Фильтр :
Стандарт и/или проект | Этап | ТК |
---|---|---|
Guide for addressing accessibility in standards
|
90.93 | ISO/TMBG |
Geometrical orientation and directions of movements
|
95.99 | ISO/TC 159/SC 4 |
Spatial orientation and direction of movement — Ergonomic requirements
|
90.60 | ISO/TC 159/SC 4 |
Information technology — User interfaces — Evaluating usability of natural user interfaces
|
50.20 | ISO/IEC JTC 1/SC 35 |
Multivariate analysis tools and techniques for synthesis with anthropometric data
|
30.60 | ISO/TC 159/SC 3 |
Assistive products — Accessibility guidelines and requirements to survey the needs of persons with sensory disabilities for assistive products and services
|
60.60 | ISO/TC 173/SC 7 |
Ergonomic principles in the design of work systems
|
95.99 | ISO/TC 159 |
Ergonomic principles in the design of work systems
|
95.99 | ISO/TC 159/SC 1 |
Ergonomics principles in the design of work systems
|
90.93 | ISO/TC 159/SC 1 |
Ergonomics — The application of ISO/TR 12295, ISO 11226, the ISO 11228 series and ISO/TR 23476 in the construction sector (civil construction)
|
60.60 | ISO/TC 159/SC 3 |
Hot environments — Estimation of the heat stress on working man, based on the WBGT-index (wet bulb globe temperature)
|
95.99 | ISO/TC 159/SC 5 |
Hot environments — Estimation of the heat stress on working man, based on the WBGT-index (wet bulb globe temperature)
|
95.99 | ISO/TC 159/SC 5 |
Ergonomics of the thermal environment — Assessment of heat stress using the WBGT (wet bulb globe temperature) index
|
90.60 | ISO/TC 159/SC 5 |
Basic human body measurements for technological design — Part 1: Body measurement definitions and landmarks
|
95.99 | ISO/TC 159/SC 3 |
Basic human body measurements for technological design — Part 1: Body measurement definitions and landmarks
|
90.93 | ISO/TC 159/SC 3 |
Basic human body measurements for technological design — Part 2: Statistical summaries of body measurements from national populations
|
95.99 | ISO/TC 159/SC 3 |
Basic human body measurements for technological design — Part 2: Statistical summaries of body measurements from national populations — Amendment 1
|
95.99 | ISO/TC 159/SC 3 |
Basic human body measurements for technological design — Part 2: Statistical summaries of body measurements from national populations
|
60.60 | ISO/TC 159/SC 3 |
Basic human body measurements for technological design — Part 3: Worldwide and regional design ranges for use in product standards
|
90.93 | ISO/TC 159/SC 3 |
Basic human body measurements for technological design — Part 4: Expected performance of skilled anthropometrists
|
60.60 | ISO/TC 159/SC 3 |
Basic human body measurements for technological design
|
95.99 | ISO/TC 159/SC 3 |
Thermal environments — Instruments and methods for measuring physical quantities
|
95.99 | ISO/TC 159/SC 5 |
Ergonomics of the thermal environment — Instruments for measuring physical quantities
|
90.92 | ISO/TC 159/SC 5 |
Ergonomics of the thermal environment — Instruments for measuring and monitoring physical quantities
|
40.99 | ISO/TC 159/SC 5 |
Moderate thermal environments — Determination of the PMV and PPD indices and specification of the conditions for thermal comfort
|
95.99 | ISO/TC 159/SC 5 |
Moderate thermal environments — Determination of the PMV and PPD indices and specification of the conditions for thermal comfort
|
95.99 | ISO/TC 159/SC 5 |
Ergonomics of the thermal environment — Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria
|
90.92 | ISO/TC 159/SC 5 |
Ergonomics of the thermal environment — Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria
|
40.99 | ISO/TC 159/SC 5 |
Danger signals for work places — Auditory danger signals
|
95.99 | ISO/TC 159/SC 5 |
Ergonomics — Danger signals for public and work areas — Auditory danger signals
|
90.93 | ISO/TC 159/SC 5 |
Hot environments — Analytical determination and interpretation of thermal stress using calculation of required sweat rate
|
95.99 | ISO/TC 159/SC 5 |
Ergonomics of the thermal environment — Analytical determination and interpretation of heat stress using calculation of the predicted heat strain
|
95.99 | ISO/TC 159/SC 5 |
Ergonomics of the thermal environment — Analytical determination and interpretation of heat stress using calculation of the predicted heat strain
|
60.60 | ISO/TC 159/SC 5 |
Ergonomics of the thermal environment — Management of working conditions in hot environments
|
60.60 | ISO/TC 159/SC 5 |
Road vehicles — Box task and detection response task to measure visual-manual and cognitive demand
|
40.00 | ISO/TC 22/SC 39 |
Road vehicles — Ergonomic aspects of human vehicle interactions — Taxonomy for the classification of adaptive interactive vehicle systems
|
50.20 | ISO/TC 22/SC 39 |
Light and lighting — Lighting of work places — Part 1: Indoor
|
40.60 | ISO/TC 274 |
Lighting of work places — Part 1: Indoor
|
90.92 | ISO/TC 274 |
Lighting of work places — Part 3: Lighting requirements for safety and security of outdoor work places
|
95.99 | ISO/TC 274 |
Lighting of work places — Part 3: Lighting requirements for safety and security of outdoor work places
|
90.93 | ISO/TC 274 |
Principles of visual ergonomics — The lighting of indoor work systems
|
95.99 | ISO/TC 159/SC 5 |
Lighting of work places — Part 1: Indoor — Technical Corrigendum 1
|
60.60 | ISO/TC 274 |
Ergonomics — Determination of metabolic heat production
|
95.99 | ISO/TC 159/SC 5 |
Ergonomics of the thermal environment — Determination of metabolic rate
|
95.99 | ISO/TC 159/SC 5 |
Ergonomics of the thermal environment — Determination of metabolic rate
|
60.60 | ISO/TC 159/SC 5 |
Ergonomic requirements for office work with visual display terminals (VDTs) — Part 1: General introduction
|
95.99 | ISO/TC 159/SC 4 |
Ergonomic requirements for office work with visual display terminals (VDTs) — Part 1: General introduction
|
90.93 | ISO/TC 159/SC 4 |
Ergonomic requirements for office work with visual display terminals (VDTs) — Part 1: General introduction — Amendment 1
|
60.60 | ISO/TC 159/SC 4 |
Ergonomic requirements for office work with visual display terminals (VDTs) — Part 2: Guidance on task requirements
|
90.93 | ISO/TC 159/SC 4 |
Ergonomic requirements for office work with visual display terminals (VDTs) — Part 3: Visual display requirements
|
95.99 | ISO/TC 159/SC 4 |
Ergonomic requirements for office work with visual display terminals (VDTs) — Part 3: Visual display requirements — Amendment 1: .
|
95.99 | ISO/TC 159/SC 4 |
Ergonomic requirements for office work with visual display terminals (VDTs) — Part 4: Keyboard requirements
|
95.99 | ISO/TC 159/SC 4 |
Ergonomic requirements for office work with visual display terminals (VDTs) — Part 4: Keyboard requirements — Technical Corrigendum 1
|
95.99 | ISO/TC 159/SC 4 |
Ergonomic requirements for office work with visual display terminals (VDTs) — Part 5: Workstation layout and postural requirements
|
90.92 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 5: Workstation layout and postural requirements
|
60.00 | ISO/TC 159/SC 4 |
Ergonomic requirements for office work with visual display terminals (VDTs) — Part 6: Guidance on the work environment
|
90.93 | ISO/TC 159/SC 4 |
Ergonomic requirements for office work with visual display terminals (VDTs) — Part 7: Requirements for display with reflections
|
95.99 | ISO/TC 159/SC 4 |
Ergonomic requirements for office work with visual display terminals (VDTs) — Part 8: Requirements for displayed colours
|
95.99 | ISO/TC 159/SC 4 |
Ergonomic requirements for office work with visual display terminals (VDTs) — Part 9: Requirements for non-keyboard input devices
|
95.99 | ISO/TC 159/SC 4 |
Ergonomic requirements for office work with visual display terminals (VDTs) — Part 10: Dialogue principles
|
95.99 | ISO/TC 159/SC 4 |
Ergonomic requirements for office work with visual display terminals (VDTs) — Part 11: Guidance on usability
|
95.99 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 11: Usability: Definitions and concepts
|
90.93 | ISO/TC 159/SC 4 |
Ergonomic requirements for office work with visual display terminals (VDTs) — Part 12: Presentation of information
|
95.99 | ISO/TC 159/SC 4 |
Ergonomic requirements for office work with visual display terminals (VDTs) — Part 13: User guidance
|
90.92 | ISO/TC 159/SC 4 |
Ergonomic requirements for office work with visual display terminals (VDTs) — Part 14: Menu dialogues
|
90.60 | ISO/TC 159/SC 4 |
Ergonomic requirements for office work with visual display terminals (VDTs) — Part 15: Command dialogues
|
95.99 | ISO/TC 159/SC 4 |
Ergonomic requirements for office work with visual display terminals (VDTs) — Part 16: Direct manipulation dialogues
|
95.99 | ISO/TC 159/SC 4 |
Ergonomic requirements for office work with visual display terminals (VDTs) — Part 17: Form filling dialogues
|
95.99 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 20: Accessibility guidelines for information/communication technology (ICT) equipment and services
|
95.99 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 20: An ergonomic approach to accessibility within the ISO 9241 series
|
60.60 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 100: Introduction to standards related to software ergonomics
|
95.99 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 100: Overview of ISO 9241 software ergonomic standards
|
60.60 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 110: Dialogue principles
|
95.99 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 110: Interaction principles
|
60.60 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 112: Principles for the presentation of information
|
90.92 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 112: Principles for the presentation of information
|
40.60 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 115: Guidance on conceptual design, user-system interaction design, user interface design and navigation design
|
60.60 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 125: Guidance on visual presentation of information
|
90.93 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 126: Guidance on the presentation of auditory information
|
90.93 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 129: Guidance on software individualization
|
90.93 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 143: Forms
|
90.60 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 151: Guidance on World Wide Web user interfaces
|
95.99 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 154: Interactive voice response (IVR) applications
|
90.93 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 161: Guidance on visual user-interface elements
|
90.92 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 161: Guidance on visual user-interface elements
|
40.60 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 171: Guidance on software accessibility
|
90.92 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 171: Guidance on software accessibility
|
30.20 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 210: Human-centred design for interactive systems
|
95.99 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 210: Human-centred design for interactive systems
|
90.20 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 220: Processes for enabling, executing and assessing human-centred design within organizations
|
90.60 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 221: Human-centred design process assessment model
|
60.60 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 300: Introduction to electronic visual display requirements
|
90.60 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 302: Terminology for electronic visual displays
|
90.60 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 303: Requirements for electronic visual displays
|
95.99 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 303: Requirements for electronic visual displays
|
90.93 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 304: User performance test methods for electronic visual displays
|
90.60 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 305: Optical laboratory test methods for electronic visual displays
|
90.60 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 306: Field assessment methods for electronic visual displays
|
95.99 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 306: Field assessment methods for electronic visual displays
|
90.93 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 307: Analysis and compliance test methods for electronic visual displays
|
90.60 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 308: Surface-conduction electron-emitter displays (SED)
|
95.99 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 309: Organic light-emitting diode (OLED) displays
|
90.93 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 310: Visibility, aesthetics and ergonomics of pixel defects
|
90.93 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 311: Application of ISO 9241-307: LCD screens for workstations
|
60.60 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 312: Readability of electrophoretic displays
|
60.60 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 313: Optical measurement methods for reflective displays
|
30.99 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 331: Optical characteristics of autostereoscopic displays
|
90.93 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 333: Stereoscopic displays using glasses
|
90.93 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 380: Survey result of HMD (Head-Mounted Displays) characteristics related to human-system interaction
|
60.60 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 391: Requirements, analysis and compliance test methods for the reduction of photosensitive seizures
|
90.93 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 392: Ergonomic recommendations for the reduction of visual fatigue from stereoscopic images
|
90.93 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 393: Structured literature review of visually induced motion sickness during watching electronic images
|
60.60 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 394: Ergonomic requirements for reducing undesirable biomedical effects of visually induced motion sickness during watching electronic images
|
60.60 | ISO/TC 159/SC 4 |
Ergonomics of human—system interaction — Part 400: Principles and requirements for physical input devices
|
90.93 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 410: Design criteria for physical input devices
|
90.93 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 410: Design criteria for physical input devices — Amendment 1
|
60.60 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 411: Evaluation methods for the design of physical input devices
|
90.93 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 420: Selection of physical input devices
|
90.93 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 430: Recommendations for the design of non-touch gestural input for the reduction of biomechanical stress
|
60.60 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 500: Ergonomic principles for the design and evaluation of environments of interactive systems
|
90.60 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 514: Guidance for the application of anthropometric data in the ISO 9241-500 series
|
60.60 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 610: Impact of light and lighting on users of interactive systems
|
60.60 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 620: The role of sound for users of interactive systems
|
60.60 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 810: Robotic, intelligent and autonomous systems
|
60.60 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 820: Ergonomic guidance on interactions in immersive environments, including augmented reality and virtual reality
|
60.60 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 910: Framework for tactile and haptic interaction
|
90.93 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 920: Guidance on tactile and haptic interactions
|
90.92 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 920: Tactile and haptic interactions
|
50.20 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 940: Evaluation of tactile and haptic interactions
|
90.93 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 960: Framework and guidance for gesture interactions
|
90.93 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 971: Accessibility of tactile/haptic interactive systems
|
60.60 | ISO/TC 159/SC 4 |
Ergonomic requirements for the design of displays and control actuators — Part 1: Human interactions with displays and control actuators
|
95.99 | ISO/TC 159/SC 4 |
Ergonomic requirements for the design of displays and control actuators — Part 2: Displays
|
95.99 | ISO/TC 159/SC 4 |
Ergonomic requirements for the design of displays and control actuators — Part 3: Control actuators
|
95.99 | ISO/TC 159/SC 4 |
Evaluation of thermal strain by physiological measurements
|
95.99 | ISO/TC 159/SC 5 |
Ergonomics — Evaluation of thermal strain by physiological measurements
|
90.93 | ISO/TC 159/SC 5 |
Ergonomics of the thermal environment — Estimation of the thermal insulation and evaporative resistance of a clothing ensemble
|
95.99 | ISO/TC 159/SC 5 |
Ergonomics of the thermal environment — Estimation of thermal insulation and water vapour resistance of a clothing ensemble
|
90.93 | ISO/TC 159/SC 5 |
Ergonomic assessment of speech communication — Part 1: Speech interference level and communication distances for persons with normal hearing capacity in direct communication (SIL method)
|
95.99 | ISO/TC 159/SC 5 |
Ergonomics — Assessment of speech communication
|
90.93 | ISO/TC 159/SC 5 |
Ergonomic principles related to mental workload — Part 1: General issues and concepts, terms and definitions
|
90.93 | ISO/TC 159/SC 1 |
Ergonomic principles related to mental workload — Part 2: Design principles
|
95.99 | ISO/TC 159/SC 1 |
Ergonomic principles related to mental workload — Part 2: Design principles
|
60.60 | ISO/TC 159/SC 1 |
Ergonomic principles related to mental workload — Part 3: Principles and requirements concerning methods for measuring and assessing mental workload
|
90.20 | ISO/TC 159/SC 1 |
Ergonomic principles related to mental work-load — General terms and definitions
|
95.99 | ISO/TC 159/SC 1 |
Ergonomics of the thermal environment — Assessment of the influence of the thermal environment using subjective judgement scales
|
95.99 | ISO/TC 159/SC 5 |
Ergonomics of the physical environment — Subjective judgement scales for assessing physical environments
|
90.20 | ISO/TC 159/SC 5 |
Ergonomic design of control centres — Part 1: Principles for the design of control centres
|
90.93 | ISO/TC 159/SC 4 |
Ergonomic design of control centres — Part 2: Principles for the arrangement of control suites
|
90.93 | ISO/TC 159/SC 4 |
Ergonomic design of control centres — Part 3: Control room layout
|
90.93 | ISO/TC 159/SC 4 |
Ergonomic design of control centres — Part 3: Control room layout — Technical Corrigendum 1
|
60.60 | ISO/TC 159/SC 4 |
Ergonomic design of control centres — Part 4: Layout and dimensions of workstations
|
95.99 | ISO/TC 159/SC 4 |
Ergonomic design of control centres — Part 4: Layout and dimensions of workstations
|
90.20 | ISO/TC 159/SC 4 |
Ergonomic design of control centres — Part 5: Displays and controls
|
90.93 | ISO/TC 159/SC 4 |
Ergonomic design of control centres — Part 6: Environmental requirements for control centres
|
90.20 | ISO/TC 159/SC 4 |
Ergonomic design of control centres — Part 7: Principles for the evaluation of control centres
|
90.93 | ISO/TC 159/SC 4 |
Ergonomic design of control centres — Part 10: Introduction to the control room design series of standards
|
60.60 | ISO/TC 159/SC 4 |
Ergonomics of the thermal environment — Determination and interpretation of cold stress when using required clothing insulation (IREQ) and local cooling effects
|
90.93 | ISO/TC 159/SC 5 |
Evaluation of cold environments — Determination of required clothing insulation (IREQ)
|
95.99 | ISO/TC 159/SC 5 |
Ergonomics — Evaluation of static working postures
|
90.60 | ISO/TC 159/SC 3 |
Ergonomics — Evaluation of static working postures — Technical Corrigendum 1
|
60.60 | ISO/TC 159/SC 3 |
Ergonomics — Manual handling — Part 1: Lifting and carrying
|
95.99 | ISO/TC 159/SC 3 |
Ergonomics — Manual handling — Part 1: Lifting, lowering and carrying
|
60.60 | ISO/TC 159/SC 3 |
Ergonomics — Manual handling — Part 2: Pushing and pulling
|
90.92 | ISO/TC 159/SC 3 |
Ergonomics — Manual handling — Part 2: Pushing and pulling — Amendment 1
|
60.60 | ISO/TC 159/SC 3 |
Ergonomics — Manual handling — Part 3: Handling of low loads at high frequency
|
90.92 | ISO/TC 159/SC 3 |
Ergonomics — Manual handling — Part 3: Repetitive movements and exertions of the upper limbs
|
30.60 | ISO/TC 159/SC 3 |
Ergonomics of the thermal environment — Principles and application of relevant International Standards
|
90.60 | ISO/TC 159/SC 5 |
Ergonomics — Visual danger signals — General requirements, design and testing
|
90.93 | ISO/TC 159/SC 5 |
Ergonomics — System of auditory and visual danger and information signals
|
90.20 | ISO/TC 159/SC 5 |
Ergonomics — Application document for International Standards on manual handling (ISO 11228-1, ISO 11228-2 and ISO 11228-3) and evaluation of static working postures (ISO 11226)
|
60.60 | ISO/TC 159/SC 3 |
Ergonomics — Manual handling of people in the healthcare sector
|
60.60 | ISO/TC 159/SC 3 |
Aircraft ground handling — Checked baggage — Part 3: Workstation ergonomics
|
60.60 | ISO/TC 20/SC 9 |
Ergonomics of the thermal environment — Medical supervision of individuals exposed to extreme hot or cold environments
|
90.93 | ISO/TC 159/SC 5 |
Ergonomic requirements for work with visual displays based on flat panels — Part 1: Introduction
|
95.99 | ISO/TC 159/SC 4 |
Ergonomic requirements for work with visual displays based on flat panels — Part 2: Ergonomic requirements for flat panel displays
|
95.99 | ISO/TC 159/SC 4 |
Human-centred design processes for interactive systems
|
95.99 | ISO/TC 159/SC 4 |
Ergonomics of the thermal environment — Vocabulary and symbols
|
90.93 | ISO/TC 159/SC 5 |
Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces
|
90.93 | ISO/TC 159/SC 5 |
Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 2: Human contact with surfaces at moderate temperature
|
90.60 | ISO/TC 159/SC 5 |
Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 3: Cold surfaces
|
90.93 | ISO/TC 159/SC 5 |
Road vehicles — Ergonomic aspects of transport information and control systems — Calibration tasks for methods which assess driver demand due to the use of in-vehicle systems
|
95.99 | ISO/TC 22/SC 39 |
Road vehicles — Ergonomic aspects of transport information and control systems — Calibration tasks for methods which assess driver demand due to the use of in-vehicle systems
|
90.93 | ISO/TC 22/SC 39 |
Ergonomics of the thermal environment — Application of International Standards to people with special requirements
|
95.99 | ISO/TC 159/SC 5 |
Ergonomics of the thermal environment — Evaluation of thermal environments in vehicles — Part 1: Principles and methods for assessment of thermal stress
|
30.99 | ISO/TC 159/SC 5 |
Ergonomics of the thermal environment — Evaluation of thermal environments in vehicles — Part 1: Principles and methods for assessment of thermal stress
|
90.92 | ISO/TC 159/SC 5 |
Ergonomics of the thermal environment — Evaluation of thermal environments in vehicles — Part 2: Determination of equivalent temperature
|
90.92 | ISO/TC 159/SC 5 |
Ergonomics of the thermal environment — Evaluation of thermal environments in vehicles — Part 2: Determination of equivalent temperature — Technical Corrigendum 1
|
60.60 | ISO/TC 159/SC 5 |
Ergonomics of the thermal environment — Evaluation of thermal environments in vehicles — Part 2: Determination of equivalent temperature
|
30.99 | ISO/TC 159/SC 5 |
Ergonomics of the thermal environment — Evaluation of thermal environments in vehicles — Part 3: Evaluation of thermal comfort using human subjects
|
90.92 | ISO/TC 159/SC 5 |
Ergonomics of the thermal environment — Evaluation of thermal environments in vehicles — Part 3: Evaluation of thermal comfort using human subjects
|
30.99 | ISO/TC 159/SC 5 |
Ergonomics of the thermal environment — Evaluation of thermal environments in vehicles — Part 4: Determination of the equivalent temperature by means of a numerical manikin
|
60.60 | ISO/TC 159/SC 5 |
Safety of machinery — Anthropometric requirements for the design of workstations at machinery
|
90.93 | ISO/TC 159/SC 3 |
Safety of machinery — Anthropometric requirements for the design of workstations at machinery — Technical Corrigendum 1
|
60.60 | ISO/TC 159/SC 3 |
Safety of machinery — Anthropometric requirements for the design of workstations at machinery — Technical Corrigendum 2
|
60.60 | ISO/TC 159/SC 3 |
Safety of machinery — Anthropometric requirements for the design of workstations for industries and services
|
40.98 | ISO/TC 159/SC 3 |
Software ergonomics for multimedia user interfaces — Part 1: Design principles and framework
|
95.99 | ISO/TC 159/SC 4 |
Software ergonomics for multimedia user interfaces — Part 2: Multimedia navigation and control
|
95.99 | ISO/TC 159/SC 4 |
Software ergonomics for multimedia user interfaces — Part 3: Media selection and combination
|
95.99 | ISO/TC 159/SC 4 |
Road vehicles — Ergonomic aspects of transport information and control systems — Dialogue management principles and compliance procedures
|
95.99 | ISO/TC 22/SC 39 |
Road vehicles — Ergonomic aspects of transportation and control systems — Dialogue management principles and compliance procedures
|
90.93 | ISO/TC 22/SC 39 |
Road vehicles — Ergonomic aspects of transport information and control systems — Specifications for in-vehicle auditory presentation
|
90.93 | ISO/TC 22/SC 39 |
Road vehicles — Measurement of driver visual behaviour with respect to transport information and control systems — Part 1: Definitions and parameters
|
95.99 | ISO/TC 22 |
Road vehicles — Measurement of driver visual behaviour with respect to transport information and control systems — Part 1: Definitions and parameters
|
95.99 | ISO/TC 22/SC 39 |
Road vehicles — Measurement of driver visual behaviour with respect to transport information and control systems — Part 2: Equipment and procedures
|
95.99 | ISO/TC 22 |
Road vehicles — Measurement of driver visual behaviour with respect to transport information and control systems — Part 2: Equipment and procedures
|
95.99 | ISO/TC 22/SC 39 |
Road vehicles — Measurement and analysis of driver visual behaviour with respect to transport information and control systems
|
60.60 | ISO/TC 22/SC 39 |
Road vehicles — Ergonomic aspects of transport information and control systems — Specifications and compliance procedures for in-vehicle visual presentation
|
95.99 | ISO/TC 22 |
Road vehicles — Ergonomic aspects of transport information and control systems — Specifications and test procedures for in-vehicle visual presentation
|
95.99 | ISO/TC 22/SC 39 |
Road vehicles — Ergonomic aspects of transport information and control systems — Specifications and test procedures for in-vehicle visual presentation
|
90.92 | ISO/TC 22/SC 39 |
Ergonomics of the thermal environment — Risk assessment strategy for the prevention of stress or discomfort in thermal working conditions
|
90.93 | ISO/TC 159/SC 5 |
Ergonomic design for the safety of machinery — Part 1: Principles for determining the dimensions required for openings for whole-body access into machinery
|
90.92 | ISO/TC 159/SC 3 |
Ergonomic design for the safety of machinery — Part 2: Principles for determining the dimensions required for access openings
|
90.92 | ISO/TC 159/SC 3 |
Ergonomic design for the safety of machinery — Part 3: Anthropometric data
|
90.92 | ISO/TC 159/SC 3 |
General requirements for establishing anthropometric databases
|
95.99 | ISO/TC 159/SC 3 |
General requirements for establishing anthropometric databases
|
95.99 | ISO/TC 159/SC 3 |
General requirements for establishing anthropometric databases
|
95.99 | ISO/TC 159/SC 3 |
General requirements for establishing anthropometric databases
|
60.60 | ISO/TC 159/SC 3 |
Ergonomics — Computer manikins and body templates — Part 1: General requirements
|
90.93 | ISO/TC 159/SC 3 |
Ergonomics — Computer manikins and body templates — Part 2: Verification of functions and validation of dimensions for computer manikin systems
|
90.93 | ISO/TC 159/SC 3 |
Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs
|
95.99 | ISO/TC 159/SC 3 |
Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs
|
60.60 | ISO/TC 159/SC 3 |
Ergonomics of the thermal environment — Cold workplaces — Risk assessment and management
|
90.93 | ISO/TC 159/SC 5 |
Ergonomics of human-system interaction — Guidance on accessibility for human-computer interfaces
|
95.99 | ISO/TC 159/SC 4 |
Road vehicles — Ergonomic requirements for the driver's workplace in line-service buses — Part 1: General description, basic requirements
|
95.99 | ISO/TC 22 |
Road vehicles — Ergonomic requirements for the driver's workplace in line-service buses — Part 1: General description, basic requirements
|
90.20 | ISO/TC 22/SC 39 |
Road vehicles — Ergonomic requirements for the driver's workplace in line-service buses — Part 2: Visibility
|
95.99 | ISO/TC 22 |
Road vehicles — Ergonomic requirements for the driver's workplace in line-service buses — Part 2: Visibility
|
90.60 | ISO/TC 22/SC 39 |
Road vehicles — Ergonomic requirements for the driver's workplace in line-service buses — Part 3: Information devices and controls
|
95.99 | ISO/TC 22 |
Road vehicles — Ergonomic requirements for the driver's workplace in line-service buses — Part 3: Information devices and controls
|
90.20 | ISO/TC 22/SC 39 |
Road vehicles — Ergonomic requirements for the driver's workplace in line-service buses — Part 4: Cabin environment
|
95.99 | ISO/TC 22 |
Road vehicles — Ergonomic requirements for the driver's workplace in line-service buses — Part 4: Cabin environment
|
90.20 | ISO/TC 22/SC 39 |
Road vehicles — Ergonomic aspects of in-vehicle presentation for transport information and control systems — Warning systems
|
60.60 | ISO/TC 22/SC 39 |
Road vehicles — Ergonomic and performance aspects of Camera Monitor Systems — Requirements and test procedures
|
95.99 | ISO/TC 22/SC 35 |
Road vehicles — Ergonomic and performance aspects of Camera Monitor Systems — Requirements and test procedures
|
90.20 | ISO/TC 22/SC 35 |
Road vehicles — Ergonomic and performance aspects of Camera Monitor Systems — Requirements and test procedures — Amendment 1: ORP, FeV, MTF10MIN(1:1)/hor, MTF10MIN(1:1)/ver
|
60.60 | ISO/TC 22/SC 35 |
Road vehicles — Ergonomic aspects of transport information and control systems — Occlusion method to assess visual demand due to the use of in-vehicle systems
|
95.99 | ISO/TC 22/SC 39 |
Road vehicles — Ergonomic aspects of transport information and control systems — Occlusion method to assess visual demand due to the use of in-vehicle systems
|
90.60 | ISO/TC 22/SC 39 |
Ergonomics methods — Part 1: Feedback method — A method to understand how end users perform their work with machines
|
50.20 | ISO/TC 159/SC 1 |
Ergonomics methods — Part 2: A methodology for work analysis to support design
|
30.99 | ISO/TC 159/SC 1 |
Road vehicles — Ergonomic aspects of transport information and control systems (TICS) — Procedures for determining priority of on-board messages presented to drivers
|
95.99 | ISO/TC 22/SC 39 |
Road vehicles — Ergonomic aspects of transport information and control systems (TICS) — Procedures for determining priority of on-board messages presented to drivers
|
90.60 | ISO/TC 22/SC 39 |
Ergonomics of human-system interaction — Usability methods supporting human-centred design
|
90.93 | ISO/TC 159/SC 4 |
Accessible design — Application of braille on signage, equipment and appliances
|
90.93 | ISO/TC 173/SC 7 |
Accessible design — Consideration and assistive products for accessible meeting
|
95.99 | ISO/TC 173/SC 7 |
Accessible design — Consideration and assistive products for accessible meeting
|
60.60 | ISO/TC 173/SC 7 |
3-D human body scan data — Methods for the processing of human body scan data
|
60.60 | ISO/TC 159/SC 3 |
Road vehicles — Ergonomic aspects of transport information and control systems — Procedure for assessing suitability for use while driving
|
90.60 | ISO/TC 22/SC 39 |
Biomechanical effects on amusement ride passengers
|
90.92 | ISO/TC 254 |
Ergonomics of human-system interaction — Specification for the process assessment of human-system issues
|
95.99 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Specification for the process assessment of human-system issues
|
90.93 | ISO/TC 159/SC 4 |
Ergonomics — Ergonomics of human-system interaction — Human-centred lifecycle process descriptions
|
95.99 | ISO/TC 159/SC 4 |
Accessible design — Shape and colour of a flushing button and a call button, and their arrangement with a paper dispenser installed on the wall in public restroom
|
90.93 | ISO/TC 173/SC 7 |
Design principles for communication support board using pictorial symbols
|
90.93 | ISO/TC 173/SC 7 |
Accessible design — Information contents, figuration and display methods of tactile guide maps
|
90.93 | ISO/TC 173/SC 7 |
Accessible design — Auditory guiding signals in public facilities
|
90.93 | ISO/TC 173/SC 7 |
Ergonomics — Construction and application of tests for speech technology
|
90.93 | ISO/TC 159/SC 5 |
Unwanted reflections from the active and inactive areas of display surfaces visible during use
|
90.93 | ISO/TC 159/SC 4 |
Ease of operation of everyday products — Part 1: Design requirements for context of use and user characteristics
|
90.93 | ISO/TC 159/SC 1 |
Ease of operation of everyday products — Part 2: Test method for walk-up-and-use products
|
95.99 | ISO/TC 159/SC 4 |
Usability of consumer products and products for public use — Part 2: Summative test method
|
90.93 | ISO/TC 159/SC 4 |
Ease of operation of everyday products — Part 3: Test method for consumer products
|
95.99 | ISO/TC 159/SC 4 |
Ease of operation of everyday products — Part 4: Test method for the installation of consumer products
|
95.99 | ISO/TC 159/SC 4 |
Information technology — Cross-jurisdictional and societal aspects of implementation of biometric technologies — Biometrics and elderly people
|
60.60 | ISO/IEC JTC 1/SC 37 |
Ergonomic procedures for the improvement of local muscular workloads — Part 1: Guidelines for reducing local muscular workloads
|
95.99 | ISO/TC 159/SC 3 |
Ergonomics guidelines for the optimization of musculoskeletal workload
|
90.93 | ISO/TC 159/SC 3 |
3-D scanning methodologies for internationally compatible anthropometric databases — Part 1: Evaluation protocol for body dimensions extracted from 3-D body scans
|
90.60 | ISO/TC 159/SC 3 |
Ergonomics — 3-D scanning methodologies for internationally compatible anthropometric databases — Part 2: Evaluation protocol of surface shape and repeatability of relative landmark positions
|
95.99 | ISO/TC 159/SC 3 |
Ergonomics — 3-D scanning methodologies for internationally compatible anthropometric databases — Part 2: Evaluation protocol of surface shape and repeatability of relative landmark positions
|
60.60 | ISO/TC 159/SC 3 |
3-D scanning methodologies for internationally compatible anthropometric databases
|
95.99 | ISO/TC 159/SC 3 |
3-D scanning methodologies for internationally compatible anthropometric databases
|
95.99 | ISO/TC 159/SC 3 |
Ergonomics — Accessible design — Controls of consumer products
|
90.93 | ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Electronic paper display — Indoor use
|
95.99 | ISO/TC 159/SC 4 |
Road vehicles — Ergonomics aspects of transport information and control systems — Human machine interface specifications for keyless ignition systems
|
60.60 | ISO/TC 22/SC 39 |
Safety of machinery — Relationship with ISO 12100 — Part 3: Implementation of ergonomic principles in safety standards
|
60.60 | ISO/TC 199 |
Ergonomics — Recovery model for cyclical industrial work
|
60.60 | ISO/TC 159/SC 3 |
Human performance in physical environments — Part 1: A performance framework
|
30.99 | ISO/TC 159/SC 5 |
Safety of machinery — Ergonomic principles for the design of sorting cabins intended for the manual sorting of dry household and similar waste originating from selective collection
|
30.99 | ISO/TC 159/SC 3 |
Ergonomics — Application of ISO 11226, the ISO 11228 series and ISO/TR 12295 in the agricultural sector
|
60.60 | ISO/TC 159/SC 3 |
Road vehicles — Ergonomic design guidance for external visual communication from automated vehicles to other road users
|
30.98 | ISO/TC 22/SC 39 |
Validation protocol for walking speed as extracted from various sensor systems that measure human body motion for the healthcare sector
|
60.60 | ISO/TC 159/SC 3 |
Ergonomics — Accessible design — Auditory signals for consumer products
|
90.93 | ISO/TC 159/SC 5 |
Ergonomics — Accessible design — Sound pressure levels of auditory signals for consumer products
|
90.93 | ISO/TC 159/SC 5 |
Ergonomics — Accessible design — Specification of age-related luminance contrast for coloured light
|
90.93 | ISO/TC 159/SC 5 |
Ergonomics — Accessible design — Tactile dots and bars on consumer products
|
90.93 | ISO/TC 159/SC 4 |
Ergonomics — Accessible design — Sound pressure levels of spoken announcements for products and public address systems
|
90.93 | ISO/TC 159/SC 5 |
Ergonomics — Accessible design — Method for creating colour combinations — Part 1: For people with normal colour vision including age related change
|
40.99 | ISO/TC 159/SC 5 |
Ergonomics — Accessible design — Method for creating colour combinations — Part 2: For people with colour deficiency and low vision
|
40.99 | ISO/TC 159/SC 5 |
Ergonomics — Accessible design — Method for creating colour combinations taking account of age-related changes in human colour vision
|
90.92 | ISO/TC 159/SC 5 |
Ergonomics — Accessible design — Guidelines for designing tactile symbols and characters
|
90.60 | ISO/TC 159/SC 4 |
Ergonomics — Accessible design — A method for estimating minimum legible font size for people at any age
|
60.60 | ISO/TC 159/SC 4 |
Ergonomics — Accessible design — Indicator lights on consumer products
|
60.60 | ISO/TC 159/SC 4 |
Ergonomics — Accessible design — Spoken instructions of consumer products
|
60.60 | ISO/TC 159/SC 4 |
Ergonomics — Accessible design — Accessibility of information presented on visual displays of small consumer products
|
60.60 | ISO/TC 159/SC 4 |
Ergonomics — Accessible design — Ease of operation
|
60.60 | ISO/TC 159/SC 3 |
Systems and software engineering — Software product Quality Requirements and Evaluation (SQuaRE) — Common Industry Format (CIF) for Usability: User requirements specification
|
90.20 | ISO/TC 159/SC 4 |
Ageing societies — Accessibility and usability considerations for home healthcare products, related services and environments
|
60.60 | ISO/TC 314 |
Road vehicles — Ergonomic aspects of transport information and control systems — Simulated lane change test to assess in-vehicle secondary task demand
|
90.93 | ISO/TC 22/SC 39 |
Ergonomics — General approach, principles and concepts
|
90.93 | ISO/TC 159/SC 1 |
The human-centred organization — Rationale and general principles
|
90.93 | ISO/TC 159/SC 1 |
The human-centred organization — Guidance for managers
|
90.93 | ISO/TC 159/SC 1 |
Ergonomics of the physical environment — Assessment of environments by means of an environmental survey involving physical measurements of the environment and subjective responses of people
|
90.93 | ISO/TC 159/SC 5 |
Ergonomics of the physical environment — Application of International Standards to people with special requirements
|
90.93 | ISO/TC 159/SC 5 |
Information Technology — Biometrics — Guide on designing accessible and inclusive biometric systems
|
90.93 | ISO/IEC JTC 1/SC 37 |
По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.