Filter :
Standard and/or project | Stage | TC |
---|---|---|
Plain bearings made from sintered material — Dimensions and tolerances
|
95.99 | ISO/TC 123 |
Plain bearings made from sintered material — Dimensions and tolerances
|
95.99 | ISO/TC 123/SC 3 |
Plain bearings — Sintered bushes — Dimensions and tolerances
|
95.99 | ISO/TC 123/SC 7 |
Plain bearings — Sintered bushes — Dimensions and tolerances
|
95.99 | ISO/TC 123/SC 7 |
Plain bearings — Sintered bushes — Dimensions and tolerances
|
60.60 | ISO/TC 123/SC 7 |
Plain bearings — Wrapped bushes — Part 1: Dimensions
|
95.99 | ISO/TC 123/SC 3 |
Plain bearings — Wrapped bushes — Part 1: Dimensions
|
95.99 | ISO/TC 123/SC 3 |
Plain bearings — Wrapped bushes — Part 1: Dimensions
|
90.60 | ISO/TC 123/SC 3 |
Plain bearings — Wrapped bushes — Part 2: Test data for outside and inside diameter
|
95.99 | ISO/TC 123/SC 3 |
Plain bearings — Wrapped bushes — Part 2: Test data for outside and inside diameters
|
95.99 | ISO/TC 123/SC 3 |
Plain bearings — Wrapped bushes — Part 2: Test data for outside and inside diameters
|
95.99 | ISO/TC 123/SC 3 |
Plain bearings — Wrapped bushes — Part 2: Test data for outside and inside diameters
|
60.60 | ISO/TC 123/SC 3 |
Plain bearings — Wrapped bushes — Part 3: Lubrication holes, lubrication grooves and lubrication indentations
|
95.99 | ISO/TC 123/SC 3 |
Plain bearings — Wrapped bushes — Part 3: Lubrication holes, grooves and indentations
|
95.99 | ISO/TC 123/SC 3 |
Plain bearings — Wrapped bushes — Part 3: Lubrication holes, grooves and indentations
|
90.93 | ISO/TC 123/SC 3 |
Plain bearings — Wrapped bushes — Part 4: Materials
|
95.99 | ISO/TC 123/SC 3 |
Plain bearings — Wrapped bushes — Part 4: Materials
|
95.99 | ISO/TC 123/SC 3 |
Plain bearings — Wrapped bushes — Part 4: Materials
|
90.60 | ISO/TC 123/SC 3 |
Plain bearings — Wrapped bushes — Part 5: Checking the outside diameter
|
95.99 | ISO/TC 123/SC 5 |
Plain bearings — Wrapped bushes — Part 5: Checking the outside diameter
|
60.60 | ISO/TC 123/SC 5 |
Plain bearings — Wrapped bushes — Part 6: Checking the inside diameter
|
95.99 | ISO/TC 123/SC 5 |
Plain bearings — Wrapped bushes — Part 6: Checking the inside diameter
|
60.60 | ISO/TC 123/SC 5 |
Plain bearings — Wrapped bushes — Part 7: Measurement of wall thickness of thin-walled bushes
|
95.99 | ISO/TC 123/SC 5 |
Plain bearings — Wrapped bushes — Part 7: Measurement of wall thickness of thin-walled bushes
|
60.60 | ISO/TC 123/SC 5 |
Plain bearings — Wrapped bushes — Dimensions, tolerances and methods of checking
|
95.99 | ISO/TC 123 |
Plain bearings — Thin-walled half bearings with or without flange — Part 1: Tolerances, design features and methods of test
|
95.99 | ISO/TC 123/SC 3 |
Plain bearings — Thin-walled half bearings with or without flange — Part 1: Tolerances, design features and methods of test
|
60.60 | ISO/TC 123/SC 3 |
Plain bearings — Thin-walled half bearings with or without flange — Part 1: Tolerances, design features and methods of test — Amendment 1
|
60.60 | ISO/TC 123/SC 3 |
Plain bearings — Thin-walled half bearings with or without flange — Part 2: Measurement of wall thickness and flange thickness
|
95.99 | ISO/TC 123/SC 5 |
Plain bearings — Thin-walled half bearings with or without flange — Part 2: Measurement of wall thickness and flange thickness
|
60.60 | ISO/TC 123/SC 5 |
Plain bearings — Thin-walled half bearings with or without flange — Part 3: Measurement of peripheral length
|
95.99 | ISO/TC 123/SC 5 |
Plain bearings — Thin-walled half bearings with or without flange — Part 3: Determination of the peripheral length
|
60.60 | ISO/TC 123/SC 5 |
Plain bearings — Thin-walled half bearings — Dimensions, tolerances and methods of checking
|
95.99 | ISO/TC 123 |
Plain bearings — Thin-walled half bearings with or without flange — Tolerances, design features and methods of test
|
95.99 | ISO/TC 123/SC 3 |
Plain bearings — Shaft diameters for unsplit bushes
|
95.99 | ISO/TC 123 |
Plain bearings — Terms, definitions and classification — Part 1: Design, bearing materials and their properties
|
95.99 | ISO/TC 123 |
Plain bearings — Terms, definitions and classification — Part 1: Design, bearing materials and their properties
|
95.99 | ISO/TC 123/SC 6 |
Plain bearings — Terms, definitions, classification and symbols — Part 1: Design, bearing materials and their properties
|
95.99 | ISO/TC 123/SC 6 |
Plain bearings — Terms, definitions, classification and symbols — Part 1: Design, bearing materials and their properties
|
90.92 | ISO/TC 123/SC 6 |
Plain bearings — Terms, definitions, classification and symbols — Part 1: Design, bearing materials and their properties
|
50.20 | ISO/TC 123/SC 6 |
Plain bearings — Terms, definitions and classification — Part 2: Friction and wear
|
95.99 | ISO/TC 123/SC 6 |
Plain bearings — Terms, definitions, classification and symbols — Part 2: Friction and wear
|
95.99 | ISO/TC 123/SC 6 |
Plain bearings — Terms, definitions, classification and symbols — Part 2: Friction and wear
|
90.92 | ISO/TC 123/SC 6 |
Plain bearings — Terms, definitions, classification and symbols — Part 2: Friction and wear
|
50.20 | ISO/TC 123/SC 6 |
Plain bearings — Terms, definitions and classification — Part 3: Lubrication
|
95.99 | ISO/TC 123/SC 6 |
Plain bearings — Terms, definitions, classification and symbols — Part 3: Lubrication
|
95.99 | ISO/TC 123/SC 6 |
Plain bearings — Terms, definitions, classification and symbols — Part 3: Lubrication
|
90.92 | ISO/TC 123/SC 6 |
Plain bearings — Terms, definitions, classification and symbols — Part 3: Lubrication
|
50.20 | ISO/TC 123/SC 6 |
Plain bearings — Terms, definitions and classification — Part 4: Calculation parameters and their symbol
|
95.99 | ISO/TC 123/SC 6 |
Plain bearings — Terms, definitions, classification and symbols — Part 4: Basic symbols
|
90.93 | ISO/TC 123/SC 6 |
Plain bearings — Terms, definitions, classification and symbols — Part 5: Application of symbols
|
90.93 | ISO/TC 123/SC 6 |
Plain bearings — Terms, definitions, classification and symbols — Part 6: Abbreviated terms
|
60.60 | ISO/TC 123/SC 6 |
Plain bearings — Solid copper alloy bushes _ Dimensions and tolerances
|
95.99 | ISO/TC 123 |
Plain bearings — Copper alloy bushes
|
95.99 | ISO/TC 123/SC 3 |
Plain bearings — Copper alloy bushes
|
90.92 | ISO/TC 123/SC 3 |
Plain bearings — Copper alloy bushes — Dimensions and tolerances
|
60.00 | ISO/TC 123/SC 3 |
Plain bearings — Lead and tin casting alloys for multilayer plain bearings
|
95.99 | ISO/TC 123 |
Plain bearings — Lead and tin casting alloys for multilayer plain bearings
|
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Lead and tin casting alloys for multilayer plain bearings
|
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Tin casting alloys for multilayer plain bearings
|
90.60 | ISO/TC 123/SC 2 |
Plain bearings — Copper alloys — Part 1: Cast copper alloys for solid and multilayer plain bearings
|
95.99 | ISO/TC 123 |
Plain bearings — Copper alloys — Part 1: Cast copper alloys for solid and multilayer thick-walled plain bearings
|
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Copper alloys — Part 1: Cast copper alloys for solid and multilayer thick-walled plain bearings
|
60.60 | ISO/TC 123/SC 2 |
Plain bearings — Copper alloys — Part 2: Wrought copper alloys for solid plain bearings
|
95.99 | ISO/TC 123 |
Plain bearings — Copper alloys — Part 2: Wrought copper alloys for solid plain bearings
|
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Copper alloys — Part 2: Wrought copper alloys for solid plain bearings
|
60.60 | ISO/TC 123/SC 2 |
Plain bearings — Metallic multilayer materials for thin-walled plain bearings
|
95.99 | ISO/TC 123 |
Plain bearings — Multilayer materials for thin-walled plain bearings
|
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Multilayer materials for thin-walled plain bearings
|
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Multilayer materials for thin-walled plain bearings
|
90.92 | ISO/TC 123/SC 2 |
Plain bearings — Multilayer materials for thin-walled plain bearings
|
40.20 | ISO/TC 123/SC 2 |
Plain bearings — Hardness testing of bearing metals — Part 1: Compound materials
|
95.99 | ISO/TC 123 |
Plain bearings — Hardness testing of bearing metals — Part 1: Compound materials
|
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Hardness testing of bearing metals — Part 1: Multilayer bearings materials
|
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Hardness testing of bearing metals — Part 1: Multilayer bearings materials
|
90.93 | ISO/TC 123/SC 2 |
Plain bearings — Hardness testing of bearing metals — Part 2: Solid materials
|
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Hardness testing of bearing metals — Part 2: Solid materials
|
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Hardness testing of bearing metals — Part 2: Solid materials
|
60.60 | ISO/TC 123/SC 2 |
Plain bearings — Compression testing of metallic bearing materials
|
90.92 | ISO/TC 123/SC 2 |
Plain bearings — Compression testing of bearing materials
|
50.20 | ISO/TC 123/SC 2 |
Plain bearings — Metallic multilayer plain bearings — Part 1: Non-destructive ultrasonic testing of bond for bearing metal layer thicknesses equal to or greater than 2 mm
|
95.99 | ISO/TC 123 |
Plain bearings — Metallic multilayer plain bearings — Part 1: Non-destructive ultrasonic testing of bond
|
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Metallic multilayer plain bearings — Part 1: Non-destructive ultrasonic testing of bond of thickness greater than or equal to 0,5 mm
|
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Metallic multilayer plain bearings — Part 1: Non-destructive ultrasonic testing of bond of thickness greater than or equal to 0,5 mm
|
90.60 | ISO/TC 123/SC 2 |
Plain bearings — Metallic multilayer plain bearings — Part 2: Destructive testing of bond for bearing metal layer thicknesses greater than or equal to 2 mm
|
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Metallic multilayer plain bearings — Part 2: Destructive testing of bond for bearing metal layer thicknesses greater than or equal to 2 mm
|
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Metallic multilayer plain bearings — Part 2: Destructive testing of bond for bearing metal layer thicknesses greater than or equal to 2 mm
|
90.60 | ISO/TC 123/SC 2 |
Plain bearings — Metallic multilayer plain bearings — Part 3: Non-destructive penetrant testing
|
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Metallic multilayer plain bearings — Part 3: Non-destructive penetrant testing
|
90.60 | ISO/TC 123/SC 2 |
Plain bearings — Dynamic adhesion test method for DLC coated parts under lubricated condition
|
60.60 | ISO/TC 123/SC 7 |
Sintered metal materials — Specifications — Part 1: Materials, for bearings, impregnated with liquid lubricant
|
95.99 | ISO/TC 119 |
Sintered metal materials — Specifications — Part 1: Materials, for bearings, impregnated with liquid lubricant
|
95.99 | ISO/TC 119 |
Spherical plain radial bearings, joint type — Boundary dimensions — Part 1: Dimension series E and G
|
95.99 | ISO/TC 4 |
Spherical plain radial bearings, joint type — Boundary dimensions — Part 1: Dimension series E and G
|
95.99 | ISO/TC 4/SC 7 |
Spherical plain radial bearings, joint type — Boundary dimensions — Part 2: Dimension series EW, bearings with extended inner ring
|
95.99 | ISO/TC 4/SC 7 |
Spherical plain radial bearings, joint type — Boundary dimensions — Part 3: Dimension series C
|
95.99 | ISO/TC 4/SC 7 |
Withdrawal of ISO 6124-1979
|
95.99 | ISO/TC 4 |
Spherical plain radial bearings; joint type — Tolerances
|
95.99 | ISO/TC 4/SC 7 |
Spherical plain bearing rod ends — Dimension series E and JK — Boundary dimensions and tolerances
|
95.99 | ISO/TC 4/SC 7 |
Spherical plain bearing rod ends — Dimension series E and JK — Boundary dimensions and tolerances
|
95.99 | ISO/TC 4/SC 7 |
Plain bearings — Aluminium alloy for solid bearings
|
95.99 | ISO/TC 123 |
Plain bearings — Aluminium alloys for solid bearings
|
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Aluminium alloys for solid bearings
|
90.60 | ISO/TC 123/SC 2 |
Plain bearings — Requirements on backings for thick-walled multilayer bearings
|
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Requirements and guidance on backings for thick-walled multilayer bearings
|
90.60 | ISO/TC 123/SC 2 |
Plain bearings — Testing under conditions of hydrodynamic and mixed lubrication in test rigs
|
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Testing under conditions of hydrodynamic and mixed lubrication in test rigs — Guidelines
|
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Testing under conditions of hydrodynamic and mixed lubrication in test rigs
|
60.60 | ISO/TC 123/SC 2 |
Plain bearings — Metallic thin-walled half bearings — Determination of the sigma 0,01*-limit
|
95.99 | ISO/TC 123/SC 2 |
Withdrawal of ISO/TR 6282-1979
|
95.99 | ISO/TC 123 |
Plain bearings — Metallic thin-walled half bearings — Determination of the sigma 0,01*-limit
|
90.60 | ISO/TC 123/SC 2 |
Plain bearings — Methods of dimensional control — Peripherical length checking of thin-walled half bearings
|
95.99 | ISO/TC 123/SC 3 |
Plain bearings — Thin-walled half-bearings — Checking of peripheral length
|
95.99 | ISO/TC 123/SC 3 |
Plain bearings — Ring type thrust washers made from strip — Dimensions and tolerances
|
95.99 | ISO/TC 123/SC 3 |
Plain bearings — Ring type thrust washers made from strip — Dimensions and tolerances
|
90.60 | ISO/TC 123/SC 3 |
Plain bearings — Pressed bimetallic half thrust washers — Features and tolerances
|
95.99 | ISO/TC 123/SC 3 |
Plain bearings — Pressed bimetallic half thrust washers — Features and tolerances
|
90.60 | ISO/TC 123/SC 3 |
Thermoplastics for plain bearings — Classification and designation
|
95.99 | ISO/TC 123/SC 2 |
Thermoplastic polymers for plain bearings — Classification and designation
|
95.99 | ISO/TC 123/SC 2 |
Thermoplastic polymers for plain bearings — Classification and designation
|
60.60 | ISO/TC 123/SC 2 |
Spherical plain bearings — Vocabulary
|
95.99 | ISO/TC 4/SC 7 |
Spherical plain bearings — Vocabulary
|
90.93 | ISO/TC 4/SC 7 |
Spherical plain bearings — Vocabulary — Technical Corrigendum 1
|
60.60 | ISO/TC 4/SC 7 |
Plain bearings — Thermo-hydrodynamic lubrication design charts for circular cylindrical bearings under steady-state conditions
|
60.60 | ISO/TC 123/SC 8 |
Plain bearings — Thin-walled flanged half bearings — Dimensions, tolerances and methods of checking
|
95.99 | ISO/TC 123/SC 3 |
Plain bearings — Appearance and characterization of damage to metallic hydrodynamic bearings — Part 1: General
|
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Appearance and characterization of damage to metallic hydrodynamic bearings — Part 1: General
|
90.60 | ISO/TC 123/SC 2 |
Plain bearings — Appearance and characterization of damage to metallic hydrodynamic bearings — Part 2: Cavitation erosion and its countermeasures
|
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Appearance and characterization of damage to metallic hydrodynamic bearings — Part 2: Cavitation erosion and its countermeasures
|
90.60 | ISO/TC 123/SC 2 |
Plain bearings — Terms, characteristics and causes of damage and changes in appearance
|
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Testing of the tribological behaviour of plastics
|
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Testing of the tribological behaviour of bearing materials — Part 1: Testing of the friction and wear behaviour of bearing material/mating material/oil combinations under conditions of boundary lubrication
|
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Testing of the tribological behaviour of bearing materials — Part 1: Testing of bearing metals
|
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Testing of the tribological behaviour of bearing materials — Part 1: Testing of bearing metals
|
90.92 | ISO/TC 123/SC 2 |
Plain bearings — Testing of the tribological behaviour of bearing materials — Part 1: Testing of bearing metals
|
40.20 | ISO/TC 123/SC 2 |
Plain bearings — Testing of the tribological behaviour of bearing materials — Part 2: Testing of polymer-based bearing materials
|
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Testing of the tribological behaviour of bearing materials — Part 2: Testing of polymer-based bearing materials
|
90.92 | ISO/TC 123/SC 2 |
Plain bearings — Testing of the tribological behaviour of bearing materials — Part 2: Testing of polymer-based bearing materials
|
40.20 | ISO/TC 123/SC 2 |
Hydrodynamic plain journal bearings under steady-state conditions — Circular cylindrical bearings — Part 1: Calculation procedure
|
95.99 | ISO/TC 123 |
Hydrodynamic plain journal bearings under steady-state conditions — Circular cylindrical bearings — Part 1: Calculation procedure
|
95.99 | ISO/TC 123/SC 8 |
Hydrodynamic plain journal bearings under steady-state conditions — Circular cylindrical bearings — Part 1: Calculation procedure
|
60.60 | ISO/TC 123/SC 8 |
Hydrodynamic plain journal bearings under steady-state conditions — Circular cylindrical bearings — Part 2: Functions used in the calculation procedure
|
95.99 | ISO/TC 123/SC 8 |
Hydrodynamic plain journal bearings under steady-state conditions — Circular cylindrical bearings — Part 2: Functions used in the calculation procedure
|
60.60 | ISO/TC 123/SC 8 |
Hydrodynamic plain journal bearings under steady-state conditions — Circular cylindrical bearings — Part 3: Permissible operational parameters
|
95.99 | ISO/TC 123/SC 8 |
Hydrodynamic plain journal bearings under steady-state conditions — Circular cylindrical bearings — Part 3: Permissible operational parameters
|
60.60 | ISO/TC 123/SC 8 |
Plain bearings — Symbols — Part 1: Basic symbols
|
95.99 | ISO/TC 123/SC 6 |
Plain bearings — Symbols — Part 2: Applications
|
95.99 | ISO/TC 123/SC 6 |
Plain bearings — Bearing fatigue — Part 1: Plain bearings in test rigs and in applications under conditions of hydrodynamic lubrication
|
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Bearing fatigue — Part 1: Plain bearings in test rigs and in applications under conditions of hydrodynamic lubrication
|
60.60 | ISO/TC 123/SC 2 |
Plain bearings — Bearing fatigue — Part 2: Test with a cylindrical specimen of a metallic bearing material
|
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Bearing fatigue — Part 2: Test with a cylindrical specimen of a metallic bearing material
|
60.60 | ISO/TC 123/SC 2 |
Plain bearings — Bearing fatigue — Part 3: Test on plain strips of a metallic multilayer bearing material
|
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Bearing fatigue — Part 3: Test on plain strips of a metallic multilayer bearing material
|
90.60 | ISO/TC 123/SC 2 |
Plain bearings — Bearing fatigue — Part 4: Tests on half-bearings of a metallic multilayer bearing material
|
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Bearing fatigue — Part 4: Tests on half-bearings of a metallic multilayer bearing material
|
60.60 | ISO/TC 123/SC 2 |
Plain bearings — Evaluation of the tribological properties of polymer-based materials
|
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Water-lubricated plain bearing materials
|
60.60 | ISO/TC 123/SC 7 |
Plain bearings — Testing of the tribological behaviour of bearing materials for oil lubrication application — Running-in under mixed lubrication conditions
|
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Testing of bearing metals — Resistance to corrosion by lubricants under static conditions
|
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Testing of bearing metals — Resistance to corrosion by lubricants under static conditions
|
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Testing of bearing metals — Resistance to corrosion by lubricants under static conditions
|
90.60 | ISO/TC 123/SC 2 |
Plain bearings — Pedestal plain bearings — Part 1: Pillow blocks
|
95.99 | ISO/TC 123/SC 3 |
Plain bearings — Pedestal plain bearings — Part 1: Pillow blocks
|
60.60 | ISO/TC 123/SC 3 |
Plain bearings — Pedestal plain bearings — Part 2: Side flange bearings
|
95.99 | ISO/TC 123/SC 3 |
Plain bearings — Pedestal plain bearings — Part 2: Side flange bearings
|
60.60 | ISO/TC 123/SC 3 |
Plain bearings — Pedestal plain bearings — Part 3: Centre flange bearings
|
95.99 | ISO/TC 123/SC 3 |
Plain bearings — Pedestal plain bearings — Part 3: Centre flange bearings
|
60.60 | ISO/TC 123/SC 3 |
Plain bearings — Lubrication holes, grooves and pockets — Dimensions, types, designation and their application to bearing bushes
|
95.99 | ISO/TC 123/SC 3 |
Plain bearings — Lubrication holes, grooves and pockets — Dimensions, types, designation and their application to bearing bushes
|
95.99 | ISO/TC 123/SC 3 |
Plain bearings — Lubrication holes, grooves and pockets — Dimensions, types, designation and their application to bearing bushes
|
60.60 | ISO/TC 123/SC 3 |
Plain bearings — Part 1: Fits
|
95.99 | ISO/TC 123/SC 3 |
Plain bearings — Tolerances — Part 1: Fits
|
90.92 | ISO/TC 123/SC 3 |
Plain bearings — Tolerances — Part 1: Fits
|
60.00 | ISO/TC 123/SC 3 |
Plain bearings — Part 2: Tolerances on form and position and surface roughness for shafts, flanges and thrust collars
|
95.99 | ISO/TC 123/SC 3 |
Plain bearings — Tolerances — Part 2: Tolerances on form and position and surface roughness for shafts and thrust collars
|
90.60 | ISO/TC 123/SC 3 |
Plain bearings — Hydrodynamic plain tilting pad thrust bearings under steady-state conditions — Part 1: Calculation of tilting pad thrust bearings
|
95.99 | ISO/TC 123/SC 8 |
Plain bearings — Hydrodynamic plain tilting pad thrust bearings under steady-state conditions — Part 1: Calculation of tilting pad thrust bearings
|
60.60 | ISO/TC 123/SC 8 |
Plain bearings — Hydrodynamic plain tilting pad thrust bearings under steady-state conditions — Part 2: Functions for calculation of tilting pad thrust bearings
|
95.99 | ISO/TC 123 |
Plain bearings — Hydrodynamic plain tilting pad thrust bearings under steady-state conditions — Part 2: Functions for calculation of tilting pad thrust bearings
|
95.99 | ISO/TC 123/SC 8 |
Plain bearings — Hydrodynamic plain tilting pad thrust bearings under steady-state conditions — Part 2: Functions for calculation of tilting pad thrust bearings
|
60.60 | ISO/TC 123/SC 8 |
Plain bearings — Hydrodynamic plain tilting pad thrust bearings under steady-state conditions — Part 3: Guide values for the calculation of tilting pad thrust bearings
|
95.99 | ISO/TC 123/SC 8 |
Plain bearings — Hydrodynamic plain tilting pad thrust bearings under steady-state conditions — Part 3: Guide values for the calculation of tilting pad thrust bearings
|
60.60 | ISO/TC 123/SC 8 |
Plain bearings — Hydrodynamic plain thrust pad bearings under steady-state conditions — Part 1: Calculation of thrust pad bearings
|
95.99 | ISO/TC 123/SC 8 |
Plain bearings — Hydrodynamic plain thrust pad bearings under steady-state conditions — Part 1: Calculation of thrust pad bearings
|
60.60 | ISO/TC 123/SC 8 |
Plain bearings — Hydrodynamic plain thrust pad bearings under steady-state conditions — Part 2: Functions for the calculation of thrust pad bearings
|
95.99 | ISO/TC 123 |
Plain bearings — Hydrodynamic plain thrust pad bearings under steady-state conditions — Part 2: Functions for the calculation of thrust pad bearings
|
95.99 | ISO/TC 123/SC 8 |
Plain bearings — Hydrodynamic plain thrust pad bearings under steady-state conditions — Part 2: Functions for the calculation of thrust pad bearings
|
60.60 | ISO/TC 123/SC 8 |
Plain bearings — Hydrodynamic plain thrust pad bearings under steady-state conditions — Part 3: Guide values for the calculation of thrust pad bearings
|
95.99 | ISO/TC 123/SC 8 |
Plain bearings — Hydrodynamic plain thrust pad bearings under steady-state conditions — Part 3: Guide values for the calculation of thrust pad bearings
|
60.60 | ISO/TC 123/SC 8 |
Plain bearings — Quality assurance of thin- walled half bearings — Design FMEA
|
95.99 | ISO/TC 123/SC 5 |
Plain bearings — Quality assurance of thin-walled half bearings — Design FMEA
|
90.92 | ISO/TC 123/SC 5 |
Plain bearings — Hydrostatic plain journal bearings with drainage grooves under steady-state conditions — Part 1: Calculation of oil-lubricated plain journal bearings with drainage grooves
|
95.99 | ISO/TC 123 |
Plain bearings — Hydrostatic plain journal bearings with drainage grooves under steady-state conditions — Part 1: Calculation of oil-lubricated plain journal bearings with drainage grooves
|
95.99 | ISO/TC 123/SC 8 |
Plain bearings — Hydrostatic plain journal bearings with drainage grooves under steady-state conditions — Part 1: Calculation of oil-lubricated plain journal bearings with drainage grooves
|
60.60 | ISO/TC 123/SC 8 |
Plain bearings — Hydrostatic plain journal bearings with drainage grooves under steady-state conditions — Part 2: Characteristic values for the calculation of oil-lubricated plain journal bearings with drainage grooves
|
95.99 | ISO/TC 123/SC 8 |
Plain bearings — Hydrostatic plain journal bearings with drainage grooves under steady-state conditions — Part 2: Characteristic values for the calculation of oil-lubricated plain journal bearings with drainage grooves
|
60.60 | ISO/TC 123/SC 8 |
Plain bearings — Hydrostatic plain journal bearings without drainage grooves under steady-state conditions — Part 1: Calculation of oil-lubricated plain journal bearings without drainage grooves
|
95.99 | ISO/TC 123/SC 8 |
Plain bearings — Hydrostatic plain journal bearings without drainage grooves under steady-state conditions — Part 1: Calculation of oil-lubricated plain journal bearings without drainage grooves
|
90.20 | ISO/TC 123/SC 8 |
Plain bearings — Hydrostatic plain journal bearings without drainage grooves under steady-state conditions — Part 2: Characteristic values for the calculation of oil-lubricated plain journal bearings without drainage grooves
|
95.99 | ISO/TC 123/SC 8 |
Plain bearings — Hydrostatic plain journal bearings without drainage grooves under steady-state conditions — Part 2: Characteristic values for the calculation of oil-lubricated plain journal bearings without drainage grooves
|
90.20 | ISO/TC 123/SC 8 |
Spherical plain bearings — Part 1: Radial spherical plain bearings
|
90.93 | ISO/TC 4/SC 7 |
Spherical plain bearings — Part 2: Angular contact radial spherical plain bearings
|
90.93 | ISO/TC 4/SC 7 |
Spherical plain bearings — Part 3: Thrust spherical plain bearings
|
90.93 | ISO/TC 4/SC 7 |
Spherical plain bearings — Part 4: Spherical plain bearing rod ends
|
90.93 | ISO/TC 4/SC 7 |
Spherical plain bearings — Part 4: Spherical plain bearing rod ends — Technical Corrigendum 1
|
60.60 | ISO/TC 4/SC 7 |
Plain bearings — Quality control techniques and inspection of geometrical and material quality characteristics
|
95.99 | ISO/TC 123/SC 5 |
Plain bearings — Quality control techniques and inspection of geometrical and material quality characteristics — Technical Corrigendum 1
|
95.99 | ISO/TC 123/SC 5 |
Plain bearings — Quality control techniques and inspection of geometrical and material quality characteristics
|
90.92 | ISO/TC 123/SC 5 |
Plain bearings — Quality characteristics — Statistical process control (SPC)
|
95.99 | ISO/TC 123/SC 5 |
Plain bearings — Quality characteristics — Statistical process control (SPC)
|
90.60 | ISO/TC 123/SC 5 |
Plain bearings — Quality characteristics — Calculation of machine and process capabilities
|
95.99 | ISO/TC 123/SC 5 |
Plain bearings — Measurement of wall thickness of thin-walled half-bearings and thin-walled bushes
|
95.99 | ISO/TC 123/SC 5 |
Plain bearings — Wrapped bushes — Part 1: Checking the outside diameter
|
95.99 | ISO/TC 123/SC 5 |
Plain bearings — Checking of wrapped bushes — Part 2: Checking the inside diameter
|
95.99 | ISO/TC 123/SC 5 |
Plain bearings — Quality assurance — Sample types — Definitions, applications and testing
|
95.99 | ISO/TC 123/SC 5 |
Plain bearings — Quality assurance of sample types — Definitions, applications and testing
|
90.60 | ISO/TC 123/SC 5 |
Plain bearings — Reuse, recycling and disposal of plain bearing materials
|
60.60 | ISO/TC 123/SC 6 |
Plain bearings — Quality assurance of thin-walled half bearings — Selective assembly of bearings to achieve a narrow clearance range
|
95.99 | ISO/TC 123/SC 5 |
Plain bearings — Quality assurance of thin-walled half bearings — Selective assembly of bearings to achieve a narrow clearance range
|
90.93 | ISO/TC 123/SC 5 |
Foil bearings — Guidelines for testing of the performance of foil journal bearings —Testing of load capacity, friction coefficient and lifetime
|
95.99 | ISO/TC 123/SC 7 |
Foil bearings — Performance testing of foil journal bearings — Testing of static load capacity, friction coefficient and lifetime
|
90.20 | ISO/TC 123/SC 7 |
Plain bearings — Pad materials for tilting pad bearings
|
95.99 | ISO/TC 123/SC 7 |
Plain bearings — Pad materials for tilting pad bearings
|
95.99 | ISO/TC 123/SC 7 |
Plain bearings — Pad materials for tilting pad bearings
|
60.60 | ISO/TC 123/SC 7 |
Plain bearings — Thermoplastic bushes — Dimensions and tolerances
|
95.99 | ISO/TC 123/SC 7 |
Plain bearings — Thermoplastic bushes — Dimensions and tolerances
|
60.60 | ISO/TC 123/SC 7 |
Plain bearings — Lubrication characteristics of crosshead pin bearings for low-speed marine diesel engines
|
60.60 | ISO/TC 123/SC 7 |
Plain bearings — Bearings with embedded solid lubricants
|
95.99 | ISO/TC 123/SC 7 |
Plain bearings — Bearings with embedded solid lubricants
|
60.60 | ISO/TC 123/SC 7 |
Plain bearings with liquid lubrication — Lubricant supply arrangements and monitoring
|
90.93 | ISO/TC 123/SC 3 |
Spherical plain bearings — Derivation of the load rating factors
|
60.60 | ISO/TC 4/SC 8 |
Plain bearings — Bearings containing dispersed solid lubricants
|
95.99 | ISO/TC 123/SC 7 |
Plain bearings — Bearings containing dispersed solid lubricants
|
60.60 | ISO/TC 123/SC 7 |
Plain bearings — Handling of plain bearings
|
90.92 | ISO/TC 123/SC 6 |
Plain bearings — Handling of plain bearings
|
40.99 | ISO/TC 123/SC 6 |
Plain bearings — Spray nozzle type directed lubrication for tilting pad bearings
|
60.60 | ISO/TC 123/SC 7 |
Plain bearings — Automotive engine bearing test rig using actual connecting rods — Part 1: Test rig
|
60.60 | ISO/TC 123/SC 2 |
Foil bearings — Performance testing of foil thrust bearings — Testing of static load capacity, bearing torque, friction coefficient and lifetime
|
90.93 | ISO/TC 123/SC 7 |
Plain bearings — Fluid film bearing materials for vehicular turbocharger
|
95.99 | ISO/TC 123/SC 7 |
Plain bearings — Fluid film bearing materials for vehicular turbocharger
|
60.60 | ISO/TC 123/SC 7 |
Plain bearings — Surface modification by press fitting solid lubricants combined with micro dimple processing
|
60.60 | ISO/TC 123/SC 7 |
Spherical plain bearings — Spherical plain bearings rod ends for hydraulic fluid power cylinders
|
60.60 | ISO/TC 4/SC 7 |
Plain bearings — Recommendations for automotive crankshaft bearing environments
|
95.99 | ISO/TC 123/SC 3 |
Plain bearings — Hydrodynamic plain journal bearings under steady-state conditions — Part 1: Calculation of multi-lobed and tilting pad journal bearings
|
40.00 | ISO/TC 123/SC 8 |
Plain bearings — Hydrodynamic plain journal bearings under steady-state conditions — Part 1: Calculation of multi-lobed and tilting pad journal bearings
|
90.92 | ISO/TC 123/SC 8 |
Plain bearings — Hydrodynamic plain journal bearings under steady-state conditions — Part 2: Functions for calculation of multi-lobed journal bearings
|
40.00 | ISO/TC 123/SC 8 |
Plain bearings — Hydrodynamic plain journal bearings under steady-state conditions — Part 2: Functions for calculation of multi-lobed journal bearings
|
90.92 | ISO/TC 123/SC 8 |
Plain bearings — Hydrodynamic plain journal bearings under steady-state conditions — Part 3: Functions for calculation of tilting pad journal bearings
|
40.00 | ISO/TC 123/SC 8 |
Plain bearings — Hydrodynamic plain journal bearings under steady-state conditions — Part 3: Functions for calculation of tilting pad journal bearings
|
90.92 | ISO/TC 123/SC 8 |
Plain bearings — Hydrodynamic plain journal bearings under steady-state conditions — Part 4: Permissible operational parameters for calculation of multi-lobed and tilting pad journal bearings
|
40.00 | ISO/TC 123/SC 8 |
Plain bearings — Hydrodynamic plain journal bearings under steady-state conditions — Part 4: Permissible operational parameters for calculation of multi-lobed and tilting pad journal bearings
|
90.92 | ISO/TC 123/SC 8 |
No matching records found. Please try changing the filter settings.