination of apparent density of material that can be poured from a specified funnel
|
60.60 | ISO/TC 61/SC 12 |
Plastics — Determination of apparent density of moulding material that cannot be poured from a specified funnel
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Determination of apparent density of moulding material that cannot be poured from a specified funnel
|
60.60 | ISO/TC 61/SC 12 |
Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite
|
90.60 | ISO/TC 61/SC 2 |
Plastics — Determination of temperature of deflection under load — Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of temperature of deflection under load — Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
|
90.92 | ISO/TC 61/SC 2 |
Plastics — Determination of temperature of deflection under load — Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
|
40.60 | ISO/TC 61/SC 2 |
Plastics — Phenol-formaldehyde mouldings — Determination of free phenols — Iodometric method
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Phenol-formaldehyde mouldings — Determination of free ammonia and ammonium compounds — Colorimetric comparison method
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Phenol-formaldehyde mouldings — Detection of free ammonia
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Compression moulding test specimens of thermosetting materials
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Compression moulding of test specimens of thermosetting materials
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Compression moulding of test specimens of thermosetting materials
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Phenolic moulding materials — Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state)
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Phenolic moulding materials — Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state)
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Unsaturated polyester resins — Determination of reactivity at 80 degrees C (conventional method)
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Phenolic moulding materials — Specification
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Phenolic moulding materials — Specification
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 5: Thermoplastic polyester (TP) homopolymers and copolymers
|
90.60 | ISO/TC 61/SC 9 |
Plastics — Aminoplastic moulding materials — Specification
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Aminoplastic moulding materials — Specification
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Unsaturated polyester resins — Determination of acid value
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Unsaturated polyester resins — Determination of partial acid value and total acid value
|
95.99 | ISO/TC 61/SC 12 |
Plastics (polyester resins) and paints and varnishes (binders) — Determination of partial acid value and total acid value
|
90.93 | ISO/TC 61/SC 12 |
Ebonite — Determination of tensile strength and elongation at break
|
95.99 | ISO/TC 45/SC 2 |
Ebonite — Determination of cross-breaking strength
|
95.99 | ISO/TC 45/SC 2 |
Plastics — Unsaturated polyester resins — Measurement of gel time at 25 degrees C
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Unsaturated polyester resins — Measurement of gel time at 25 degrees C
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Unsaturated-polyester resins — Measurement of gel time at ambient temperature
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Unsaturated polyester resins — Determination of hydroxyl value
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Unsaturated polyester resins — Determination of hydroxyl value
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Thermosetting moulding materials — Determination of shrinkage
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Thermosetting moulding materials — Determination of shrinkage
|
90.93 | ISO/TC 61/SC 12 |
Ebonite — Determination of hardness by means of a durometer
|
95.99 | ISO/TC 45/SC 2 |
Plastics — Epoxide compounds — Determination of epoxide equivalent
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Epoxy compounds — Determination of epoxy equivalent
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Epoxy compounds — Determination of epoxy equivalent
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Polyester and epoxy casting resins — Determination of total volume shrinkage
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Unsaturated polyester and epoxy resins — Determination of overall volume shrinkage
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Unsaturated polyester and epoxy resins — Determination of overall volume shrinkage — Technical Corrigendum 1
|
60.60 | ISO/TC 61/SC 12 |
Plastics — Aminoplastic moulding materials — Determination of volatile matter
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Aminoplastic moulding materials — Determination of volatile matter
|
60.60 | ISO/TC 61/SC 12 |
Plastics — Unsaturated polyester resins — Part 1: Designation
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Unsaturated-polyester resins (UP-R) — Part 1: Designation system
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Unsaturated-polyester resins (UP-R) — Part 2: Preparation of test specimens and determination of properties
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Epoxide resins — Part 1: Designation
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Epoxy resins — Part 1: Designation
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Epoxy resins — Part 2: Preparation of test specimens and determination of properties
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Epoxy resins — Part 2: Preparation of test specimens and determination of properties
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Epoxy resins — Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins
|
90.93 | ISO/TC 61/SC 12 |
Thermosetting resin and UV curable resin — Determination of shrinkage by continuous measurement method
|
60.60 | ISO/TC 61/SC 12 |
Plastics — Epoxide resins and glycidyl esters - Determination of inorganic chlorine (Under revision ISO 11376)
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Epoxy resins and related materials — Determination of easily saponifiable chlorine
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Epoxy resins and related materials — Determination of easily saponifiable chlorine
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Hardeners and accelerators for epoxide resins — Part 1: Designation
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Hardeners and accelerators for epoxy resins — Part 1: Designation
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Melamine-formaldehyde mouldings — Determination of extractable formaldehyde
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Unsaturated polyesters and epoxide resins — Determination of total chlorine content
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Polyols for use in the production of polyurethanes — Determination of degree of unsaturation by using iodine method
|
60.60 | ISO/TC 61/SC 12 |
Plastics — Liquid epoxide resins — Determination of tendency to crystallize
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Liquid epoxy resins — Determination of tendency to crystallize
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Liquid epoxy resins — Determination of tendency to crystallize
|
90.20 | ISO/TC 61/SC 12 |
Plastics — Melamine/phenolic moulding materials — Specification
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Melamine/phenolic moulding materials — Specification
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Hardeners and accelerators for epoxide resins — Determination of free acid in acid anhydride
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Thermosetting moulding materials — Determination of transfer flow
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Phenolic resins — Basis for classification
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Liquid phenolic resins — Conventional determination of non-volatile matter
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Liquid phenolic resins — Conventional determination of non-volatile matter
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Phenolic resin powder — Determination of flow distance on a heated glass plate
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Phenolic resin powder — Determination of flow distance on a heated glass plate
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Phenolic resin powder — Determination of flow distance on a heated glass plate
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Phenolic resin powder — Sieve analysis using air-jet sieve apparatus
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Phenolic resins — Determination of residual phenol content by gas chromatography
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Phenolic resins — Determination of residual phenol content by gas chromatography
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Phenolic resins — Determination of residual phenol content by gas chromatography
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Phenolic resins — Determination of pH
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Phenolic resins — Determination of reactivity on a B-transformation test plate
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Phenolic resins — Determination of reactivity on a B-transformation test plate
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Phenolic resins — Determination of reactivity on a B-transformation test plate
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Phenolic resins — Determination of hexamethylenetetramine content
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Phenolic resins — Determination of hexamethylenetetramine content — Kjeldahl method and perchloric acid method
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Phenolic resins — Determination of hexamethylenetetramine content — Kjeldahl method, perchloric acid method and hydrochloric acid method
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Liquid phenolic resins — Determination of water miscibility
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Liquid phenolic resins — Determination of water miscibility
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Basic materials for polyurethanes — Pure isocyanates — Analysis of isocyanate groups
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Phenolic resins in the liquid state or in solution — Determination of viscosity
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Basic materials for polyurethanes — Determination of the amounts of 2,4- and 2,6-isomers in toluenediisocyanate by infrared spectroscopy
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Phenolic resins — Determination of the gel time at a given temperature using automatic apparatus
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Phenolic resins — Determination of the gel time of resols under specific conditions using automatic apparatus
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Phenolic resins — Determination of free formaldehyde content
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Phenolic resins — Determination of free-formaldehyde content — Hydroxylamine hydrochloride method
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Amine epoxide hardeners — Determination of primary, secondary and tertiary amine group nitrogen content
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Phenolic resins — Determination of reactivity of resols under acid conditions
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Phenolic resins — Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Phenolic resins — Determination of electrical conductivity of resin extracts
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Phenolic resins — Determination of electrical conductivity of resin extracts — Technical Corrigendum 1
|
60.60 | ISO/TC 61/SC 12 |
Plastics — Phenolic resins — Definitions and test methods
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Phenolic resins — Classification and test methods
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) — Part 1: General principles and moulding of multipurpose test specimens
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) — Part 2: Small plates
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Thermosetting moulding materials — Injection moulding of multipurpose test specimens
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Thermosetting moulding materials — Evaluation of short-term performance at elevated temperatures
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Epoxy resins and glycidyl esters — Determination of inorganic chlorine
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Phenolic resins — Separation by liquid chromatography
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Condensation resins — Determination of free formaldehyde
|
95.99 | ISO/TC 61/SC 12 |
Phenolic, amino and condensation resins — Determination of free-formaldehyde content
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Phenolic resins — Determination of heats and temperatures of reaction by differential scanning calorimetry
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Epoxy resins and related materials — Determination of total saponifiable chlorine
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Epoxy resins — Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Epoxy resins — Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry (DSC)
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Phenolic powder moulding compounds (PF-PMCs) — Part 1: Designation system and basis for specifications
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Phenolic powder moulding compounds (PF-PMCs) — Part 2: Preparation of test specimens and determination of properties
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Phenolic powder moulding compounds (PF-PMCs) — Part 3: Requirements for selected moulding compounds
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) — Part 1: Designation system and basis for specifications
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) — Part 2: Preparation of test specimens and determination of properties
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) — Part 3: Requirements for selected moulding compounds
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Melamine-formaldehyde powder moulding compounds (MF-PMCs) — Part 1: Designation system and basis for specifications
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Melamine-formaldehyde powder moulding compounds (MF-PMCs) — Part 2: Preparation of test specimens and determination of properties
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Melamine-formaldehyde powder moulding compounds (MF-PMCs) — Part 3: Requirements for selected moulding compounds
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Melamine/phenolic powder moulding compounds (MP-PMCs) — Part 1: Designation system and basis for specifications
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Melamine/phenolic powder moulding compounds (MP-PMCs) — Part 2: Preparation of test specimens and determination of properties
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Melamine/phenolic powder moulding compounds (MP-PMCs) — Part 3: Requirements for selected moulding compounds
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Unsaturated-polyester powder moulding compounds (UP-PMCs) — Part 1: Designation system and basis for specifications
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Unsaturated-polyester powder moulding compounds (UP-PMCs) — Part 2: Preparation of test specimens and determination of properties
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Unsaturated-polyester powder moulding compounds (UP-PMCs) — Part 3: Requirements for selected moulding compounds
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Unsaturated-polyester resins — Determination of reactivity at 130 degrees C
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Phenol-formaldehyde mouldings — Determination of free ammonia and ammonium compounds — Indophenol method
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Polyurethane raw materials — Determination of isocyanate content
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Polyurethane raw materials — Determination of isocyanate content — Technical Corrigendum 1
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Polyurethane raw materials — Determination of isocyanate content
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Polyurethane raw materials — Determination of isocyanate content — Amendment 1: Acceptable variations in the procedure for method B
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Polyurethane raw materials — Determination of isocyanate content
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Polyols for use in the production of polyurethane — Determination of water content
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Polyols for use in the production of polyurethane — Determination of water content
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Polyols for use in the production of polyurethanes — Determination of water content
|
60.60 | ISO/TC 61/SC 12 |
Plastics — Aromatic isocyanates for use in the production of polyurethane — Determination of acidity
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Aromatic isocyanates for use in the production of polyurethane — Determination of acidity — Amendment 1
|
60.60 | ISO/TC 61/SC 12 |
Plastics — Polyols for use in the production of polyurethane — Determination of basicity
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Polyols for use in the production of polyurethanes — Determination of basicity
|
60.60 | ISO/TC 61/SC 12 |
Plastics — Polyols for use in the production of polyurethane — Determination of hydroxyl number
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Polyols for use in the production of polyurethane — Determination of hydroxyl number — Technical Corrigendum 1
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Polyols for use in the production of polyurethane — Determination of hydroxyl number
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Polyols for use in the production of polyurethanes — Determination of hydroxyl number
|
60.60 | ISO/TC 61/SC 12 |
Plastics — Aromatic isocyanates for use in the production of polyurethanes — Determination of hydrolysable chlorine
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Aromatic isocyanates for use in the production of polyurethanes — Determination of hydrolysable chlorine
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Polyols for use in the production of polyurethanes — Determination of hydroxyl number by NIR spectroscopy
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Polyols for use in the production of polyurethanes — Determination of hydroxyl number by NIR spectroscopy
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Aromatic isocyanates for use in the production of polyurethanes — Determination of the isomer ratio in toluenediisocyanate
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Aromatic isocyanates for use in the production of polyurethanes — Determination of the isomer ratio in toluenediisocyanate
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Aromatic isocyanates for use in the production of polyurethanes — Determination of the isomer ratio in toluenediisocyanate (TDI)
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Epoxy powder moulding compounds (EP-PMCs) — Part 1: Designation system and basis for specifications
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Epoxy powder moulding compounds (EP-PMCs) — Part 2: Preparation of test specimens and determination of properties
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Epoxy powder moulding compounds (EP-PMCs) — Part 3: Requirements for selected moulding compounds
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Polyols for use in the production of polyurethane — Determination of degree of unsaturation by microtitration
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Polyols for use in the production of polyurethanes — Determination of degree of unsaturation by microtitration
|
60.60 | ISO/TC 61/SC 12 |
Plastics — Epoxy resins — Test methods
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Epoxy resins — Test methods
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Determination of tensile properties at high strain rates
|
90.93 | ISO/TC 61/SC 2 |
Plastics — Epoxy resins — Determination of degree of crosslinking of crosslinked epoxy resins by Fourier Transform Infrared (FTIR) Spectroscopy
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Epoxy resins — Determination of 1,2-glycol content
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Epoxy resins — Determination of 1,2-glycol content
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Polymer polyols for use in the production of polyurethane — Determination of the residual acrylonitrile and styrene monomer content by gas chromatography
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Polymer polyols for use in the production of polyurethanes — Determination of the residual acrylonitrile and styrene monomer content by gas chromatography
|
60.60 | ISO/TC 61/SC 12 |
Plastics — Epoxy resins — Determination of electrical conductivity of aqueous resin extracts
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Epoxy resins — Determination of chlorine content — Part 1: Inorganic chlorine
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Epoxy resins — Determination of chlorine content — Part 1: Inorganic chlorine
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Epoxy resins — Determination of chlorine content — Part 2: Easily saponifiable chlorine
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Epoxy resins — Determination of chlorine content — Part 2: Easily saponifiable chlorine
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Epoxy resins — Determination of chlorine content — Part 3: Total chlorine
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Epoxy resins — Determination of chlorine content — Part 3: Total chlorine
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Polyols for use in the production of polyurethanes — Determination of basicity (total amine value), expressed as percent nitrogen
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Polyols for use in the production of polyurethanes — Determination of basicity (total amine value), expressed as percent nitrogen
|
90.93 | ISO/TC 61/SC 12 |
Plastics — Aromatic isocyanates for use in the production of polyurethanes — Determination of total chlorine
|
95.99 | ISO/TC 61/SC 12 |
Plastics — Aromatic isocyanates for use in the production of polyurethanes — Determination of total chlorine
|
90.92 | ISO/TC 61/SC 12 |
По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.