Filter :
Standard and/or project | Stage | TC |
---|---|---|
Plastics — Determination of flammability characteristics of rigid plastics in the form of small specimens in contact with an incandescent rod
|
95.99 | ISO/TC 61/SC 4 |
Conveyor belts — Laboratory scale flammability characteristics — Requirements and test method
|
95.99 | ISO/TC 41/SC 3 |
Conveyor belts — Laboratory scale flammability characteristics — Requirements and test method
|
95.99 | ISO/TC 41/SC 3 |
Conveyor belts — Laboratory scale flammability characteristics — Requirements and test method
|
60.60 | ISO/TC 41/SC 3 |
Plastics — Determination of temperature of evolution of flammable gases (decomposition temperature) from a small sample of pulverized material
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Determination of ignition temperature using a hot-air furnace
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Determination of ignition temperature using a hot-air furnace
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Determination of ignition temperature using a hot-air furnace
|
60.60 | ISO/TC 61/SC 4 |
Textile glass reinforced plastics — Determination of loss on ignition
|
95.99 | ISO/TC 61/SC 13 |
Plastics — Determination of flammability characteristics of plastics in the form of small specimens in contact with a small flame
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Determination of flammability and burning rate of plastics in the form of film
|
95.99 | ISO/TC 61 |
Light measuring system for smoke emission testing
|
60.60 | ISO/TC 92/SC 1 |
Cellular plastic and cellular rubber materials — Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame
|
95.99 | ISO/TC 45 |
Flexible cellular polymeric materials — Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame
|
90.93 | ISO/TC 45/SC 4 |
Flexible cellular polymeric materials — Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame — Amendment 1
|
60.60 | ISO/TC 45/SC 4 |
Road vehicles — Determination of burning behaviour of interior materials for motor vehicles
|
95.99 | ISO/TC 22 |
Road vehicles, and tractors and machinery for agriculture and forestry — Determination of burning behaviour of interior materials
|
90.60 | ISO/TC 22 |
Plastics — Determination of burning behaviour by oxygen index — Part 1: Guidance
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Determination of burning behaviour by oxygen index — Part 1: General requirements
|
90.93 | ISO/TC 61/SC 4 |
Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test — Amendment 1
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test
|
90.93 | ISO/TC 61/SC 4 |
Plastics — Determination of burning behaviour by oxygen index — Part 3: Elevated-temperature test
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Determination of burning behaviour by oxygen index — Part 3: Elevated-temperature test
|
90.93 | ISO/TC 61/SC 4 |
Plastics — Determination of burning behaviour by oxygen index — Part 4: High gas velocity test
|
60.60 | ISO/TC 61/SC 4 |
Plastics — Determination of flammability by oxygen index
|
95.99 | ISO/TC 61/SC 4 |
Burning behaviour of textiles and textile products — Vocabulary
|
95.99 | ISO/TC 38 |
Burning behaviour of textiles and textile products — Vocabulary
|
95.99 | ISO/TC 38 |
Burning behaviour of textiles and textile products — Vocabulary — Amendment 1
|
95.99 | ISO/TC 38 |
Burning behaviour of textiles and textile products — Vocabulary — Amendment 2
|
95.99 | ISO/TC 38 |
Burning behaviour of textiles and textile products — Vocabulary
|
90.93 | ISO/TC 38 |
Plastics — Smoke generation — Part 1: Guidance on optical-density testing
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test — Technical Corrigendum 1
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test
|
90.92 | ISO/TC 61/SC 4 |
Plastics — Smoke generation — Part 3: Determination of optical density by a dynamic-flow method
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Smoke generation — Determination of optical density by a single-chamber test
|
40.20 | ISO/TC 61/SC 4 |
Evaluation of physical parameters of filter paper substrates for the determination of the ignition propensity of cigarettes
|
60.60 | ISO/TC 92/SC 1 |
Fire hazard and the design and use of fire tests
|
95.99 | ISO/TC 92 |
Textile fabrics — Burning behaviour — Determination of ease of ignition of vertically oriented specimens
|
95.99 | ISO/TC 38 |
Textile fabrics — Burning behaviour — Determination of ease of ignition of vertically oriented specimens — Amendment 1
|
95.99 | ISO/TC 38 |
Textile fabrics — Burning behaviour — Determination of ease of ignition of vertically oriented specimens
|
90.92 | ISO/TC 38 |
Textile fabrics — Burning behaviour — Measurement of flame spread properties of vertically oriented specimens
|
95.99 | ISO/TC 38 |
Textile fabrics — Burning behaviour — Measurement of flame spread properties of vertically oriented specimens — Amendment 1
|
95.99 | ISO/TC 38 |
Textile fabrics — Burning behaviour — Measurement of flame spread properties of vertically oriented specimens
|
90.92 | ISO/TC 38 |
Wheelchairs — Part 16: Resistance to ignition of upholstered parts — Requirements and test methods
|
95.99 | ISO/TC 173/SC 1 |
Wheelchairs — Part 16: Resistance to ignition of postural support devices
|
95.99 | ISO/TC 173/SC 1 |
Rubber and plastics hoses for underground mining — Method of test for flammability
|
95.99 | ISO/TC 45/SC 1 |
Rubber and plastics hoses — Method of test for flammability
|
95.99 | ISO/TC 45/SC 1 |
Rubber and plastics hoses — Method of test for flammability
|
90.60 | ISO/TC 45/SC 1 |
Furniture — Assessment of the ignitability of upholstered furniture — Part 1: Ignition source: smouldering cigarette
|
90.93 | ISO/TC 136 |
Furniture — Assessment of ignitability of upholstered furniture — Part 2: Ignition source: match-flame equivalent
|
90.93 | ISO/TC 136 |
Test for sustained combustibility of liquids
|
95.99 | ISO/TC 35/SC 9 |
Paints and varnishes — Determination of the ability of liquid paints to sustain combustion
|
95.99 | ISO/TC 35/SC 9 |
Determination of sustained combustibility of liquids
|
95.99 | ISO/TC 28 |
Determination of sustained combustibility of liquids
|
90.92 | ISO/TC 28 |
Determination of sustained combustibility of liquids
|
40.60 | ISO/TC 28 |
Reaction to fire tests — Horizontal surface spread of flame on floor-covering systems — Part 1: Flame spread using a radiant heat ignition source
|
95.99 | ISO/TC 92/SC 1 |
Reaction to fire tests — Horizontal surface spread of flame on floor-covering systems — Part 1: Flame spread using a radiant heat ignition source — Technical Corrigendum 1
|
95.99 | ISO/TC 92/SC 1 |
Reaction to fire tests — Horizontal surface spread of flame on floor-covering systems — Part 1: Flame spread using a radiant heat ignition source — Technical Corrigendum 2
|
95.99 | ISO/TC 92/SC 1 |
Reaction to fire tests for floorings — Part 1: Determination of the burning behaviour using a radiant heat source
|
95.99 | ISO/TC 92/SC 1 |
Reaction to fire tests for floorings — Part 1: Determination of the burning behaviour using a radiant heat source
|
90.92 | ISO/TC 92/SC 1 |
Reaction to fire tests for floorings — Part 1: Determination of the burning behaviour using a radiant heat source
|
40.60 | ISO/TC 92/SC 1 |
Reaction to fire tests for floorings — Part 2: Determination of flame spread at a heat flux level of 25 kW/m2
|
95.60 | ISO/TC 92/SC 1 |
Textiles — Design of apparel for reduced fire hazard
|
60.60 | ISO/TC 38 |
Cellular plastics — Determination of horizontal burning characteristics of small specimens subjected to a small flame
|
95.99 | ISO/TC 61/SC 4 |
Cellular plastics — Determination of horizontal burning characteristics of small specimens subjected to a small flame
|
95.99 | ISO/TC 61/SC 4 |
Cellular plastics — Determination of horizontal burning characteristics of small specimens subjected to a small flame — Amendment 1: Specimens
|
95.99 | ISO/TC 61/SC 4 |
Cellular plastics — Determination of horizontal burning characteristics of small specimens subjected to a small flame
|
95.99 | ISO/TC 61/SC 4 |
Cellular plastics — Determination of horizontal burning characteristics of small specimens subjected to a small flame
|
60.60 | ISO/TC 61/SC 4 |
Plastics — Determination of burning behaviour of flexible vertical specimens in contact with a small-flame ignition source
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source — Amendment 1: Specimens
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Determination of burning behaviour of thin flexible vertical specimens in contact with a small flame ignition source
|
60.60 | ISO/TC 61/SC 4 |
Textiles — Determination of surface burning time of fabrics
|
90.92 | ISO/TC 38 |
Plastics — Fire tests — Standard ignition sources
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Fire tests — Standard ignition sources
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Fire tests — Standard ignition sources — Technical Corrigendum 1
|
95.99 | ISO/TC 61 |
Plastics — Fire tests — Standard ignition sources
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Fire tests — Standard ignition sources
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Fire tests — Standard ignition sources
|
60.60 | ISO/TC 61/SC 4 |
Plastics — Determination of the combustibility of specimens using a 125 mm flame source
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Survey of ignition sources used for national and international fire tests
|
95.99 | ISO/TC 61/SC 4 |
Textiles — Commercial laundering procedure for textile fabrics prior to flammability testing
|
90.93 | ISO/TC 38/SC 2 |
Plastics — Guidance for the use of standard fire tests
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Burning behaviour — Guidance for development and use of fire tests
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Burning behaviour — Guidance for development and use of fire tests — Technical Corrigendum 1
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Guidance for the use of standard fire tests
|
90.92 | ISO/TC 61/SC 4 |
Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 1: Guidance
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 1: General concepts and applicability
|
90.20 | ISO/TC 61/SC 4 |
Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 2: Static method
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 3: Dynamic decomposition method using a travelling furnace
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 4: Dynamic decomposition method using a conical radiant heater
|
90.60 | ISO/TC 61/SC 4 |
Reaction to fire tests — Measurement of material properties using a fire propagation apparatus
|
90.93 | ISO/TC 92/SC 1 |
Textiles — Domestic laundering procedures for textile fabrics prior to flammability testing
|
95.99 | ISO/TC 38/SC 2 |
Textiles — Domestic laundering procedures for textile fabrics prior to flammability testing
|
90.93 | ISO/TC 38/SC 2 |
Fire-resistance tests — Guidance on the application and extension of results from tests conducted on fire containment assemblies and products — Part 1: Loadbearing elements and vertical and horizontal separating elements
|
60.60 | ISO/TC 92/SC 2 |
Fire-resistance tests — Guidance on the application and extension of results from tests conducted on fire containment assemblies and products — Part 2: Non-loadbearing elements
|
60.60 | ISO/TC 92/SC 2 |
Fire-resistance tests — Guidance on the application and extension of results
|
95.99 | ISO/TC 92/SC 2 |
Standard test method for assessing the ignition propensity of cigarettes
|
95.99 | ISO/TC 92/SC 1 |
Standard test method for assessing the ignition propensity of cigarettes — Amendment 1
|
95.99 | ISO/TC 92/SC 1 |
Standard test method for assessing the ignition propensity of cigarettes — Technical Corrigendum 1
|
95.99 | ISO/TC 92/SC 1 |
Standard test method for assessing the ignition propensity of cigarettes
|
60.60 | ISO/TC 92/SC 1 |
Textiles — Burning behaviour of bedding items — Part 1: General test methods for the ignitability by a smouldering cigarette
|
95.99 | ISO/TC 38 |
Textiles — Assessment of the ignitability of bedding items — Part 1: Ignition source: smouldering cigarette
|
90.93 | ISO/TC 38 |
Textiles — Burning behaviour of bedding items — Part 2: Specific test methods for the ignitability by a smouldering cigarette
|
95.99 | ISO/TC 38 |
Textiles — Assessment of the ignitability of bedding items — Part 2: Ignition source: match-flame equivalent
|
90.93 | ISO/TC 38 |
Textiles — Burning behaviour of bedding items — Part 3: General test methods fot the ignitability by a small open flame
|
95.99 | ISO/TC 38 |
Textiles — Burning behaviour of bedding items — Part 4: Specific test methods for the ignitability by a small open flame
|
95.99 | ISO/TC 38 |
Plastics — Vertical flame spread determination for film and sheet
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Vertical flame spread determination for film and sheet
|
90.93 | ISO/TC 61/SC 4 |
Rubber and plastics hoses for fuels for internal-combustion engines — Method of test for flammability
|
90.60 | ISO/TC 45/SC 1 |
Space systems — Safety and compatibility of materials — Part 1: Determination of upward flammability of materials
|
95.99 | ISO/TC 20/SC 14 |
Space systems — Safety and compatibility of materials — Part 1: Determination of upward flammability of materials
|
60.60 | ISO/TC 20/SC 14 |
Space systems — Safety and compatibility of materials — Part 2: Determination of flammability of electrical-wire insulation and accessory materials
|
95.99 | ISO/TC 20/SC 14 |
Space systems — Safety and compatibility of materials — Part 2: Determination of flammability of electrical-wire insulation and accessory materials
|
60.60 | ISO/TC 20/SC 14 |
Space systems — Safety and compatibility of materials — Part 4: Determination of upward flammability of materials in pressurized gaseous oxygen or oxygen-enriched environments
|
90.60 | ISO/TC 20/SC 14 |
Reaction-to-fire tests — Determination of fire and thermal parameters of materials, products and assemblies using an intermediate-scale calorimeter (ICAL)
|
90.93 | ISO/TC 92/SC 1 |
Reaction to fire tests — Determination of fire parameters of materials, products and assemblies using an intermediate-scale heat release calorimeter (ICAL)
|
95.99 | ISO/TC 92/SC 1 |
Fire tests — Calibration and use of heat flux meters — Part 1: General principles
|
90.93 | ISO/TC 92/SC 1 |
Fire tests — Calibration and use of radiometers and heat flux meters — Part 1: General principles
|
95.99 | ISO/TC 92/SC 1 |
Fire tests — Calibration and use of heat flux meters — Part 2: Primary calibration methods
|
95.99 | ISO/TC 92/SC 1 |
Fire tests — Calibration and use of heat flux meters — Part 2: Primary calibration methods
|
90.93 | ISO/TC 92/SC 1 |
Fire tests — Calibration and use of heat flux meters — Part 3: Secondary calibration method
|
95.99 | ISO/TC 92/SC 1 |
Fire tests — Calibration and use of heat flux meters — Part 3: Secondary calibration method
|
90.93 | ISO/TC 92/SC 1 |
Fire tests — Calibration and use of heat flux meters — Part 4: Guidance on the use of heat flux meters in fire tests
|
90.93 | ISO/TC 92/SC 1 |
Fire tests — Calibration of heat flux meters — Part 4: Guidance on the use of heat flux meters in fire tests
|
95.99 | ISO/TC 92/SC 1 |
Petroleum and related products — Determination of spray ignition characteristics of fire-resistant fluids — Part 1: Spray flame persistence — Hollow-cone nozzle method
|
90.93 | ISO/TC 28 |
Petroleum and related products — Determination of spray ignition characteristics of fire-resistant fluids — Part 2: Spray test — Stabilised flame heat release method
|
90.93 | ISO/TC 28 |
Petroleum and related products — Determination of spray ignition characteristics of fire-resistant fluids — Part 2: Spray test — Stabilized flame heat release method
|
95.99 | ISO/TC 28 |
Fire resistance — Tests for thermo-physical and mechanical properties of structural materials at elevated temperatures for fire engineering design
|
95.99 | ISO/TC 92/SC 2 |
Fire resistance — Tests for thermo-physical and mechanical properties of structural materials at elevated temperatures for fire engineering design
|
60.60 | ISO/TC 92/SC 2 |
Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 1: General guidance
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 1: General guidance
|
90.93 | ISO/TC 61/SC 4 |
Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 2: Use of intermediate-scale tests for semi-finished and finished products
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 2: Use of intermediate-scale tests for semi-finished and finished products
|
60.60 | ISO/TC 61/SC 4 |
Furniture — Assessment of the ignitability of mattresses and upholstered bed bases — Part 1: Ignition source: smouldering cigarette
|
60.60 | ISO/TC 136 |
Furniture — Assessment of the ignitability of mattresses and upholstered bed bases — Part 2: Ignition source: match flame equivalent
|
60.60 | ISO/TC 136 |
Space systems — Safety and compatibility of materials - Method to determine the flammability thresholds of materials
|
95.99 | ISO/TC 20/SC 14 |
Fire tests — Applicability of reaction to fire tests to fire modelling and fire safety engineering
|
95.99 | ISO/TC 92/SC 1 |
Fire tests — Applicability of reaction to fire tests to fire modelling and fire safety engineering
|
60.60 | ISO/TC 92/SC 1 |
Fire tests— Reduced-scale model box test
|
90.60 | ISO/TC 92/SC 1 |
Reaction to fire tests — Mass loss measurement
|
95.99 | ISO/TC 92/SC 1 |
Reaction to fire tests — Mass loss measurement
|
90.93 | ISO/TC 92/SC 1 |
Test method for determination of gas concentrations in ISO 5659-2 using Fourier transform infrared spectroscopy
|
90.93 | ISO/TC 92/SC 1 |
Fire tests — Use of LED (light-emitting diode) as an alternative to white light for measuring smoke parameters
|
60.60 | ISO/TC 92/SC 1 |
Plastics — Reaction to fire — Test method for flame spread and combustion product release from vertically oriented specimens
|
90.93 | ISO/TC 61/SC 4 |
Plastics — Microscale Combustion Calorimetry/Pyrolysis combustion flow calorimetry — Part 2: Fingerprinting of plastics
|
30.98 | ISO/TC 61/SC 4 |
Plastics — Intumescence properties of PVC materials and products — Test method for the measurement of expansion with the cone calorimeter
|
60.60 | ISO/TC 61/SC 4 |
Plastics — Application of spread of flame test to plastic pipes
|
60.60 | ISO/TC 61/SC 4 |
Fire tests — Open calorimetry — Measurement of the rate of production of heat and combustion products for fires of up to 40 MW
|
90.93 | ISO/TC 92/SC 1 |
Plastics — Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites
|
90.93 | ISO/TC 61/SC 4 |
Plastics — Burning behaviour — Intermediate-scale fire-resistance testing of fibre-reinforced polymer composites
|
90.60 | ISO/TC 61/SC 4 |
Fire hazard testing — Part 11-10: Test flames — 50 W horizontal and vertical flame test methods
|
95.99 | ISO/TC 61/SC 4 |
Fire hazard testing — Part 11-20: Test flames — 500 W flame test methods
|
95.99 | ISO/TC 61/SC 4 |
Fire hazard testing — Part 11-10: Test flames — 50 W horizontal and vertical flame test methods — Amendment 1
|
95.99 | ISO/TC 61/SC 4 |
Fire hazard testing — Part 11-20: Test flames — 500 W flame test methods — Amendment 1
|
95.99 | ISO/TC 61/SC 4 |
No matching records found. Please try changing the filter settings.