Фильтр :
Стандарт и/или проект | Этап | ТК |
---|---|---|
Rubber hose for grit blasting |
95.99 | ISO/TC 45/SC 1 |
Rubber hoses for sand and grit blasting — Specification |
95.99 | ISO/TC 45/SC 1 |
Rubber hoses for sand and grit blasting — Specification |
95.99 | ISO/TC 45/SC 1 |
Rubber hoses and hose assemblies for sand and grit blasting — Specification |
60.60 | ISO/TC 45/SC 1 |
Paints and varnishes — Terms and definitions for coating materials — Part 3: Surface preparation and methods of application |
95.99 | ISO/TC 35 |
Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings — Supplement: Representative photographic examples of the change of appearance imparted to steel when blast-cleaned with different abrasives |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings |
90.92 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings |
30.20 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings |
90.93 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 3: Preparation grades of welds, edges and other areas with surface imperfections |
30.20 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 3: Preparation grades of welds, cut edges and other areas with surface imperfections |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 3: Preparation grades of welds, edges and other areas with surface imperfections |
90.92 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 4: Initial surface conditions, preparation grades and flash rust grades in connection with high-pressure water jetting |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 4: Initial surface conditions, preparation grades and flash rust grades in connection with water jetting |
60.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 1: Field test for soluble iron corrosion products |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 2: Laboratory determination of chloride on cleaned surfaces |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 2: Laboratory determination of chloride on cleaned surfaces |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 2: Laboratory determination of chloride on cleaned surfaces |
90.93 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) |
90.93 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 4: Guidance on the estimation of the probability of condensation prior to paint application |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 4: Guidance on the estimation of the probability of condensation prior to paint application |
90.93 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection tube method) |
90.92 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 6: Extraction of soluble contaminants for analysis — The Bresle method |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 6: Extraction of soluble contaminants for analysis — The Bresle method |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 6: Extraction of water soluble contaminants for analysis (Bresle method) |
60.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 8: Field method for the refractometric determination of moisture |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 9: Field method for the conductometric determination of water-soluble salts |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 9: Field method for the conductometric determination of water-soluble salts |
60.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 10: Field method for the titrimetric determination of water-soluble chloride |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 11: Field method for the turbidimetric determination of water-soluble sulfate |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 12: Field method for the titrimetric determination of water-soluble ferrous ions |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 15: Extraction of soluble contaminants for analysis by acid extraction |
60.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces |
90.93 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel — Comparator procedure |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel — Comparator procedure |
90.93 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 3: Method for the calibration of ISO surface profile comparators and for the determination of surface profile — Focusing microscope procedure |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 3: Method for the calibration of ISO surface profile comparators and for the determination of surface profile — Focusing microscope procedure |
90.93 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile — Stylus instrument procedure |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile — Stylus instrument procedure |
90.93 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 5: Replica tape method for the determination of the surface profile |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 5: Replica tape method for the determination of the surface profile |
90.93 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Surface preparation methods — Part 1: General principles |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Surface preparation methods — Part 1: General principles |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Surface preparation methods — Part 1: General principles |
60.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Surface preparation methods — Part 2: Abrasive blast-cleaning |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Surface preparation methods — Part 2: Abrasive blast-cleaning |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Surface preparation methods — Part 2: Abrasive blast-cleaning |
60.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Surface preparation methods — Part 3: Hand- and power-tool cleaning |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Surface preparation methods — Part 3: Hand- and power-tool cleaning |
90.20 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Surface preparation methods — Part 4: Acid pickling |
60.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Surface preparation methods — Part 5: Water Jetting (Water Jet Cleaning) |
40.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for metallic blast-cleaning abrasives — Part 1: General introduction and classification |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for metallic blast-cleaning abrasives — Part 1: General introduction and classification |
90.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for metallic blast-cleaning abrasives — Part 2: Chilled-iron grit |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for metallic blast-cleaning abrasives — Part 2: Chilled-iron grit |
90.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for metallic blast-cleaning abrasives — Part 3: High-carbon cast-steel shot and grit |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for metallic blast-cleaning abrasives — Part 3: High-carbon cast-steel shot and grit |
90.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for metallic blast-cleaning abrasives — Part 4: Low-carbon cast-steel shot |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for metallic blast-cleaning abrasives — Part 4: Low-carbon cast-steel shot |
90.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for metallic blast-cleaning abrasives — Part 5: Cut steel wire |
60.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 1: Sampling |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 1: Sampling |
90.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 2: Determination of particle size distribution |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 2: Determination of particle size distribution |
90.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 3: Determination of hardness |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 3: Determination of hardness |
90.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 4: Determination of apparent density |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 4: Determination of apparent density |
90.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 5: Determination of percentage defective particles and of microstructure |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 5: Determination of percentage defective particles and of microstructure |
90.92 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 6: Determination of foreign matter |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 6: Determination of foreign matter |
90.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 7: Determination of moisture |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 7: Determination of moisture |
90.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 9: Wear testing and performance |
60.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 1: General introduction and classification |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 1: General introduction and classification — Technical Corrigendum 1 |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 1: General introduction and classification — Technical Corrigendum 2 |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 1: General introduction and classification |
90.92 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 3: Copper refinery slag |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 3: Copper refinery slag |
90.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 4: Coal furnace slag |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 4: Coal furnace slag |
90.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 5: Nickel refinery slag |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 5: Nickel slag |
90.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 6: Iron furnace slag |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 6: Iron and steel slags |
90.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 7: Fused aluminium oxide |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 7: Fused aluminium oxide — Technical Corrigendum 1 |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 7: Fused aluminium oxide |
90.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 8: Olivine sand |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 8: Olivine |
90.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 9: Staurolite |
90.93 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 10: Almandite garnet |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 10: Almandite garnet |
90.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 11: Volcanic Lava |
30.20 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 1: Sampling |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 1: Sampling |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 1: Sampling |
60.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 2: Determination of particle size distribution |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 2: Determination of particle size distribution |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 2: Determination of particle size distribution |
60.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 3: Determination of apparent density |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 3: Determination of apparent density |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 3: Determination of apparent density |
60.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 4: Assessment of hardness by a glass slide test |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 4: Assessment of hardness by a glass slide test |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 4: Assessment of hardness by a glass slide test |
60.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 5: Determination of moisture |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 5: Determination of moisture |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 5: Determination of moisture |
60.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 6: Determination of water-soluble contaminants by conductivity measurement |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 6: Determination of water-soluble contaminants by conductivity measurement |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 6: Determination of water-soluble contaminants by conductivity measurement |
60.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 7: Determination of water-soluble chlorides |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 7: Determination of water-soluble chlorides |
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 7: Determination of water-soluble chlorides |
60.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 8: Field determination of water-soluble chlorides |
60.60 | ISO/TC 35/SC 12 |
Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 4: Types of surface and surface preparation |
95.99 | ISO/TC 35/SC 14 |
Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 4: Types of surface and surface preparation |
90.93 | ISO/TC 35/SC 14 |
Preparation of steel substrates before application of paints and related products — Collected information on the effect of levels of water-soluble salt contamination |
90.93 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Analytical colorimetry method to support visual assessment of surface preparation grades |
60.60 | ISO/TC 35/SC 12 |
Foundry machinery — Vocabulary — Part 4: Abrasive blasting machines and other equipment related to cleaning and finishing for casting |
60.60 | ISO/TC 306 |
По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.